Tape & Reel Packaging For Surface Mount Devices A utomation of surface-mount assembly by the use of pick-and-place equipment to handle tiny components has been enhanced by evolutionary improvements in tape-and-reel systems which can accommodate as many as 4000 parts on a 13-inch reel. This results in less frequent component reloading and less downtime of the assembly equipment. Other advantages of tape feeders include versatility or the ability to handle a variety of parts. Mini-Circuits has kept pace with the trend towards automated assembly and offers RF/Microwave signal-processing components in tape-and-reel format, in accordance with the specifications in the following tables. However, there are many situations where requirements are for smaller quantities. In these cases, Mini-Circuits offers small quantity reels of 20, 50,100, 200 and 500 pcs for selected models. There is no extra charge and these reels are ready for placement on pick and place systems. ESD Protection: Date Code Marking: Mini-Circuits maintains device date code control per our ISO9001 and AS9100 documented procedures, in accordance with MIL-PRF-19500. Product is verified based on the following: Model Type Connector Period 5 years Surface Mount 3 years Test Electrical Performance Electrical Performance Solderability Sampling AQL AQL per lot size Criteria 100% pass 100% pass J-STD After these expiration periods subsequent retest is required for 1 year extension. Acceptance date and approval shall appear on the package label. The device markings are for production lot control and identification. The date code marked on the reel or other package label is the date code for the parts contained therein. Mini-Circuits’ product warranty, as governed by our Terms and Conditions, starts at the date of shipment and is independent of reel label or device marking. Mini-Circuits uses industry recognized materials to ensure that all products are protected from ESD (Electro-Static Discharge) damage during handling and shipping. Carrier tapes meet or exceed requirements defined in EIA-481 and EIA-541 and are static dissipative. Properties Method Performance Surface Resistivity ASTM D257 at 50% RH Electrostatic Discharge FTMS 101, Method 4046 >104 Ohms per square 12 <10 Ohms per square <.02 seconds tape illustration REEL COVER TAPE CARRIER TAPE D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. Sheet 1 of 6 T & R Codes and Information (D4-D041) T&R Code Case Style F1 KK81 24 12 TT1618 16 12 16 F2 F4 F5 F6 F8 F9 F10 F11 F12 F14 F15 F16 Reel Size (inch) QTY per Reel 13 7 13 900 10, 20, 50, 100, 200 see note 2 500 12 13 500 12 8 7 13 20, 50, 100, 500, 1000 see note 2 2000, 4000 32 16 13 500 32 16 13 500 8 24 4 16 7 13 3000 500 24 16 13 500 24 24 12 24 24 8 13 13 7 7 500 20, 50, 100, 200, 500 see note 2 24 12 13 500 AF190, AF190-1 12 8 7 AT790 12 8 AT1667 12 8 13 7 13 12 8 20,50,100,200,500, 1000 see note 2 2000 20,50,100,200 500,1000,2000 see note 2 1000, 2500, see note 1 1000, 2500 20, 50, 100, 200, 500, 1000, 2500 see note 2 1000, 2500, see note 1 TT100, TT240, TT1224, TT1423, TT1491, TT1491-1 WW107, WW107-1 YY101 YY161 BK276 BK343 QQQ569 BJ360 DT855 HF1138, HF1139 HF1317, HF1392 HF1458, HF1485 JW1441 MQ1770 JB1233-1 HZ1198 MMM168 NNN150 QQQ130 QQQ1358 BJ937, BJ937-1 BJ1051 BJ293, BJ293-1 CJ608 CJ725 JQ1382 SM34 BBB123 RRR137 RRR137-1 TTT166, TTT166-1 TTT167, TTT167-1 TTT881, TTT1289 HA1069 XX211-1 XX211 Tape Width Device Cavity (mm) Pitch (mm) XX746 D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. 7 10,20,50,100,200 see note 2 Sheet 2 of 6 T&R Code Case Style Device Tape Width Cavity Pitch (mm) Reel Size (inch) 24 16 12 16 8 12 13 7 13 20 50 100 200 500 1000 Standard 2000 Non Standard 2500 20, 50, 100, 200, 500 see note 2 500 1000, 2000 32 32 13 200 16 12 13 500 44 32 13 125 12 44 8 32 7 13 1000 125 24 8 12 4 13 7 500 20, 50, 100, 200, 500, 1000 see note 2 16 12 13 1500 16 12 13 1000 16 12 24 12 13 7 13 500, 1000, see note 2 20, 50, 100, 200, see note 2 500 AT1521, AT224 F17 F18 F19 F20 F21 F24 F25 F26 F27 F28 F29 F31 F34 F36 AT224-1 AT224-2 AT224-3 AT790-1 AN213 XX112 VV105 BG291 HU1186, HU1374 BH292 CB518 CB539 AT577-3 BG419 BL301 AF320 JF1258 HD1131 DK801 DK1042, DK1182 DK1171, DK1515 BJ398 CA531, CA531-1 CD541 CM624 CD636 SM1 SM2 SM1L SM33 SM31 DZ885 DZ885-2 DZ943 DZ943-G1 DZ943-GC1 DZ943-GC2 DZ944 DZ944-G1 DZ944-GC1 DZ944-2 DZ944-GC2 DZ883 DZ1034 DZ1383-2 LZ1624 CD542, CD636, DZ1650 MW1654 CG581 QTY per Reel 7 12 8 13 D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. Small quantity standards (see note 2) Sheet 3 of 6 T&R Code Case Style Tape Width Device Cavity (mm) Pitch (mm) Reel Size (inch) QTY per Reel 24 16 13 500 F43 F46 CH513 CH549 CK605 CK605-1 CK1113 CK829 CK1746 DV874 DV897 HE1135 HE1354 CK1246 CK1246-1 LW1611 CL620 CL620-1 CD637 16 16 16 8 8 12 F47 DB714, DB1627 12 8 F48 F50 F53 SM18 TT241 SM20A 24 24 32 12 12 16 7 7 13 13 7 13 13 13 F55 DF782 12 8 7 F56 F57 BJ850 QQQ828 32 24 16 12 F58 DL805 12 8 F59 F60 DH820 CZ682 AH202, AH202-1, AH202-2, AH1415, AH1557 DQ1225 DL1721, LZ1736, LZ1737, MC1631-1, NF1846-1 DL1020 MW1663-2 12 24 8 16 13 13 7 13 7 13 20, 50, 100, 200, 500, See Note2 20, 50, 100, 200, 500, See Note2 900 1000, 2000 20, 50, 100, 200, 500, See Note2 1000 500 500 20, 50, 100, 200, 500, 1000, See Note 2 1000 1000 1000 2000, 4000 1000 1000 24 12 13 200 8 4 7 8 4 7 12 8 7 12 8 13 2000 20, 50, 100, 200, 500, 1000, 2000 See Note 2 20, 50, 100, 200, 500, 1000, See Note 2 20, 50, 100, 200, 500, 1000, See Note 2 2000, 4000 see note 2 20, 50, 100, 200, 500, 1000, See Note 2 2000, 4000 7 1000 13 2000, 4000 13 125 20, 50, 100, 200,500, 1000, see note 2 2000 20, 50, 100, 200, 500, 1000, 3000, see note 2 F37 F61 F66 DL1636 DG1677 F68 FG873 F69 FR933 GF981, GF995 DG983, DG1886 DG984 DU674 F70 DG1293 7 13 12 12 8 7 8 44 32 12 8 7 13 F71 F72 FV1206 FV1206-4 FW856 8 4 7 12 8 13 D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. 2000, 4000 Sheet 4 of 6 T&R Code Case Style F73 AT577; AT577-2 12 GE0805C-1, JV1210C-1 GE0805C-2, JV1210C FV1206-1, FV1206-3, FV1206-7 ,JC0603C-1 F74 F75 F76 Reel Size (inch) QTY per Reel 8 7 13 500 2000 8 4 7 20, 50, 100, 200, 500, 1000, 2000, See Note 2 8 4 7 8 4 7 12 8 7 13 13 12 8 7 12 12 8 8 13 13 2000 20, 50, 100, 200, 500, 1000, 3000, See Note 2 20,50,100,200,500 see note 2 1000,2000 2000 20, 50, 100, 200, 500, 1000, See Note 2 2000 2000 16 12 13 1000 LZ1671 16 12 AN1102 HR1176 HR1843 PA2002 CA1389 HV1195 HQ1157 HQ1806 JB1233, JB1233-1 HV1278 JH1286 JR1384 24 16 13 7 13 500, 1000 20, 50, 100, 200 See Note 2 500 44 40 13 100 8 12 4 8 7 7 3000 500 56 16 13 100 32 12 12 8 13 TBD 500 TBD 44 20 13 250 12 8 7 20, 50, 100, 200, 500, 1000, See Note 2 3000 100 100 AT1029, Tape Width Device Cavity (mm) Pitch (mm) AT1030, AT1642 F77 F78 F79 F80 F81 F82 F83 F84 F85 F86 F87 F88 F89 GU1604, MZ4532C GU1041 FZ802 FZ990 GP731 GP1212 GQ1018 DG983-1, DG983-2 DG1235 JK1226 BL1543, BL1543-1, HP1156 44 24 13 13 56 32 13 F90 MMM1362 8 4 7 F91 F92 JS1370 JM1360 16 16 12 8 F93 JZ1436 12 4 F94 KA1444 12 8 F95 F96 KJ1367, KJ1373 KN1368 KL942 KL1294 KV1710 JG1228 JG1835 24 56 24 40 13 7 7 13 7 13 13 13 20, 50, 100, 200, 500, 1000, 2000, 3000, See Note 2 2000 1000 1000 3000 1000 3000 500 100 44 32 13 200 44 32 13 125 F97 F99 D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. Sheet 5 of 6 T&R Code Case Style F100 KM1479 24 24 13 F101 CA1389 8 4 7 F102 GU1414 12 8 13 F103 AH1503 32 16 13 F104 DQ849 8 4 7 F105 KR1508 KS1509 KU1513 KV1514 NT1997 AH1596 BK377 PD1647-1 PD1647-3 PE1259 MC1631, MT1817, MT1818 AH1647 DL1807 MP1766 NC1916 NY2000 GE0805-1,GE0805C-2, GE0805C-3, GE0805C-4, GE0805C-9, GE0805C-10, JV1210C1, JC0603C, JC0603C-1 56 24 13 500 20, 50, 100, 200, 500, 1000, 2000 See Note 2 20, 50, 100, 200, 500, 1000, See Note 2 200 20, 50, 100, 200, 500, 1000, 2000, See Note 2 250 44 24 13 250 32 20 13 200 12 4 7 32 12 32 16 8 24 13 13 13 20, 50, 100, 200, 500, 1000, 3000, See Note 2 200 2000 400 24 20 13 400 8 4 7 20,50,100,200,500,1000,4000 See Note 2 F115 - - - - - F116 TT1356 24 12 13 10, 20, 50, 100, 200, 500 See Note 2 F106 F107 F108 F109 F110 F111 F113 F114 Tape Width Device Cavity (mm) Pitch (mm) Reel Size (inch) QTY per Reel Notes: 1. 2. BP, MSW. MSWA models available in 13” reel only. Consult individual model datasheet to determine device per reel availability. © 2015 Mini-Circuits IMPORTANT NOTICE This document is provided as an accommodation to Mini-Circuits customers in connection with Mini-Circuits parts only. In that regard, this document is for informational and guideline purposes only. Mini-Circuits assumes no responsibility for errors or omissions in this document or for any information contained herein. Mini-Circuits may change this document or the Mini-Circuits parts referenced herein (collectively, the “Materials”) from time to time, without notice. Mini-Circuits makes no commitment to update or correct any of the Materials, and Mini-Circuits shall have no responsibility whatsoever on account of any updates or corrections to the Materials or Mini-Circuits’ failure to do so. Mini-Circuits customers are solely responsible for the products, systems, and applications in which Mini-Circuits parts are incorporated or used. In that regard, customers are responsible for consulting with their own engineers and other appropriate professionals who are familiar with the specific products and systems into which Mini-Circuits’ parts are to be incorporated or used so that the proper selection, installation/integration, use and safeguards are made. Accordingly, Mini-Circuits assumes no liability therefor. In addition, your use of this document and the information contained herein is subject to Mini-Circuits’ standard terms of use, which are available at Mini-Circuits’ website at www.minicircuits.com/homepage/terms_of_use.html. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation: (i) by Mini-Circuits of such third-party’s products, services, processes, or other information; or (ii) by any such third-party of Mini-Circuits or its products, services, processes, or other information. D4-D041 Rev.: BY M151957 (08/03/15) File: D4D041.doc This document and its contents are the property of Mini-Circuits. Sheet 6 of 6