Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Features: • • • • Phototransistor output High sensitivity Low-cost plastic housing Available with lenses for dust protection and ambient light filtration • Focused for maximum sensitivity WZ Version Description: The OPB703, OPB704 and OPB705 consist of an Infrared (890nm) Light Emitting Diode (LED) and a NPN silicon Phototransistor, mounted side-by-side on converging optical axes in a black plastic housing and are designed for PCBoard mounting. The OPB703WZ, OPB704WZ, OPB705WZ and OPB70BWZ are designed for remote mounting utilizing interconnect wires of UL approved 26 AWG, 24” (61.0cm) minimum length, stripped and tinned. The OPB70AWZ consists of an Infrared (890nm) Light Emitting Diode (LED) and a NPN silicon Photodarlington, mounted side-by-side on converging optical axes in a black plastic housing and is designed for remote mounting utilizing interconnect wires of UL approved 26 AWG, 24” (61.0cm) minimum length, stripped and tinned. The OPB70CWZ through OPB70FWZ consist of a Visible (Red 640nm) Light Emitting Diode (LED) and a NPN silicon Phototransistor or Rbe Phototransistor, mounted side-by-side on converging optical axes in a black plastic housing and are designed for remote mounting utilizing interconnect wires of UL approved 26 AWG, 24” (61.0cm) minimum length, stripped and tinned. Various lens options are available: No lens for the (OPB703, OPB703WZ), blue window for dust protection for the (OPB704, OPB704WZ, OPB70BWZ) and aperture lens for improved resolution for the (OPB705, OPB705WZ, OPB70AWZ, OPB70CWZ, OPB70DWZ and OPB70HWZ). The OPB704G and OPB704GWZ offers excellent protection for dirty environments. The phototransistor responds to illumination from the emitter when a reflective object passes within the field of view centered typically at 0.15” (3.8 mm). Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: • Non-contact reflective object sensor • Assembly line automation • Machine automation • Machine safety • End of travel sensor • Door sensor • Mark Detection • Office Equipment • Gaming Equipment Part LED Peak Detector OPB703 None Lead or Wire 0.160" Leads OPB703WZ 24" / 26 AWG Wire OPB704 0.160" Leads 24" / 26 AWG Wire OPB704WZ Transistor OPB70HWZ OPB704G Blue Window 890 nm 24” / 26 AWG Wire 0.160" Leads OPB704GWZ 24" / 26 AWG Wire OPB705 0.160" Leads Aperture OPB705WZ OPB70AWZ Darlington OPB70BWZ Rbe Transistor OPB70CWZ Rbe Transistor OPB70DWZ RoHS Optical Cover 640 nm Transistor OPB70EWZ Rbe Transistor OPB70FWZ Transistor Blue Window Aperture 24" / 26 AWG Wire Clear Window OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 03/2012 Page 1 of 9 Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ OPB703, OPB704, OPB705 OPB703 OPB704 OPB705 OPB703, OPB704, OPB705 1 4 2 3 OPB703WZ, OPB704WZ, OPB705WZ, OPB70AWZ, OPB70BWZ, OPB70CWZ, OPB70DWZ OPB703WZ OPB704WZ OPB70BWZ OPB70EWZ OPB70FWZ OPB70HWZ OPB703WZ, OPB704WZ, OPB705WZ, OPB70DWZ OPB70HWZ Anode Collector Cathode Emitter OPB705WZ OPB70AWZ OPB70CWZ OPB70DWZ OPB70BWZ, OPB70CWZ OPB70EWZ Anode Cathode OPB70AWZ Anode Collector Emitter Cathode Collector Emitter OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 03/2012 Page 2 of 9 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ OPB704G OPB704GWZ OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 03/2012 Page 3 of 9 Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage Temperature Range -40°C to +80° C 240° C(1) Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 sec. with soldering iron] Input Diode Forward DC Current 40 mA Reverse DC Voltage 2V 100 mW(2) Power Dissipation Output Photodetector Collector-Emitter Voltage Phototransistor Photodarlington 30 V 15 V Emitter-Collector Voltage 5V Collector DC Current 25 mA 100 mW(2) Power Dissipation Electrical Characteristics (TA = 25° C unless otherwise noted) (OPB703, OPB703WZ, OPB704, OPB704WZ, OPB705, OPB705WZ, OPB704G, OPB704GWZ, OPB70HWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for additional information — for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP505 for additional information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V ICE = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IEC = 100µA Collector Dark Current - - 250 nA VCE = 10 V, IF = 0, EE =0 0.60 0.30 0.20 0.15 - 3.5 2.5 2.5 1.0 0.50 - 6.0 - - 20 20 10 ICEO Coupled IC(ON) On-State Collector Current OPB70HWZ OPB703, OPB703WZ OPB704, OPB704WZ OPB705, OPB705WZ OPB704G, OPB704GWZ ICX Crosstalk OPB703, OPB703WZ OPB704, OPB704WZ, OPB70HWZ OPB705, OPB705WZ mA VCE = 5 V, IF = 40mA , d = 0.15” (3)(7) VCE = 5 V, IF = 40mA , d = 0.20” (3)(6) µA VCE = 5 V, IF = 40mA(6) Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) For OPB703, OPB704 and OPB705, derate linearly 1.67 mW/° C above 25° C. (3) For OPB703WZ, OPB704WZ, OPB705WZ, OPB70BWZ, OPB704G, OPB704GWZ and OPB70HWZ derate linearly 1.82 mW/° C above 25° C. (4) The distance from the assembly face to the reflective surface is d. (5) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflecting surface. (6) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 03/2012 Page 4 of 9 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Electrical Characteristics (TA = 25° C unless otherwise noted) (OPB70AWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for additional information — for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 µA VR = 2 V Output PhotoDarlington (See OP535 for additional information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 15 - - V ICE = 1.0 mA, EE =0 V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IEC = 100µA, EE =0 Collector Dark Current - - 250 nA VCE = 10 V, IF = 0, EE =0 5.0 - 26.0 mA VCE = 5 V, IF = 40mA , d = 0.15” (2)(5) ICEO Coupled IC(ON) On-State Collector Current V(SAT) Saturation Voltage - - 1.15 V IC = 400 µA, IF = 40mA , d = 0.15” (2)(5) Crosstalk - - 25 µA VCE = 5 V, IF = 40mA(4) ICX Notes: (1) (2) (3) (4) (5) (6) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 1.82 mW/° C above 25° C. The distance from the assembly face to the reflective surface is d. Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflecting surface. Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. All parameters tested using pulse techniques. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 03/2012 Page 5 of 9 Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Electrical Characteristics (TA = 25° C unless otherwise noted) (OPB70BWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for additional information — for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP705 for additional information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V ICE = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 0.4 - - V IEC = 100µA - - 100 nA VCE = 10 V, IF = 0, EE =0 0.50 - 3.0 mA VCE = 5 V, IF = 40mA , d = 0.15” (3)(6) - - 5 µA VCE = 5 V, IF = 40mA(5) ICEO Collector Dark Current Coupled IC(ON) ICX Notes: (1) (2) (3) (4) (5) (6) (7) On-State Collector Current OPB70BWZ Crosstalk OPB70BWZ RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. For OPB703, OPB704 and OPB705, derate linearly 1.67 mW/° C above 25° C. For OPB703WZ, OPB704WZ, OPB705WZ and OPB70BWZ, derate linearly 1.82 mW/° C above 25° C. The distance from the assembly face to the reflective surface is d. Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflecting surface. Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. All parameters tested using pulse techniques. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 03/2012 Page 6 of 9 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Electrical Characteristics (TA = 25° C unless otherwise noted) (OPB70CWZ and OPB70EWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OVLAS6CB8 for additional information — for reference only) VF Forward Voltage - - 2.6 V IF = 40mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP505 for additional information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V ICE = 100µA, IF = 0, EE =0 V(BR)ECO Emitter-Collector Breakdown Voltage 0.4 - - V IEC = 100µA, IF = 0, EE =0 - - 100 nA VCE = 10 V, IF = 0, EE =0 .10 - 1.0 mA .25 - 2.5 VCE = 5 V, IF = 40mA , d = 0.15” (2)(5) ICEO Collector Dark Current Coupled OPB70CWZ IC(ON) On-State Collector Current V(SAT) Saturation Voltage - - 0.4 V IC = 100 µA, IF = 40mA , d = 0.15” (2)(5) Crosstalk - - 2 µA VCE = 5 V, IF = 40mA(4) ICX Notes: (1) (2) (3) (4) (5) (6) (7) OPB70EWZ RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. For OPB703WZ, OPB704WZ, OPB705WZ and OPB70BWZ, derate linearly 1.82 mW/° C above 25° C. The distance from the assembly face to the reflective surface is d. Lower curve is based on a calculated worst-case condition, rather than the conventional -2Ω limit. Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflecting surface. Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. All parameters tested using pulse techniques. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 03/2012 Page 7 of 9 Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ Electrical Characteristics (TA = 25° C unless otherwise noted) (OPB70DWZ and OPB70FWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OVLAS6CB8 for additional information — for reference only) VF Forward Voltage - - 2.6 V IF = 40mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP505 for additional information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V ICE = 100µA, IF = 0, EE =0 V(BR)ECO Emitter-Collector Breakdown Voltage 5.0 - - V IEC = 100µA, IF = 0, EE =0 - - 250 nA VCE = 10 V, IF = 0, EE =0 .10 - 1.5 mA .25 - 3.5 VCE = 5 V, IF = 40mA , d = 0.15” (2)(5) ICEO Collector Dark Current Coupled OPB70DWZ IC(ON) On-State Collector Current V(SAT) Saturation Voltage - - 0.4 V IC(ON) = 100 µA, IF = 40mA , d = 0.15” (2)(5) Crosstalk - - 5.0 µA VCE = 5 V, IF = 40mA(4) ICX Notes: (1) (2) (3) (4) (5) (6) OPB70FWZ RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. For OPB703WZ, OPB704WZ, OPB705WZ and OPB70BWZ, derate linearly 1.82 mW/° C above 25° C. The distance from the assembly face to the reflective surface is d. Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflecting surface. Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E 152 7795. All parameters tested using pulse techniques. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 03/2012 Page 8 of 9 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB703 through OPB705, OPB703WZ through OPB705WZ, OPB70AWZ through OPB70HWZ OPB703—Output Distance OPB703 - Output vs Distance OPB704, OPB70B, OPB70H—Output Distance OPB704 - Output vs Distance 1.8 1.8 Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% 1.6 1.6 1.4 1.4 Normalized Output 1.2 Normalized Output Kodak 90% Kodak 19% Avery Corporate Retro Reflective 1.0 0.8 Kodak 90% Kodak 19% Copier Paper Avery Label Retro Reflective 1.2 1.0 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.0 1.0 0.1 0.2 0.3 Distance (inches) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Distance (inches) OPB705, OPB70A,OPB705 OPB70C, OPB70D—Output - Output vs Distance Distance LED Forward Voltage vs Forward Current vs Temp 1.6 1.8 Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% Normalized Forward Current at 20 mA and 20° C 1.6 1.4 Kodak 90% Kodak 19% Copier Paper Avery Labels Retro Reflective 1.2 1.0 Typical Forward Voltage Normalized Output 1.4 0.8 0.6 1.2 1.0 -40° C -20° C 0° C 0.4 20° C 0.8 40° C 60° C 0.2 80° C 0.6 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 5 10 Distance (inches) 15 20 25 30 35 40 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 03/2012 Page 9 of 9