DB101-SPT CHENMKO ENTERPRISE CO.,LTD THRU SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere DB107-SPT FEATURES * * * * * Reliable low cost construction utilizing molded Surge overload rating of 50 Amperes peak Glass passivated device Ideal for printed circuit board Polarity symbols molded on body DB-S 0.310(7.9) 0.290(7.4) 0.255(6.5) 0.245(6.2) MECHANICAL DATA Case: JEDEC DB-S molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Mounting position: Any Polarity: Indicated by cathode band Weight: 1.0 gram 0.013(.330) 0.003(.076) 0.042(1.1) 0.038(1.0) 0.009 (0.23) 0.410(10.4) 0.06(1.524) 0.360(9.4) 0.04(1.016) 0.365(9.3) 0.355(9.0) 0.135(3.4) 0.115(2.9) 0.205(5.2) 0.195(5.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. DB-S Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL DB101-SPT DB102-SPT DB103-SPT DB104-SPT DB105-SPT DB106-SPT DB107-SPT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current TA = 40oC IO 1.0 Amps IFSM 50 Amps TJ, TSTG -55 to +150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum Reverse Current at rated SYMBOL DB101-SPT DB102-SPT DB103-SPT DB104-SPT DB105-SPT DB106-SPT DB107-SPT UNITS VF 1.1 Volts 5.0 uAmps 0.5 mAmps @ TA = 25oC IR DC blocking Voltage per element NOTES : Suffix " -S " Surface Mount for Dip Bridge. @ TA = 125oC 2002-5 RATING CHARACTERISTIC CURVES ( DB101-SPT THRU DB107-SPT ) 1.00 0.75 0.50 Single Half Wave 60HZ Resistive or Inductive Load 0.25 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.25 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 0 2 AMBIENT TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 6 8 10 10 20 10 TJ = 25oC 1.0 4 NUMBER OF CYCLES AT 60HZ 0.1 PULSE WIDTH=300uS 1% DUTY CYCLE .01 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.6 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)