DB101S RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION DB1012S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1200 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * Surge overload rating - 40 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram DB-S MECHANICAL DATA .310 (7.9) .290 (7.4) * Epoxy : Device has UL flammability classification 94V-0 * UL listed the recognized component directory, file #E94233 .255 (6.5) .245 (6.2) .013 (.330) .003 (.076) .410 (10.4) .360 (9.4) .042 (1.1) .038 (1.0) .009 (0.229) .060 (1.524) .040 (1.016) .346 (8.8) .307 (7.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .135 (3.4) .115 (2.9) Single phase, half wave, 60 Hz, resistive or inductive load. .205 (5.2) .195 (5.0) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL RATINGS DB101S DB102S DB103S DB104S DB105S DB106S DB107S DB1012S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 1200 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 840 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 1200 Maximum Average Forward Output Current at T A = 40 o C Volts IO 1.0 Amps I FSM 40 Amps Typical Thermal Resistance RθJA 40 (Note 1) RθJC 9 T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC o Maximum Reverse Current at rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C 1.1 Volts 5.0 uAmps 0.5 mAmps IR NOTE: 1.Suffix “-s” Surface Mount for Dip Bridge. 2.Units mounted on P.C.B.with 0.5x0.5” (13x13mm) copper pads. 3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. DB101S DB102S DB103S DB104S DB105S DB106S DB107S DB1012S UNITS 2005-2 REV:A RATING AND CHARACTERISTIC CURVES ( DB101S THRU DB1012S ) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 1.0 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 60 0 Single Phase Half Wave 60Hz Inductive or Resistive Load 0 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 Pulse Width = 300us 1% Duty Cycle 1.0 TJ = 25 0.1 20 100 .01 40 60 80 100 120 140 AMBIENT TEMPERATURE, ( ) 160 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) 0 INSTANTANEOUS FORWARD CURRENT, (A) .5 10 1.0 TJ = 25 0.1 .01 .4 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON Mounting Pad Layout 0.404 MAX. (10.26 MAX.) 0.205 (5.2) 0.195 (5.0) 0.047 MIN. (1.20 MIN.) 0.060 MIN. (1.52 MIN.) Dimensions in inches and (millimeters) RECTRON