Data Sheet

Sensing and Control
OPA731 Series
20 Watt Light Flood on
OptoTherm Linear Heat Spreader
OPA731_ (120° Beam Angle)
Features:
• 20, 1 waƩ LEDs per square substrate
• Mono-color per strip (Blue, Green, Red, Yellow, White)
• Universal connector (Tyco 2-292173-2 mates with 173977-2)
• RoHS Compliant
DescripƟon:
The OPA731 Series are designed for areas where lighƟng intensity and reliability are essenƟal. The light beam angle of 120º
is ideal for illuminaƟng medium size areas while requiring minimal space. A High Performance Heat Spreader (HPHS) is used
to ensure the best heat dissipaƟon of any light assembly in the industry.
OptoTherm is designed to be the opƟmum material for distribuƟon of heat for high power devices.
For custom colors and design contact your OPTEK representaƟve.
Electrical / OpƟcal CharacterisƟcs: TA=25°C, IF=1.4A
Part Number
Typical Forward Voltage (V)
Luminous Flux (lm)
OPA731Y
12.5
OPA731B
Color
Dominant Wavelength
700
Yellow
587 nm
18.0
180
Blue
470 nm
OPA731G
18.0
960
Green
530 nm
OPA731R
12.5
520
Red
625 nm
OPA731W
18.0
960
White
6,500°K
RoHS
General Note
TT Electronics reserves the right to make changes in product specificaƟon
without noƟce or liability. All informaƟon is subject to TT Electronics’ own data
and is considered accurate at Ɵme of going to print.
© TT electronics plc
Beam Angle
120°
DO NOT LOOK DIRECTLY AT LED
WITH UNSHIELDED EYES OR
DAMAGE TO RETINA MAY
OCCUR.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.Ʃelectronics.com
Issue B
09/2015
Page 1