RFMD 2014 NEW PRODUCT GUIDE RFMD is a global leader addressing the RF industry’s complex challenges by delivering a broad portfolio of high-performance RF components for a diverse range of applications and end markets. Our product leadership, extensive portfolio breadth, and exceptional technical support enable us to accelerate our customers’ time to market. AS9100, ISO 9001: 2008 Certified, ISO 14001: 2004 Certified, ISO/TS 16949: 2009 Certified, OHSAS 18001: 2007 Certified RFMD®is a registered trademark of RFMD, LLC. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2014 RFMD. New Products Preview pHEMT Low Noise Amplifiers • Low noise figure <1.0dB • Excellent output power • Versatile with extended frequency ranges Freq. Range (Min) (MHz) 400 1500 Freq Range (Max) (MHz) 1500 3000 Small Signal Gain (dB) 17.5 17 NF (dB) 0.43 0.45 OP1dB (dBm) 23 22.5 OIP3 (dBm) 46.5 38 Vcc (V) 5 5 Icc (mA) 120 60 Package (mm) DFN, 2 x 2 DFN, 2 x 2 Part Number RFLA1022 RFLA3022 Digital Variable Gain Amplifiers • Amplifiers with digital step attenuators • Serial and dual channels available • High linearity power control Freq. Range (Min) (MHz) 50 Freq Range (Max) (MHz) 4000 Number of Bits 6 Gain (dB) 17.5 Step Size (dB) 0.5 P1dB (dBm) 19 OIP3 (dBm) 33 Channels One Vcc (V) 5 Icc (mA) 82 Package (mm) MCM 5.2 x 5.2 Part Number RFDA4005 Digital Step Attenuator • Broadband 50MHz to 4000MHz operation • Single supply, 3V to 5V operation • High linearity, wireless infrastructure grade performance Freq. Range (Min) (MHz) 50 50 50 50 50 Freq Range (Max) (MHz) 4000 4000 4000 4000 4000 Number Step size of bits (dB) 5 1 6 0.5 7 0.25 7 0.25 7 0.25 Attenuation Insertion Range IP1dB IIP3 Loss (dB) (dBm) (dBm) (dB) Interface 31 30 50 1.4 Serial 31.5 30 50 1.4 Serial 31.75 30 50 1.4 Serial 31.75 30 50 1.5 Serial & Parallel 31.75 30 50 1.5 Serial & Parallel Vcc (V) 5 5 5 5 5 Package (mm) QFN, 3 x 3 QFN, 3 x 3 QFN, 3 x 3 QFN 4 x 4 QFN, 5 x 5 Part Number RFSA3513 RFSA3613 RFSA3713 RFSA3714 RFSA3715 Wi-Fi and Connectivity High Power Amplifiers • Power amplifiers (PA) designed for 802.11a/b/g/n/ac applications • Capable of achieving maximum linear powers with an EVM <1.8% while maintaining excellent power added efficiency • Covers multiple power classes for Wi-Fi consumer premise equipment, set-top box, router, AP, and infrastructure applications Freq. Range (Min) (GHz) 2.4 4.9 4.9 Freq Range (Max) (GHz) 2.5 5.825 5.85 Gain (dB) 40 30 31 Vcc (V) 5 5 5 Package Laminate 4 x 4 x 1.05 Laminate 4 x 4 x 1 QFN 4 x 4 x 1.05 EVM (%) 3 1.8 1.8 Linear Pout (dBm) 28 21 23 Current at Po (mA) 590 400 315 Part Number RFPA5208 RFPA5502 RFPA5512 2014 • RFMD® New Products Guide 1 NEW PRODUCTS PREVIEW Wi-Fi CPE Front End Modules • Complete integrated solution in a single front end module (FEM) for Wi-Fi 802.11a/n/ac systems • Integrated power amplifier (PA), single pole two throw switch (SP2T) and an LNA with bypass • Industry standard 3.0mm x 3.0mm x 1.0mm, 16-pin laminate package Freq. Range (Min) (GHz) 4.9 Freq Range (Max) (GHz) 5.85 Gain (dB) 29.5 Vcc (V) 3.3 Package Laminate 3 x 3 x 1 EVM (%) 1.8 Linear Pout (dBm) 17.5 Current at Po (mA) 260 Part Number RFFM4503 Wi-Fi CPE Switch/LNA • Designed specifically for high-performance Wi-Fi applications in the 5GHz ISM band • Integrated LNA with bypass and a SPDT switch Freq. Range (Min) (GHz) Freq Range (Max) (GHz) 4.9 5.85 NF OP1dB OIP3 (dB) (dBm) (dBm) 2.4 7 19 Vcc Icc P1dB Insertion Loss IIP3 NF LNA Gain Switch (V) (mA) Package (dBm) (Min) (dB) (dBm) (dB) (dB) Type Part Number 2.7 to 17 QFN 2 x 2 31 1 3 2.4 16 SP2T RFFM5541 4.2 x 0.5 2.5GHz Wi-Fi Front End Modules • Complete integrated solution in a single front end module (FEM) for Wi-Fi 802.11b/g/n/ac and Bluetooth systems • Integrated 2.5GHz power amplifier (PA), single pole triple throw switch (SP3T) and variants, LNA with bypass, and a power detector coupler for improved accuracy • Optimal linear power capability matched with advanced power added efficiency performance Freq. Range (Min) (GHz) 2.4 2.4 2.412 Freq Range (Max) (GHz) 2.5 2.5 2.484 Gain (dB) 26 27 27 Vcc (V) 3.0 to 4.2 3.3 3.3 Package QFN 2.5 x 2.5 x 0.40 QFN 2.3 x 2.3 x 0.33 QFN 2.3 x 2.3 x 0.33 EVM (%) 1.3 2.5 2 Linear Pout (dBm) 18 19.5 20 Current at Po (mA) 145 195 195 Part Number RFFM8211 RFFM8215 RFFM8228 5GHz Wi-Fi Front End Modules • Complete integrated solution in a single front end module (FEM) for Wi-Fi 802.11a/n/ac systems • Integrated 5GHz power amplifier (PA), single pole double throw switch (SP2T) and variants, LNA with bypass, and a power detector coupler for improved accuracy • Optimal linear power capability matched with advanced power added efficiency performance Freq. Range (Min) (GHz) 4.9 4.9 5.18 5.18 2 Freq Range (Max) (GHz) 5.85 5.85 5.825 5.825 Gain (dB) 28 28 28 28 Vcc (V) 3.6 1.8 1.8 1.8 2014 • RFMD® New Products Guide Package QFN 2.5 x 2.5 x 0.40 QFN 2.3 x 2.3 x 0.33 QFN 2.5 x 2.5 x 0.40 QFN 2.3 x 2.3 x 0.33 EVM (%) 1.5 1.8 1.8 1.8 Linear Pout (dBm) 17.5 17 18 18 Current at Po (mA) 210 180 245 245 Part Number RFFM8511 RFFM8515 RFFM8518 RFFM8528 NEW PRODUCTS PREVIEW Smart Energy AMI/ZigBee/ISM Front End Modules • • • • • • Integrated front end module (FEM) intended for ISM band systems ranging from 169MHz to 2.4GHz Targeting Smart Energy, AMI/AMR, Home Area Networks (HAN) and Mesh interoperable systems Variants provide separate ports for Rx and Tx paths LNA bypass Diversity antenna solutions Single-ended and differential solutions Freq. Range (Min) (MHz) 2400 902 902 902 430 902 Freq Range (Max) (MHz) 2500 928, 868 928, 868 928, 868 450 928, 868 Gain (dB) 12 14 31 13 25 27 Vcc (V) 2.0 to 4.0 3.6 5 3.6 2.5 to 4.5 3.6 Package 2.5 x 2.5 x 0.40 LGA 4.0 x 3.0 6.0 x 7.0 x 0.975 5.0 x 5.5 x 1.2 6.0 x 6.0 x 0.975 5.0 x 5.5 x 1.2 Linear Pout (dBm) 14 Current at Po (mA) 20 8 850 680 350 750 31 30.5 27.5 30 Part Number RFFM6205 RFFM6909 RFFM6905 RFFM6907 RFFM6404 RFFM6906 Switches (Packaged) • Versatility of operation over broad range of frequency bands • Excellent insertion loss and isolation performance • Primary path and diversity options Freq. Range (Min) (MHz) 5 5 5 150 10 Freq. Range (Max) (MHz) 6000 6000 6000 5000 6000 Switch Type SP3T SP4T SP6T SPDT SP3T Switching Speeds (ns) 2 2 2 100 25 Isolation (dB) 37 34 27 25 27 Insertion Loss (dB) 0.45 0.45 0.53 0.4 0.5 Vcc (V) 5 5 5 3 3 Package (mm) QFN, 1.8 x 1.8 QFN, 1.8 x 1.8 QFN, 2 x 2 QFN, 3 x 3 DFN, 2 x 2 Part Number RFSW6032 RFSW6042 RFSW6062 RFSW6023 RFSW6132 Programmable Array of Capacitors (PAC) • • • • 3 Wire SPI compatible control Programmable shunt switches on both RF ports for high isolation operation Wide tuning range 6-Bit, 64-state programmable array of capacitors Freq. Range (Min) (MHz) 500 Freq Range (Max) (MHz) 3000 Interface SPI Capacitance (Min) (pF) 0.46 Capacitance (Max) (pF) Quality Factor 13 35 VDD (V) 2.4 to 3.5 Package (mm) MCM, 2 x 2.5 Part Number RFAC3612 CATV 75Ω Push-Pull Amplifier ICs • Push-pull topology for excellent CSO • Excellent third order performance at low power dissipation • Positive gain slope available on some models Freq. Range (Min) (MHz) 5 Freq Range (Max) (MHz) 1200 Gain (dB) 16.5 NF (dB) 3 OP1dB (dBm) 24 OIP3 (dBm) 44 CTB* (dBc) -83 CSO* (dBC) -82 Vcc (V) 6 Icc (mA) 364 Package (mm) SOIC-8 Part Number RFCA8828 *79 channel, +34dBmV flat tilt 2014 • RFMD® New Products Guide 3 NEW PRODUCTS PREVIEW CATV 75Ω Single-Ended Linear Amplifiers • Excellent linearity • Low power consumption • Small footprint Freq. Range (Min) (MHz) 50 Freq Range (Max) (MHz) 1200 Gain (dB) 22 NF (dB) 1.54 OP1dB (dBm) 22.5 OIP3 (dBm) 39.2 Vcc (V) 6 Icc (mA) 178 Package (mm) SOT-89 Part Number RFCA3828 CATV Voltage-Controlled Attenuators • 3V and 5V versions available • High linearity suitable for CATV infrastructure applications • Linear in dB control characteristic Freq. Range (Min) (MHz) 50 Freq Range (Max) (MHz) 3000 Gain Control Range (dB) 35 Insertion Loss (Min) (dB) 1.5 CTB* (dBc) -75 CSO* (dBC) -80 Vcc (V) 5 Package (mm) QFN, 3 x 3 Part Number RFSA3043 *132 channel, +38dBmV input flat tilt CATV 75Ω DOCSIS 3.1 Products • 1200MHz operations • Extremely low distortion • Miniaturized MCM packages 4 Freq. Range (Min) (MHz) Freq Range (Max) (MHz) Gain (dB) NF (dB) Icc (mA) Package (mm) CTB (dBc) CSO (dBC) 40 1200 23 3 450 9x8 -80 -80 40 1200 25 3 450 9x8 -80 -80 40 1200 8 to 28 5 410 11 x 11 -67 -70 2014 • RFMD® New Products Guide Note For CTB & CSO Spec Vo=60dBmV at 1200MHz, 22dB extrapolated tilt, 79 analog channels plus 110 digital channels, -6dB offset Vo=60dBmV at 1200MHz, 22dB extrapolated tilt, 79 analog channels plus 110 digital channels, -6dB offset Vo=46dBmV, flat, 79 analog channels plus 75 digital channels, -6dB offset Part Number RFCM3316 RFCM3326 RFAM3790 To see RFMD’s complete list of products, visit www.rfmd.com/selectionguide RFMD SALES UNITED STATES ASIA RFMD Corporate Headquarters 7628 Thorndike Road Greensboro, NC, 27409-9421 Phone: 336.664.1233 RFMD (Beijing) Co. Ltd. Branch Company Unit 1606, NCI Tower A12 Jian Guo Men Wai Dajie Chaoyang District Beijing, China 100022 Phone: +86.10.6787.9977 EUROPE RFMD (UK) Ltd. 1015 Arlington Business Park Theale Berkshire RG7 4SA United Kingdom Phone: +44 (0) 118.916.7250 China Sales Office Room 108, South Tower No.2966 Jinke Road Zhangjiang High-tech Park Shanghai, China 201203 Phone: +86.21.3849.9988 Shenzhen Sales Office Room 01-02, 6/F, Tower 2 Kerry Plaza, No.1 Zhongxinsi Road Futian District Shenzhen, China 518048 Phone: +86.755.8832.2688 RFMD Taiwan BV 11F-B, No. 216, Sec.2, Tun-Hwa S. Road, Taipei 10669, Taiwan Phone: +886.2.2378.0930 RFMD Japan 1-1-7 Uchisaiwaicho NBF Hibiya Building RFMD Korea 10th Floor Haesung1 Bldg, 942, 14F Chiyoda-ku Tokyo, Japan 100-0011 Daechi-dong Kangnam-Ku, Phone: +81.3.3595.7530 Seoul Korea 135-725 Phone: +82.2.3454.0470 RFMD India No.5,R.T. Nagar Main Road Bangalore, India 560032 Phone: +91.80.4282.7200 For sales or technical support, contact your authorized local sales representative (see www.rfmd.com/globalsales). PSG.2014.19000