SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER FM320 THRU FM3200 VOLTAGE RANGE 20 to 200 Volts CURRENT 3.0 Amperes FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram DO-214AB 0.125 (3.17 ) 0.115 (2.92 ) MECHANICAL DATA 0.245 ( 6.22 ) 0.220 ( 5.59 ) * Epoxy: Device has UL flammability classification 94V-O 0.280 ( 7.11 ) 0.260 ( 6.60 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.103 ( 2.62 ) 0.079 ( 2.06 ) 0.060 ( 1.52 ) 0.030 ( 0.76 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.008 ( 0.203 ) 0.004 ( 0.102 ) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, resistive or inductive load. 0.320 ( 8.13 ) 0.305 ( 7.75 ) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FM320 FM330 FM340 FM350 FM360 FM380 FM3100 FM3150 Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 150 200 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts VDC 20 30 40 50 60 80 100 150 200 Volts RATINGS Maximum DC Blocking Voltage Max Avg Forword Rectify Current at Ambient Temp needs To be corrected to Lead Temperature,TL Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) FM3200 UNITS Volts IO 3.0 Amps I FSM 80 Amps RqJA 55 RqJL 17 0 C/W Typical Junction Capacitance (Note 2) CJ 200 pF Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 3.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C FM320 VF IR NOTES : 1. Thermal Resistance : Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. FM330 .55 FM340 FM350 FM360 .75 FM380 FM3100 FM3150 .85 0.2 2 FM3200 UNITS Volts mA mA 2008-7 REV:A INSTANTANEOUS REVERSE CURRENT, (mA) 3.0 FM3 2.5 M34 200 20~F P.C.B. Mounted on 0.4X0.4"(10 X10mm) copper pad areas 1.5 FM3 50~ 2.0 FM3 0 AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( FM320 THRU FM3200 ) 1.0 0.5 0 0 25 50 75 100 125 150 10 TA = 100 OC 1.0 0.1 0.01 FM320~FM340 FM350~FM360 FM380~FM3200 0.001 0 20 O CJ, JUNCTION CAPACITANCE, (pF) 10 FM320~FM340 FM380~FM3200 1.0 FM350~FM360 TJ = 25 C Pulse width=300mS 1% Duty Cycle O 0.1 0.2 0.3 0.4 0.5 0.6 40 60 0.7 100 120 140 0.8 FIG.2 TYPICAL REVERSE CHARACTERISTICS 500 TJ = 25 OC 200 100 50 20 10 5 0.9 0.1 0.2 INSTANTANEOUS FORWARD VOLTAGE, (V) 0.5 1 2 5 10 20 REVERSE VOLTAGE, (V) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 TYPICAL JUNCTION CAPACITANCE 80 At rated TL 8.3mS Single Half Sine-Wave JEDEC Method 70 60 50 40 30 20 10 1 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE, ( C) 20 TA = 75 OC TA = 25 OC 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121MIN. ( 3.07 MIN.) 0.060 MAX. (1.52 MAX.) 0.320 REF Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.