Z-BLOCKER® Z-200SM In-Line Filter Description The Z-200SM is a small in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) services. This model fits all telephone sets, facsimile machines, answering machines, etc. individually or in groups. Our in-line filter design electronically isolates the high-speed DSL and HPN data streams from the voice band plain old telephone service (POTS) equipment. This design effectively blocks the DSL, HPN and other radio frequencies up to 400 Megahertz (MHz). Features ● Isolates telephone equipment impedances from the xDSL and HPN systems ● Attenuate xDSL & HPN signals to phone equipment to prevent conversion to voice band signals ● Attenuate HPN signals to unbalanced phone equipment to prevent radiation into electronic equipment ● Minimize voice band interference --transmission, signaling and supervision ● Excellent longitudinal balance Z-200SM In-Line Filter Applications The Z-200SM filters are used with other Z-BLOCKER® filters distributed throughout the subscribers' premises to isolate all voice band equipment devices such as corded/cordless telephones, answering machines, fax machines, 56Kb/s and lower rate modems, automatic dialers, recorder connectors and satellite television set-top boxes. The Z-200SM-ST in-line DSL filter is one of many filters manufactured by Excelsus for subscriber installed digital services within homes, offices, and hotels. Excelsus is the number one ● Compatible with all major xDSL standards including ADSL Full Rate (ITU-T G.992.1), ADSL G.Lite (ITU-T G.992.2), ADSL2 (ITU- T G.992.3 and .4), ADSL2+ (ITU-T G.992.5 in analog mode), ADSL2++, VDSL (ITU-T G.993.1), VDSL2; also V.90 and Metallic Loop Testing compatible ● FCC 47 CFR Part 68, IC CS-03, UL 60950, and CSA 22.2 No. 60950 compliant and listed ● CE Mark certified ● RoHS and WEEE compliant www.PulseElectronics.com EX130.A (02/12) Z-BLOCKER® Z-200SM In-Line Filter Series 200 Z-BLOCKER® Filter Specifications Line side differential input blocking impedance At 20 kHz >2k At 30 kHz >3k From 5 MHz to 10 MHz >4k From 10 MHz to 400 MHz >2k 1 kHz insertion loss between 600Ω resistive Single filter <0.7 With 5 filters <0.8 1 kHz/2.8 kHz slope between 600Ω resistive Single filter <0.1 With 5 filters <0.8 DC resistance in Ohms Tip to Tip, and Ring to Ring <50 Tip to Ring >10M Longitudinal Balance per IEEE method From 200 - 1 kHz >58 dB From 1 kHz - 3 kHz >53 dB Common mode rejection at 40 kHz and 1.1 MHz >45dB Low pass roll off (slope) between 600 Ohm and ADSL Transmission Unit - Remote >24dB Inter-Modulation Distortion First and Second order products >60dB Envelope Delay 300 Hz - 2800 Hz <100μs 600Ω Return Loss into phone side with 600Ω line termination with ATU-R Single filter SRL Low >25dB ERL >25dB SRL High >24dB +2 bridged filter SRL Low >29dB ERL >22dB SRL High >15dB +4 bridged filter SRL Low >28dB ERL >16dB SRL High >9dB Complex* Return Loss with ATU-R Single filter SRL Low >28dB Single filter ERL >17dB Single filter SRL High >9dB +2 bridged filters SRL Low >20dB ERL >11dB SRL High >6dB +4 bridged filters SRL Low >16dB ERL >8dB SRL High >4dB * 1330Ω in parallel with (100nfd in series with 348Ω) DC Loop Current - Meets specifications between 20 and 100 milliamps DC Isolates dial pulses and on-hook/off-hook transitions from the digital subscriber line Dimensions: Length 2.0in (50.8mm), Width 1.25in (31.75mm), Height .75in (19.05mm), Cord Length = 3.5in (88.9mm) US Pat. No. 6,212,259 and Taiwan Pat. No. 152847 Pulse Singapore - 135 Joo Seng Rd.#03-02PM Industrial Bldg.Singapore 368363 Tel: +65 6287 8998 Pulse Taiwan - 3F, #198, Zhongyuan Rd., Zhongli City Taoyuan, County 32068, Taiwan Tel: +886 3435 6768 Pulse US - 12220 World Trade Drive, San Diego, CA. 92128 Tel: +1 858 674 8100 www.pulseelectronics.com Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Electronics. © 2012 Pulse Electronics. EX130.A (02/12)