RFMD Datasheet Template

SGL-06SMT2
SGL-06SMT2
Low Noise Amplifier
5MHz to 4000MHz
RFMD’s SGL-06SMT2 is a low noise, high gain MMIC LNA
designed for low power, single supply operation from 2.7V to
3.6V. It’s Class-1C ESD protection ensures rugged
performance, while its integrated active bias circuit provides
stable gain over temperature. SGL-06SMT2 is internally
matched from 5MHz to 4000MHz and requires minimal
external components. The SGL-06SMT2 die is fabricated
using highly repeatable Silicon Germanium technology and is
packaged in a hermetic SMT2 package.
Package: SMT2, 4-pin, 11.42mm x
11.42mm x 4.32mm
Features
■
27dB Gain at 1.575GHz
■
1.4dB Noise Figure at 1.575GHz
■
Single 3.3V Supply Operation
■
Integrated Active Bias Circuit
■
Hermetic Package
■
MIL-STD-883 Screening
Applications
■
GPS Receivers
■
Military and Industrial
Functional Block Diagram
Ordering Information
SGL-06SMT2
.005GHz to 4GHz LNA, SMT-2 package
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS140306
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 5
SGL-06SMT2
Absolute Maximum Ratings
Parameter
Device Current (ID)
Device Voltage (VD)
Rating
Unit
30
mA
4
V
RF Input Power (See Note)
-10
dBm
Junction Temperature (TJ)
+150
W
Operating Temperature Range (TL)
-40 to +85
°C
Storage Temperature Range
-65 to +150
°C
ESD Rating - Human Body Model (HBM)
Class 1C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
*Note: Survival Rating. ZLOAD = 50Ω. Max recommended input power for continuous operation:
-20dBm.
Nominal Operating Parameters
Specification
Parameter
Unit
Condition
Min
Typ
Max
7.5
10.0
12.5
mA
32.0
35.0
38.0
dB
5MHz
24.0
27.0
30.0
dB
1.575GHz
14.0
17.0
20.0
dB
3.55GHz
Input Return Loss
-13.5
-9.5
dB
1.575GHz
Output Return Loss
-17.0
-9.5
dB
1.575GHz
dB
1.575GHz
dBm
1.575GHz
°C/W
Junction to Case
General Performance
Device Operating Current
Small Signal Gain
Output Power at 1dB Compression
3.3
5.5
Noise Figure
1.4
Thermal Resistance
173
1.9
Unit
10MHz
100MHz
450MHz
850MHz
1.575GHz
1.95GHz
2.44GHz
3.55GHz
Small Signal Gain
dB
35.0
34.9
33.7
31.5
27.0
25.3
22.7
17.0
Input Return Loss
dB
-11.2
-11.3
-11.8
-12.4
-13.5
-15.9
-23.5
-14.1
Output Return Loss
dB
-12.6
-12.8
-12.9
-14.1
-17.0
-15.9
-12.5
-10.0
Reverse Isolation
dB
-40.1
-40.0
-40.2
f
-39.0
-37.1
-35.0
-32.0
dBm
9.5
9.4
10.1
8.4
5.5
4.9
3.6
0.6
dB
1.1
1.0
1.0
1.1
1.4
1.6
-
-
Parameter
Output Power at 1dB
Compression
Noise Figure
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140306
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 5
SGL-06SMT2
Typical Performance: 50Ω Test Fixture with Bias Tees, VS = 3.3V, ID = 10.0mA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140306
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 5
SGL-06SMT2
Typical Performance: 100MHz to 4GHz Application Circuit, VS = 3.3V, ID = 10.0mA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140306
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 5
SGL-06SMT2
SMT2 Package Outline
Application Circuit Schematic 100MHz to 4GHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140306
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 5