PLCC4 Surface Mount LED with Dome Lens OVSA1xBLCR8 Series High intensity with low power consumption PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.2 x 2.7 x 1.95 mm 60° viewing angle Product Photo Here The OVSA1xBLCR8 series is designed for focused, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications Traffic lights Signal and symbol luminaire Mono-color indicators Backlighting (LCD, switches, displays, illuminated advertising) Interior automotive lighting (instrumentation clusters) Safety marker lights (steps, exit ways) Amber Intensity Typ. mcd 5000 Water Clear Red 3700 Water Clear Part Number Material Emitted Color OVSA1ABLCR8 AlInGaP OVSA1SBLCR8 AllnGaP Lens Color DIMENSIONS ARE IN INCHES AND [ MM ] 5a RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 02/2014 Page 1 of 5 PLCC4 Surface Mount Dome LED OVSA1xBLCR8 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5V 70 mA Continuous Forward Current Peak Forward Current (Pulse width ≤10 msec, duty cycle ≤10%) 200 mA Power Dissipation 210 mW Thermal Resistance Junction to Solder 1. 150° C/W Electrostatic Discharge Classification (MIL-STD-883E) Class 2 LED Junction Temperature 110° C Lead Soldering Temperature 250° C / 10 seconds Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size≥16 mm2) Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER IV Luminous Intensity COLOR MIN TYP Red 2240 3700 Amber 3550 5000 MAX UNITS CONDITIONS mcd IF = 50 mA VF Forward Voltage ---- 2.5 3.0 V IF = 50 mA IR Reverse Current ---- ---- 10 µA VR = 5 V Red 618 624 630 Amber 584 591 599 nm IF = 50 mA deg IF = 50 mA λD 2Θ½H-H Dominant Wavelength 50% Power Angle 60 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 02/2014 Page 2 of 5 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Surface Mount Dome LED OVSA1xBLCR8 Series Standard Bins LEDs are sorted to luminous intensity (IV) and dominant wavelength (nm) bins listed below. Each reel consists of a single intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (IV ) @ 50mA Dominant Wavelength (nm) RED: OVSA1SBLCR8 RED: OVSA1SBLCR8 IV Code Min (mcd) Max (mcd) nm Code Min Max RA 618 630 Xb 2240 2800 Ya 2800 3550 Yb 3550 4500 Z0 4500 5600 AMBER: OVSA1ABLCR8 IV Code Min (mcd) AMBER: OVSA1ABLCR8 Max (mcd) nm Code Min Max Yb 3550 4500 A2 584 587 Z0 4500 5600 A3 587 590 A0 5600 7100 A4 590 593 B0 7100 9000 A5 593 596 A6 596 599 Reflow Solder Profile Solder = Lead-Free Average ramp-up rate = 4°C / sec. max Peak temperature = 250°C max. Preheat temperature: 150 - 220°C Preheat time: 120 sec. max. Ramp-down rate = 6°C / sec. max. Time within 5°C of actual peak temperature = 10 sec. max Duration above 217°C is 60 sec. max OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 02/2014 Page 3 of 5 PLCC4 Surface Mount Dome LED OVSA1xBLCR8 Series Typical Electro-Optical Characteristics Curves for OVSA1SBLCR8 (Red) & OVSA1ABLCR8 (Amber) Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Forward Current Relative Luminous Intensity vs. Wavelength Angular Distribution Red & Amber Maximum Forward DC Current vs. Ambient Red & Amber Reverse Current vs. Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 02/2014 Page 4 of 5 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Surface Mount Dome LED OVSA1xBLCR8 Series Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded Quantity 700 pieces per reel Moisture Resistant Packaging: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 02/2014 Page 5 of 5