Fiber Optic Receiver OPF500 Series OPF500 Series • • • • • Interfaces with all logic circuits Two output options Optimized for fiber optic applications using 50 to 200 micron fibers Data rate to 200kbps NRZ Available with multiple packaging options The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul fiber optic systems using 850 nm LEDs such as Optek’s OPF300 series. These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation with supply voltages ranging from 4.5V to 16V. Applications ♦ ♦ ♦ ♦ Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems Part Ordering Information Part Number Description OPF500 Buffer, 10kW Pull-Up Plastic Cap Component OPF505 Buffer, 10kW Pull-Up Metal Can Component OPF507 Buffer, 10kW Pull-Up Metal ST Receptacle OPF510 Inverter, 10kW Pull-Up Plastic Cap Component OPF512 Inverter, 10kW Pull-Up Metal ST Receptacle This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com Issue A 05/2013 Page 1 of 5 Fiber Optic Receiver OPF500 Series Absolute Maximum Ratings Storage Temperature -65° C to +100° C Operating Temperature -40° C to +85° C Lead Soldering Temperature (for 10 seconds) 260° C Supply Voltage 18 V Sinking Current 16 mA Power Dissipation 200 mW Open Collector Power Distribution 40mW Voltage at Output 30 V Electrical/Optical Characteristics 4.5 V ≤ VCC ≤ 16.0 V, TA = 25°C — unless otherwise specified SYMBOL PARAMETER VCC Supply Voltage VOH High Level Output Voltage VOL Low Level Output Voltage ICC Supply Current PIN MIN TYP 4.5 MAX UNITS 16.0 V CONDITIONS V Buffer: PIN > 2.0 µW Inverter: PIN < 0.1 µW 0.4 V Buffer: PIN < 0.1 µW Inverter: PIN > 2.0 µW 12.0 mA No output load Input Sensitivity 2.0 µW λp = 850 nm Rise Time 300 100 ns Buffer Inverter tf Fall Time 300 100 ns Inverter Buffer BW Bandwidth tr PWD Pulse Width Distortion RoHS Issue A 05/2013 Page 2 of 5 VCC - 1.5 5.0 100 kHz ±10 % PIN = 1.5 µW (peak) VCC = 5.0 V PIN > 2.0 µW, 50% duty cycle 1 µW < PIN < 100 µW, f = 20 kHz 50% duty cycle OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com Fiber Optic Receiver OPF500 Series Mechanical Outline — OPF500, OPF510 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com Issue A 05/2013 Page 3 of 5 Fiber Optic Receiver OPF500 Series Mechanical Outline — OPF505 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 05/2013 Page 4 of 5 OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com Fiber Optic Receiver OPF500 Series Mechanical Outline — OPF507, OPF512 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 [email protected] www.optekinc.com Issue A 05/2013 Page 5 of 5