BDB101 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION BDB107 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 40 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram BDB FEATURES .240 (6.1) .232 (5.9) .079 (2) * Epoxy : UL flammability classification 94V-0 * UL listed under the recognized component directory, file #E94233. .303 (7.7) .295 (7.5) .350 (8.9) .300 (7.6) .413 (10.5) .398 (10.1) .035 (0.9) .031 (0.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .020 (0.5) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .135 (3.4) .115 (2.9) .315 MAX. (8.0) .094 (2.4) .071 (1.8) .307 (7.8) .291 (7.4) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL RATINGS BDB101 BDB102 BDB103 BDB104 BDB105 BDB106 BDB107 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Output Current at T A = 40 oC Volts IO 1.0 Amps I FSM 40 Amps Typical Thermal Resistance from junction to case RθJL 10 0 Typical Thermal Resistance from junction to ambient RθJA 65 Operating and Storage Temperature Range T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC o Maximum Forward Voltage Drop per Bridge @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. IR BDB101 BDB102 BDB103 BDB104 BDB105 BDB106 BDB107 UNITS 1.1 Volts 5.0 uAmps 0.5 mAmps 2005-3 REV: A RATING AND CHARACTERISTIC CURVES ( BDB101 THRU BDB107 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 60 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 Single Phase Half Wave 60Hz Inductive or Resistive Load 0 0 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 Pulse Width = 300us 1% Duty Cycle 1.0 TJ = 25 0.1 .01 .4 20 INSTANTANEOUS REVERSE CURRENT, (uA) 0 INSTANTANEOUS FORWARD CURRENT, (A) .5 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, ( ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 1.0 TJ = 25 0.1 .01 .6 .8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.4 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON 140