Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series OPB708, OPB709, OPB740, OPB745 Series Features: • • • • • Focused for maximum sensitivity Phototransistor or photodarlington output Crosstalk does not exceed specified ICEO 24” (610 mm) wire length 26 AWG wire size Product Photo Here OPB7_ _WZ Series Description: Each reflective object sensor in the OPB708, OPB709, OPB740 through OPB746 and OPB740WZ through OPB746WZ series consists of an infrared emitting diode and a NPN silicon phototransistor or a photodarlington. The OPB747WZ and OPB748WZ consist of a Red visible LED and a low light level rejection (RBE) NPN silicon phototransistor. The Red LED allows better contrast ratio when detecting Black marks on a White surface. All these devices are mounted side-by-side on converging optical axes in a black plastic housing focusing on a small area and depth of field. OPB7 _ _ WZ series are wired (UL approved wire) devices that offer various lens options, including no windows, blue polysulfone windows for dust protection or opaque aperture windows with offset openings for improved target resolution. On each sensor included in this data sheet, the photosensor responds to radiation only when a reflective object passes within its field of view. Custom IC(ON) current binning, special wire lengths and connectorization is available through your OPTEK rep. Applications: • Non-contact reflective object • Assembly line automation • Machine automation • Machine safety • End of travel sensor • Door sensor • Thermal Paper Mark sensor Part Number OPB708 OPB709 LED Peak Wavelength 935 nm Reflection Distance Inch (mm) Sensor Lead Length/ Wire Type Transistor Darlington OPB740 OPB741 0.150" Minimum Transistor OPB742 OPB743 OPB744 OPB745 OPB740WZ 890 nm Darlington OPB741WZ CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. Applies to: OPB460, OPB470, OPB480, OPB490. Transistor OPB742WZ OPB743WZ 24" / 26 AWG Wire OPB744WZ OPB745WZ OPB746WZ OPB747WZ OPB748WZ RoHS Min=0.08” [2.04mm] Typ=0.15" [3.81mm] Max=0.30” [7.62mm] Darlington 935 nm 645nm RBE Transistor Transistor OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 10/11 Page 1 of 6 Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series OPB708, OPB709, OPB740, OPB741, OPB742, OPB743, OPB744, OPB745 [ MILLIMETERS] DIMENSIONS ARE IN: INCHES OPB740WZ, OPB741WZ, OPB742WZ, OPB743WZ, OPB744WZ, OPB745WZ, OPB740W24Z, OPB741W24Z, OPB742W24Z, OPB743W24Z, OPB744W24Z, OPB745WZ, OPB746WZ, OPB747WZ, OPB708 OPB740 thru OPB744 OPB709, OPB745, Color-PIN # LED Color-PIN # Transistor Orange-1 Anode White-4 Collector Green-2 Cathode Blue-3 Emitter Package Style Part Number Lens Configuration OPB708 D - No windows OPB709 D - No windows OPB740 A - No windows OPB740WZ A - No windows OPB741 B - Blue windows OPB741WZ B - Blue windows OPB742 C - Offset windows OPB742WZ C - Offset windows OPB743 A - No windows OPB743WZ A - No windows OPB744 B - Blue windows OPB744WZ B - Blue windows OPB745 C - Offset windows OPB745WZ C - Offset windows OPB746WZ B - Blue windows OPB747WZ C - Offset windows OPB748WZ C - Offset windows OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 10/11 Page 2 of 6 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series Absolute Maximum Ratings (TA=25°C unless otherwise noted) Operating and Storage Temperature Range OPB708, OP709, OPB740, OPB741, OPB742, OPB743, OPB744, OPB745 -40° C to +85° C OPB741WZ, OPB742WZ, OPB743WZ, OPB744WZ, OPB745WZOPB746WZ, OPB747WZ, OPB748WZ -40° C to +80° C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1) 260°C Input Diode (see OP165 (935 nm), OP265 (890 nm) or OVLAS6CB8 (645 nm) for additional information) Forward DC Current 40 mA Reverse DC Voltage 2V Power Dissipation (2) 100 mW Sensor Output (See OP505 (Transistor), OP705 (RBE Transistor) or OP535 (Darlington) for additional Information Collector-Emitter Voltage OPB708 OPB709 OPB740, OPB741, OPB742, OPB743, OPB744 OPB740WZ, OPB741WZ, OPB742WZ, OPB743WZ, OPB744WZ OPB748WZ OPB745 OPB745WZ OPB746WZ, OPB747WZ 30 V 15 V 30 V 30 V 15 V 15 V 24 V Emitter-Collector Voltage OPB708 through OPB745, OPB748 OPB746 through OPB747 5.0 V 0.4 V Power Dissipation(2) 100 mW Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 2. Derate linearly 1.33 mW° C above 25° C. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 645 nm LED (See OVLAS6CB8 for generic information — for reference only) VF Forward Voltage - - 2.6 V IF = 20 mA IR Reverse Current - - 100 µA VR = 2 V 890 nm LED (See OP265 for additional information — for reference only) VF Forward Voltage - - 1.8 V IF = 40 mA IR Reverse Current - - 100 µA VR = 2 V 935 nm LED (See OP165 for additional information — for reference only) VF Forward Voltage - - 1.7 V IF = 40 mA IR Reverse Current - - 100 µA VR = 2 V OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 10/11 Page 3 of 6 Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output RBE Phototransistor (See OP705 for general information — for reference only) V(BR)CEO ICEO Collector-Emitter Breakdown Voltage Collector Dark Current 24 - - V IC = 100 µA - - 100 nA VCE = 10 V, IF = 0, EE =0 Output Phototransistor (See OP505 for general information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA Collector Dark Current - - 100 nA VCE = 10 V, IF = 0, EE =0 ICEO Output Photodarlington (See OP535 for general information — for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 15 - - V IC = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA Collector-Emitter Dark Current OPB709, OPB745, OPB745WZ - - 25 µA VCE = 5 V, IF = 0, EE =0 VCE(SAT) Saturation Voltage OPB708 OPB709 - - 0.40 1.10 V IF = 40 mA, Ic = 3 µA , d = 0.15”(1)(2) IC(ON)(1)(2) On-State Collector Current OPB708 OPB709 OPB740, OPB740WZ OPB741, OPB741W Z OPB742, OPB742WZ OPB743, OPB743WZ OPB744, OPB744WZ OPB745, OPB745WZ OPB746WZ OPB747WZ OPB748WZ 0.01 1.00 0.05 0.05 0.01 0.20 0.20 5.00 0.50 0.01 0.01 - 3.00 2.50 2.50 0.70 2.00 2.00 26.0 2.50 0.70 0.70 - - 10.0 10.0 1.0 20.0 20.0 25.0 1.0 1.0 1.0 ICEO Coupled ICX(3) Crosstalk OPB708, OPB709, OPB740, OPB740WZ OPB741, OPB741WZ OPB742, OPB742WZ OPB743, OPB743WZ OPB744, OPB744WZ OPB745, OPB745WZ OPB746WZ OPB747WZ OPB748WZ mA VCE = 5 V, IF = 40mA , d = 0.15” (3.810 mm) µA VCC = 5 V, IF = 40mA Notes: 1. The distance from the assembly face to the reflective surface is “d”. 2. Reflective surface is Eastman Kodak (Catalog #190 3061) neutral white test card with 90% diffuse reflectance as a reflecting surface. 3. Crosstalk is the photocurrent measured with current to the input diode, no reflective surface and no ambient light (EE = 0). OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 10/11 Page 4 of 6 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series LED Forward Voltage vs Forward Current vs Temperature Transistor Outputvsvs Distance OPB708 - Output Distance 1.50 1.40 Normalized at 0.150" Kodak 90% 1.40 Kodak 90% Kodak 19% Copier Paper Avery Label Retro Material 1.00 Typical Forward Voltage Normalized Output (volts) 1.20 0.80 0.60 0.40 1.30 1.20 -40° C 1.10 -20° C 0° C 20° C 40° C 1.00 0.20 60° C 80° C 0.90 0.00 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0 1.00 5 10 Distance (inches) 15 20 25 30 35 40 Forw ard Current (m A) Transistor Output vs Forward Current OPB708 - Output vs Forward Current vs Temp vs Temperature 2.50 Normalized Collector Current at 20mA and 20°C -40° C -20° C 0° C 20° C 40° C 60° C 80° C Normalized Output 2.00 1.50 1.00 0.50 0.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 10/11 Page 5 of 6 Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series LED Forward Voltage vs Forward Current vs Temperature Darlington vsDistance Distance OPB709 -Output Output vs 1.40 1.50 Normalized at 0.150" Kodak 90% 1.40 Kodak 90% Kodak 19% Copier Paper Avery Label Retro Material 1.00 Typical Forward Voltage Normalized Output (volts) 1.20 0.80 0.60 0.40 1.30 1.20 -40° C 1.10 -20° C 0° C 20° C 40° C 1.00 0.20 60° C 80° C 0.00 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 0.90 0 5 10 Distance (inches) 15 20 25 30 35 40 Forw ard Current (m A) Darlington Output vs Forward Current OPB709 - Output vs Forward Current vs Temp vs Temperature 2.50 Normalized Collector Current at 20mA and 20°C -40° C -20° C 0° C 20° C 40° C 60° C 80° C Normalized Output 2.00 1.50 1.00 0.50 0.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 10/11 Page 6 of 6 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com