APPLICATION NOTE TVA‐11‐422A+ PCN Report AN‐60‐079 As a result of the introduction of RoHS compliant version and assembly option at an alternate qualified Mini‐ Circuits facility, the replacement part has been judged by the Mini‐Circuits Engineering team as a suitable replacement for the existing TVA‐11‐422a. CASE STYLE ORIGINAL PART: TVA‐11‐422 REPLACEMENT PART: TVA‐11‐422A+ CASE STYLE: AP1603 CASE STYLE: PJ2059‐1 a. Suitability within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN‐60‐079 Rev.: OR (M152618) 08/31/15 File: AN60079.com This document and its contents are the property of Mini‐Circuits. Sheet 1 of 5 APPLICATION NOTE CONCLUSION: 1) FIT and FORM change for RoHS version 2) FUNCTIONAL changes as follows: Parameter Gain Gain Flatness Input VSWR Output VSWR P1dB OIP3 Original Part, TVA‐11‐422 36dB min, 42dB typ +/‐1dB typ, +/‐1.5dB max 1.35:1 typ 1.7:1 typ 28dBm min*, 30dBm typ *27dBm at 10‐700MHz 44dBm typ Replacement Part, TVA‐11‐422A+ 35dB min, 39dB typ +/‐1.3dB typ 1.7:1 typ 1.8:1 typ 28dBm min**, 30dBm typ **26dBm at 3600‐4200MHz 40dBm typ a. Suitability within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN‐60‐079 Rev.: OR (M152618) 08/31/15 File: AN60079.com This document and its contents are the property of Mini‐Circuits. Sheet 2 of 5 APPLICATION NOTE 3) TYPICAL PERFORMANCE COMPARISONa: TAMB=25°C Parameter Freq (MHz) Gain (dB) Gain Flatness (dB) Input VSWR (:1) Output VSWR (:1) P1dB (dBm) 10-4200 10-4200 10-4200 10-4200 10-3600 3600-4200 10-4200 10-4200 ----- OIP3 (dBm) Noise Figure (dB) AC Supply (V) Non RoHS (TVA-11-422) Data of 1 unit Min Max 41.11 42.39 ----+/-0.64 ----1.56 ----1.92 30.36 ----29.68 ----42.63 --------16.18 ----110/220 RoHS (TVA-11-422A+) Data of 2 units Min Max 37.61 40.17 ----+/-1.28 ----2.53 ----2.72 30.04 ----27.53 ----38.47 --------12.7 ----110/220 a. Suitability within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN‐60‐079 Rev.: OR (M152618) 08/31/15 File: AN60079.com This document and its contents are the property of Mini‐Circuits. Sheet 3 of 5 APPLICATION NOTE COMPARISON PERFORMANCE CURVESa: TAMB=25°C a. Suitability within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN‐60‐079 Rev.: OR (M152618) 08/31/15 File: AN60079.com This document and its contents are the property of Mini‐Circuits. Sheet 4 of 5 APPLICATION NOTE IMPORTANT NOTICE © 2015 Mini-Circuits This document is provided as an accommodation to Mini-Circuits customers in connection with Mini-Circuits parts only. In that regard, this document is for informational and guideline purposes only. Mini-Circuits assumes no responsibility for errors or omissions in this document or for any information contained herein. Mini-Circuits may change this document or the Mini-Circuits parts referenced herein (collectively, the “Materials”) from time to time, without notice. Mini-Circuits makes no commitment to update or correct any of the Materials, and Mini-Circuits shall have no responsibility whatsoever on account of any updates or corrections to the Materials or Mini-Circuits’ failure to do so. Mini-Circuits customers are solely responsible for the products, systems, and applications in which Mini-Circuits parts are incorporated or used. In that regard, customers are responsible for consulting with their own engineers and other appropriate professionals who are familiar with the specific products and systems into which Mini-Circuits’ parts are to be incorporated or used so that the proper selection, installation/integration, use and safeguards are made. Accordingly, Mini-Circuits assumes no liability therefor. In addition, your use of this document and the information contained herein is subject to Mini-Circuits’ standard terms of use, which are available at Mini-Circuits’ website at www.minicircuits.com/homepage/terms_of_use.html. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation: (i) by Mini-Circuits of such thirdparty’s products, services, processes, or other information; or (ii) by any such third-party of Mini-Circuits or its products, services, processes, or other information. a. Suitability within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN‐60‐079 Rev.: OR (M152618) 08/31/15 File: AN60079.com This document and its contents are the property of Mini‐Circuits. Sheet 5 of 5