规格书编号 SPEC NO : 产品规格书 SPECIFICATION CUSTOMER 客 户： PRODUCT 产 品： SAW FILTER MODEL NO 型 号： HDQSF45A7Dc SIP5Dc PREPARED 编 制： CHECKED 审 核： APPROVED 批 准： D A T E 日 期： 2008-3-6 客户确认 CUSTOMER RECEIVED: 审核 CHECKED 批准 APPROVED 日期 DATE 无锡市好达电子有限公司 Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 1 of 11 SAW FILTER HDQSF45A7Dc SIP5Dc 更改内容描述 Modify Content 备注 Remark 更改历史记录 History Record 更改日期 Date www.shoulder.cn 规格书编号 Spec. No. 产品型号 Part No. 客户产品型号 Customer No. Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 2 of 11 SAW FILTER HDQSF45A7Dc SIP5Dc 1.SCOPE SHOULDER’s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer’s name : SHOULDER ELECTRONICS Co. LTD(CHINA) Type : QSF45A7Dc YY:year WW:week www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 3 of 11 SAW FILTER HDQSF45A7Dc SIP5Dc 3.Characteristics Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15℃ to 35℃ Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -10℃ ~ +60℃ Storage temperature rang Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40℃ ~ +70℃ Reference temperature +25℃ Specifications There shall be no damage. 3.1 Maximum Rating DC voltage AC voltage VDC Vpp 12 10 V V 3.2 Electrical Characteristics Characteristics of picture channel Source impedance Zs=50Ω Load impedance ZL=2kΩ//3pF Item Freq Insertion attenuation 44.06MHz Reference level 45.81MHz 42.23MHz Relative attenuation 41.31MHz 39.81MHz 47.31MHz 35.06~39.81MHz Sidelobe 47.31~55.06MHz www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 Between any terminals Between any terminals min typ TA=25℃ max 12.8 14.3 15.8 dB 5.1 -0.7 24.0 45.0 42.0 40.0 35.0 6.1 0.3 36.0 59.0 50.0 46.0 41.0 7.1 1.3 - dB dB dB dB dB dB dB E-mail:[email protected] Page 4 of 11 SAW FILTER HDQSF45A7Dc Reflected wave signal suppression 1.3 us … 6.0 us after main pulse (test pulse 250 ns , carrier frequency 44.06 MHz) Feedthrough signal suppression 1.3 us … 1.2 us before main pulse (test pulse 250 ns , carrier frequency 44.06 MHz) Group delay predistortion (reference frequency 45.81 MHz) 43.26MHz 42.23MHz Temperature coefficient Characteristics of sound channel Source impedance Zs=50Ω Load impedance ZL=2kΩ//3pF Freq Insertion attenuation 41.31MHz Reference level 42.23MHz 45.81MHz Relative attenuation 39.81MHz 47.31MHz 35.06~39.81MHz Sidelobe 47.31~55.06MHz Temperature coefficient 42.0 52.0 dB 56.0 dB www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 ns ns -40 0 -72 ppm/k TA=25℃ max min typ 9.9 11.4 12.9 23.0 38.0 35.0 40.0 35.0 34.0 32.0 45.0 41.0 43.0 40.0 39.0 -72 - 3.3 Environmental Performance Characteristics Item Condition High The specimen shall be store at a temperature of temperature 80±2℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Low The specimen shall be store at a temperature of temperature -20±3℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Humidity The specimen shall be store at a temperature of 40±2℃ with relative humidity of 90% to 96% for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which E-mail:[email protected] SIP5Dc dB dB dB dB dB dB dB ppm/K Specifications Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in Page 5 of 11 SAW FILTER Thermal shock Resistance to Soldering heat Solder ability www.shoulder.cn HDQSF45A7Dc SIP5Dc measurement shall be made within 1h. appearance. The specimen shall be subjected to 8 continuous cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 ℃=>-40 ℃ 0.5h 2 -40 ℃ 4h 3 -40 ℃=>+85 ℃ 2h 4 +85 ℃ 4h 5 +85 ℃=>+25 ℃ 0.5h 6 +25 ℃ 1h Reflow soldering method Peak: 255 ±5 ℃, 220 ±5 ℃, 40s At electrode temperature of the specimen. The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of for 5 sec. total area of the pins should be covered with solder Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 6 of 11 SAW FILTER HDQSF45A7Dc 3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Pull with 1 kg force for 30 seconds Lead bend 90o bending with 500g weigh 2 times SIP5Dc Specifications There shall be no damage. 3.5 Voltage Discharge Test Item Surge Condition Between any two electrode Specifications There shall be no damage www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 7 of 11 SAW FILTER HDQSF45A7Dc SIP5Dc 3.6 Frequency response Frequency response of picture channel www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 8 of 11 SAW FILTER www.shoulder.cn Tel:0755-82916880 HDQSF45A7Dc Fax:0755-82916881 E-mail:[email protected] SIP5Dc Page 9 of 11 SAW FILTER HDQSF45A7Dc SIP5Dc Frequency response of sound channel www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 10 of 11 SAW FILTER www.shoulder.cn Tel:0755-82916880 HDQSF45A7Dc Fax:0755-82916881 E-mail:[email protected] SIP5Dc Page 11 of 11