规格书编号 SPEC NO : 产品 规 格书 SPECIFICATION CUSTOMER 客 户： PRODUCT 产 品： SAW FILTER MODEL NO 型 号： HD BF115A SIP5D PREPARED 编 制： CHECKED 审 核： APPROVED 批 准： D A T E 日 期： 2011-2-22 客户确认 CUSTOMER RECEIVED: 审核 CHECKED 批准 APPROVED 日期 DATE 无锡市好达电子有限公司 Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 1 of 7 SAW FILTER HD BF115A SIP5D 更改历史记录 History Record 更改日期 Date www.shoulder.cn 规格书编号 Spec. No. 产品型号 Part No. 客户产品型号 Customer No. Tel:0755-82916880 Fax:0755-82916881 更改内容描述 Modify Content E-mail:[email protected] 备注 Remark Page 2 of 7 SAW FILTER HD BF115A SIP5D 1.SCOPE SHOULDER’s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer’s name : SHOULDER ELECTRONICS Co. LTD(CHINA) Type : HD BF115A www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 3 of 7 SAW FILTER HD BF115A SIP5D 2.2. Circuit construction, measurement circuit 3.Characteristics Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15℃ to 35℃ Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -20℃ ~ +60℃ Storage temperature rang Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40℃ ~ +70℃ Specifications There shall be no damage. Reference +25℃ temperature 3.1 Maximum Rating DC voltage AC voltage www.shoulder.cn VDC Vpp 12 10 Tel:0755-82916880 Fax:0755-82916881 V V Between any terminals Between any terminals E-mail:[email protected] Page 4 of 7 SAW FILTER HD BF115A SIP5D 3.2 Electrical Characteristics Source impedance Zs=50Ω Load impedance ZL=50Ω Item Freq Center frequency Fo Insertion attenuation 115.24MHz Reference level 114.0~116.5 Amplitude(p-p) min - typ 115.24 21.0 22.5 Relative attenuation 24.0 0.6 MHz Pass bandwidth TA=25℃ max - dB dB B1.5dB B15dB B30dB - 2.9 3.9 4.4 - MHz MHz MHz 105.0~111.0 MHz 40.0 45.0 - dB 111.0~112.5 MHz 35.0 45.0 - dB 118.0~119.5 MHz 36 46.0 - dB 119.5~125.0 MHz 40 45 - dB 38.0 48.0 - dB Reflected wave signal suppression 1.5μs…6.0μs after main pulse (Test pulse 250 μ s, carrier frequency 115.24MHz) Group delay ripple(p-p) 113,79~116.69 Impedance at 36.00MHz Input: Zin =Rin //Cin Output: Zout=Rout//Cout 70 ns 0.2//16.0 0.1//23.4 KΩ//pF KΩ//pF Temperature coefficient -18 3.3 Environmental Performance Characteristics Item Condition High The specimen shall be store at a temperature of temperature 80±2℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Low The specimen shall be store at a temperature of temperature -20±3℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Humidity The specimen shall be store at a temperature of www.shoulder.cn MHz Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] ppm/k Specifications Mechanical characteristics and specifications in electrical characteristics shall Page 5 of 7 SAW FILTER Thermal shock Resistance to Soldering heat HD BF115A SIP5D 40±2℃ with relative humidity of 90% to 96% for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be subjected to 8 continuous cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 ℃=>-40 ℃ 0.5h 2 -40 ℃ 4h 3 -40 ℃=>+85 ℃ 2h 4 +85 ℃ 4h 5 +85 ℃=>+25 ℃ 0.5h 6 +25 ℃ 1h Reflow soldering method Peak: 255 ±5 ℃, 220 ±5 ℃, 40s At electrode temperature of the specimen. be satisfied. There shall be no excessive change in appearance. The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Solder ability Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of for 5 sec. total area of the pins should be covered with solder www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 6 of 7 SAW FILTER HD BF115A SIP5D 3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Pull with 1 kg force for 30 seconds Lead bend 90o bending with 500g weigh 2 times 3.5 Voltage Discharge Test Item Condition Surge Between any two electrode Specifications There shall be no damage. Specifications There shall be no damage 3.6 Frequency response www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 7 of 7