Sensing and Control OPA733 Series 1 Watt Light Spot on OptoTherm Linear Heat Spreader Features: • 1 waƩ LED on round substrateFeature 1 • Mono-color per strip (Blue, Green, Red, Yellow, White) • Universal connector (Tyco 2-292173-2 mates with 173977-2) • RoHS Compliant OPA733_ (120° Beam Angle) DescripƟon: The OPA733 Series are designed for areas where lighƟng intensity and reliability are essenƟal. The light beam angle of 120° is ideal for illuminaƟng medium size areas while requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipaƟon of any light assembly in the industry. For custom colors and design contact your OPTEK representaƟve. Electrical / OpƟcal CharacterisƟcs: TA=25°C, IF=350mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA733Y 2.5 OPA733B Beam Angle Color Dominant Wavelength 26 Yellow 587 nm 3.6 9 Blue 470 nm OPA733G 3.6 48 Green 530 nm OPA733R 2.5 35 Red 625 nm OPA733W 3.6 48 White 6,500°K 120° + Voltage Ground OPA733_ See OVSP_BCR4 for component specificaƟons RoHS General Note TT Electronics reserves the right to make changes in product specificaƟon without noƟce or liability. All informaƟon is subject to TT Electronics’ own data and is considered accurate at Ɵme of going to print. © TT electronics plc DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.Ʃelectronics.com Issue B 09/2015 Page 1