White Surface Mount LED Lamp OVSRWAC1R6 x x x Side-view white LED Surface mount lead frame package with two pins Wide viewing angles Product Photo Here The OVSRWAC1R6 is ideal for backlighting LCD screens and for coupling with light guides. This design combines high optical efficiency with wide viewing angles (x = 120°, y = 110°) and low power consumption. Applications x LCD backlight x Hand-held appliances x Indicators x Switch and message illumination Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSRWAC1R6 GaN White 2000 Water Clear 3 DIMENSIONS ARE IN: RoHS [MILLIMETERS] INCHES Moisture GENERAL TOLERANCE: ± 0.1 PACKAGE: HEAT RESISTANT POLYMER LEAD FRAME: Cu ALLOY AND Ag PLATING DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.6 07/08 Page 1 of 8 White Surface Mount LED Lamp OVSRWAC1R6 Absolute Maximum Ratings TA = 25o C (on metal core PCB) unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -30 ~ +85° C Reverse Voltage 5V Continuous Forward Current 30 mA Forward Current Reduction -0.50 mA/° C Peak Forward Current (10% Duty Cycle, Pulse Width 10msec) 80 mA Power Dissipation 120 mW ESD Threshold (HBM) 2000V Electrical Characteristics TA = 25o C (on metal core PCB) unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 1860 2000 2210 mcd IF = 20 mA VF Forward Voltage 3.0 3.2 3.4 V IF = 20 mA IR Reverse Current ---- ---- 2.0 µA VR = 5 V 50% Power Angle ---- x=120° y=110° ---- deg IF = 20 mA ---- IF = 20 mA ---- IF = 20 mA 2 ½ x y Chromaticity Coordinates Ranking Table Applies (see Pages 3 and 5) Radiation Pattern Y X Relative Luminous Intensity Relative Luminous Intensity OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.6 07/08 Page 2 of 10 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com White Surface Mount LED Lamp OVSRWAC1R6 Standard Bins (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Luminous Intensity 2210 3 2140 2 2070 1 2000 W 1930 V 1860 CIE Chromaticity Diagram 0.28 0.27 L8 L7 0.26 L6 Y L5 0.25 L4 L3 0.24 L2 M2 M4 M3 M5 M6 M7 M8 N8 N7 N6 N5 N4 N3 N2 0.23 0.22 0.26 0.27 0.28 0.29 X Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. Chromaticity coordinates measurement allowance ± 0.005. 5. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.6 07/08 Page 3 of 8 White Surface Mount LED Lamp OVSRWAC1R6 Standard Bins (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Chromaticity Coordinates Rank Chromaticity Coordinates L2 y 0.2361 0.2350 0.2397 0.2408 0.2408 0.2397 0.2444 0.2455 0.2455 0.2444 0.2491 0.2502 x 0.2770 0.2791 0.2817 0.2796 0.2796 0.2817 0.2843 0.2822 0.2822 0.2843 0.2869 0.2848 y 0.2502 0.2491 0.2538 0.2550 0.2550 0.2538 0.2586 0.2597 0.2597 0.2586 0.2633 0.2644 L5 L6 Rank Chromaticity Coordinates Rank Chromaticity Coordinates L8 x 0.2848 0.2869 0.2895 0.2874 y 0.2644 0.2633 0.2680 0.2691 M2 M3 y 0.2350 0.2338 0.2385 0.2397 0.2397 0.2385 0.2433 0.2444 0.2444 0.2433 0.2480 0.2491 x 0.2791 0.2813 0.2838 0.2817 0.2817 0.2838 0.2864 0.2843 0.2843 0.2864 0.2889 0.2869 y 0.2491 0.2480 0.2527 0.2538 0.2538 0.2527 0.2575 0.2586 0.2586 0.2575 0.2622 0.2633 M5 M6 Chromaticity Coordinates Rank M7 M8 x 0.2869 0.2889 0.2915 0.2895 y 0.2633 0.2622 0.2670 0.2680 N2 N3 N4 x 0.2736 0.2757 0.2782 0.2761 0.2761 0.2782 0.2807 0.2787 0.2787 0.2807 0.2833 0.2813 y 0.2338 0.2327 0.2374 0.2385 0.2385 0.2374 0.2422 0.2433 0.2433 0.2422 0.2470 0.2480 x 0.2813 0.2833 0.2858 0.2838 0.2838 0.2858 0.2883 0.2864 0.2864 0.2883 0.2908 0.2889 y 0.2480 0.2470 0.2517 0.2527 0.2527 0.2517 0.2565 0.2575 0.2575 0.2565 0.2612 0.2622 Rank Chromaticity Coordinates M4 0.2713 0.2736 0.2761 0.2739 0.2739 0.2761 0.2787 0.2766 0.2765 0.2787 0.2813 0.2791 Rank Chromaticity Coordinates L7 x Rank Chromaticity Coordinates L4 0.2692 0.2713 0.2739 0.2718 0.2718 0.2739 0.2765 0.2744 0.2744 0.2765 0.2791 0.2770 Rank Chromaticity Coordinates L3 x N5 N6 Rank Chromaticity Coordinates N7 N8 x 0.2889 0.2908 0.2933 0.2915 y 0.2622 0.2612 0.2660 0.2670 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. Chromaticity coordinates measurement allowance ± 0.005. 5. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.6 07/08 Page 4 of 10 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com White Surface Mount LED Lamp OVSRWAC1R6 Series Typical Electro-Optical Characteristics Curves mA 100 1000 50 500 30 300 10 % 100 5 50 3 30 1 3.0 2.5 3.5 V 4.0 10 4.5 3 1 Forward Current vs Forward Voltage 10 mA 5 50 30 100 Relative Luminous Intensity vs Forward Current 1000 0.35 500 0.30 300 y 100 0.25 50 0.20 30 10 -40 -20 0 20 40 °C 60 80 0.15 0.15 100 Relative Luminous Intensity vs Ambient Temperature 0.25 0.20 x 0.30 0.35 Chromaticity vs Forward Current 100 80 60 % 40 20 0 350 400 450 500 550 600 650 700 750 800 nm Relative Emission Intensity OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.6 07/08 Page 5 of 8 White Surface Mount LED Lamp OVSRWAC1R6 Packing Information: 7-inch reel Carrier Tape Dimensions: Loaded quantity 3000 pieces per reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.6 07/08 Page 6 of 10 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com White Surface Mount LED Lamp OVSRWAC1R6 Moisture Resistant Reel Packaging Label Aluminum Moisture-proof Bag Recommended Soldering Pattern Bar Code Label (Unit: mm) 1.0 1.4 0.9 1.4 Desiccant OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.6 07/08 Page 7 of 8 White Surface Mount LED Lamp OVSRWAC1R6 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.6 07/08 Page 8 of 10 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com