S8740240GT S8740240GT GaAs Push Pull Hybrid 40MHz to 870MHz Package: SOT-115J The S8740240GT is a Hybrid Push Pull amplifier module. The part employs GaAs die and is operated from 40MHz to 870MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. Features ■ Excellent Linearity ■ Superior Return Loss Performance ■ Extremely Low Distortion ■ Optimal Reliability ■ Low Noise ■ Unconditionally Stable Under All Terminations ■ 24.2dB Min. Gain at 870MHz ■ 240mA Max. at 24VDC Applications ■ 40MHz to 870MHz CATV Amplifier Systems Ordering Information S8740240GT Box with 50 Pieces Absolute Maximum Ratings Parameter Rating Unit RF Input Voltage (single tone) 75 dBmV DC Supply Over-Voltage (5 minutes) 30 V Storage Temperature -40 to +100 °C Operating Mounting Base Temperature -30 to +100 °C Caution! ESD sensitive device. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2011/65/EU. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. ® DS140226 ® RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 3 S8740240GT Nominal Operating Parameters Specification Parameter Unit Min Typ Condition Max V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω General Performance 23.2 23.5 23.8 dB f = 50MHz 24.2 24.7 25.2 dB f = 870MHz 0.7 1.2 1.7 dB f = 40MHz to 870MHz 1.0 dB f = 40MHz to 870MHz (peak to valley) 20.0 dB f = 40MHz to 160MHz 18.0 dB f = 160MHz to 870MHz 18.0 dB f = 40MHz to 320MHz 16.0 dB f = 320MHz to 870MHz f = 50MHz to 870MHz Power Gain [1] Slope Flatness of Frequency Response Input Return Loss Output Return Loss Noise Figure Total Current Consumption (DC) 4.6 6.5 dB 230.0 240.0 mA V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω Distortion Data 40MHz to 750MHz CTB -57 dBc XMOD -52 dBc CSO -58 dBc 112 ch. flat; VO = 44dBmV[2] 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 112 channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +44dBmV flat output level. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS140226 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 S8740240GT Package Drawing (Dimensions in millimeters) I U 123 5 7 89 C E J S P R M K O T Q øG N D 0 B 5 10mm scale H L F A Notes: European Projection Pinning: Pin Name 1 Input 2-3 GND 4 5 +VB 6 Nominal Min Max A 44,6 ± 0,2 44,4 44,8 B 13,6 ± 0,2 13,4 44,4 13,8 C 20,4 ± 0,5 19,9 20,9 D 8 ± 0,15 7,85 8,15 E 12,6 ± 0,15 12,45 12,75 F 38,1 ± 0,2 37,9 38,3 G 4 +0,2 / -0,05 3,95 4,2 H 4 ± 0,2 3,8 4,2 I 25,4 ± 0,2 25,2 25,6 J UNC 6-32 - - K 4,2 ± 0,2 4,0 4,4 L 27,2 ± 0,2 27,0 27,4 M 11,6 ± 0,5 11,1 12,1 N 5,8 ± 0,4 5,4 6,2 O 0,25 ± 0,02 0,23 0,27 P 0,45 ± 0,03 0,42 0,48 Q 2,54 ± 0,3 2,24 2,84 R 2,54 ± 0,5 2,04 3,04 S 2,54 ± 0,25 2,29 2,79 7-8 GND T 5,08 ± 0,25 4,83 5,33 9 Output U 5,08 ± 0,25 4,83 5,33 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS140226 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3