Z-BLOCKER® Z-330TJA Description The Z-330TJA is a small, ANSI T1.421 compliant in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) and home phone line network (HPN) services. This model filters all telephone sets, facsimile machines, answering machines, etc. individually or in groups and includes an additional unfiltered jack for use with an xDSL modem and/or HomePNA device. Our in-line filter design electronically isolates the high-speed DSL and HPN data streams from the voice band plain old telephone service (POTS). This third order filter design effectively blocks the xDSL, HPN and other radio frequencies up to 30 Megahertz (MHz). Z-BLOCKER® Z-330TJA ● Compliant with ANSI T1.421, FCC CFR 47 Part 68; UL/CSA 60950 ● RoHS and WEEE Compliant Features ● CE Mark certified ● Isolates telephone equipment impedances from the xDSL and HPN systems Applications ● Provides a convenient DSL/HPN jack for easy broadband access The Z-330TJA filter is used with other Z-BLOCKER® filters distributed throughout the subscribers' premises to isolate all voice band equipment devices such as corded/cordless telephones, answering machines, fax machines, 56Kb/s and lower rate modems, automatic dialers, recorder connectors and satellite television set-top boxes. ● Attenuates DSL & HPN signals to phone equipment to prevent conversion to voice band signals ● Attenuates HPN signals to unbalanced phone equipment to prevent radiation into electronic equipment ● Attenuats radio signals picked up by an unbalanced telephone acting as an antenna from affecting DSL or HPN receivers RJ11-PLUG ● Minimizes voice band interference --transmission, signaling and supervision ● Compatible with all major xDSL standards including ADSL Full Rate (ITU-T G.992.1), ADSL G.Lite (ITU-T G.992.2), ADSL2 (ITU- T G.992.3 and .4), ADSL2+ (ITU-T G.992.5 in analog mode) ADSL2++, VDSL (ITU-T G.993.1), VDSL2; also V.90 and Metallic Loop Testing compatible www.PulseElectronics.com 6 5 4 3 2 1 RJ11-PLUG 6 5 4 3 2 1 RJ11-JACK RJ11-JACK 6 5 4 LINE 1 3 2 1 6 5 4 PHONE 3 2 1 RJ11-JACK DETACHABLE SHORT CORD 6 5 4 DSL 3 2 1 Z-BLOCKER® Z-330TJA block schematic EX135.A (02/12) Z-BLOCKER® Z-330TJA Z-BLOCKER Z-330TJA Filter Specifications DC Resistance Network port at 20mA <25Ω Tip and Ring to Ground at < 100 Vdc >10 MΩ Tip and Ring to Ground at > 100 Vdc and < 200 Vdc >30 kΩ Operating Current 5 to 90mA Operating Voltages Network tip to ring 0 to -80Vdc Network tip to ring level with ringing signal of 17 to 23Hz and 40 to 106 Vrms -20 to -80Vdc On-hook Voice Band Insertion Loss Single filter -0.5dB to 1.5dB With 5 filters -1.0dB to 6.5dB On-hook Voice Band Insertion Loss Distortion Single filter, 200 to 1000 Hz -1.5dB to 1.5dB With 5 filters, 200 to 1000 Hz -5.5dB to 2.0dB Single filter, 1 to 2.8 kHz -1.5dB to 1.5dB With 5 filters, 1 to 2.8 kHz -2.0dB to 2.0dB On- or Off-hook Envelope Delay 300 Hz - 2800 Hz <250μs Off-hook Voice Band Insertion Loss Single filter -0.5dB to 0.5dB With 5 filters -1.0dB to 1.0dB Off-hook Voice Band Insertion Loss Distortion Single filter, 200 to 3400 Hz -1.0dB to 0.5dB With 5 filters, 200 to 3400 Hz -1.5dB to 2.5dB Single filter, 3.4 to 4 kHz -1.5dB to 1.0dB With 5 filters, 3.4 to 4 kHz -2.0dB to 3.25dB Off-hook impedance distortion Phone Port SRL Low >13dB " ERL >9dB " SRL High >3dB Network Port SRL Low >12dB " ERL >10dB " SRL High >5dB Inter-Modulation Distortion Second and Third order products >60dB On-hook High Band Stopband Attenuation From 25 to 50 kHz, between 20 and 90 mA >12dB From 50 k to 12 MHz between 20 and 90 mA >12dB Off-hook High Band Stopband Attenuation From 25 to 50 kHz, between 20 and 90 mA >21dB From 25 to 50 kHz, between 7 and 20 mA >13dB From 50 k to 12 MHz, between 20 and 90 mA >25dB From 50 k to 12 MHz, between 7 and 20 mA >22dB Bridging Loss Single filter, 25 kHz to 1.2 MHz <0.5dB With 5 filters, 25 kHz to 1.2 MHz <1.25dB Single filter, 25 kHz to 1.2 MHz <3.0dB With 5 filters, 25 kHz to 1.2 MHz <4.0dB Isolates dial pulses and on-hook/off-hook transitions from the Digital Subscriber Line Dimensions: Length 2.0in (51.3mm), Width 1.2in (30.5mm), Height 0.75in (19.1mm), Cord Length = approx. 4.0 in (102mm) Pulse Singapore - 135 Joo Seng Rd.#03-02PM Industrial Bldg.Singapore 368363 Tel: +65 6287 8998 Pulse Taiwan - 3F, #198, Zhongyuan Rd., Zhongli City Taoyuan, County 32068, Taiwan Tel: +886 3435 6768 Pulse US - 12220 World Trade Drive, San Diego, CA. 92128 Tel: +1 858 674 8100 www.pulseelectronics.com Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Electronics. © 2012 Pulse Electronics. EX135.A (02/12)