Surface Mount JMS-2W+ JMS-2W Frequency Mixer Level 7 (LO Power +7 dBm) 5 to 1200 MHz Maximum Ratings Operating Temperature Features Storage Temperature -55°C to 100°C RF Power 50mW IF Current 40mA CASE STYLE: BH292 • excellent L-R isolation and L-I isolation, up to 60 dB typ. • miniature surface mount • J-leads for strain relief and excellent solderability -40°C to 85°C Permanent damage may occur if any of these limits are exceeded. Pin Connections LO6 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • up & down converters for receivers & transmitters • UHF TV • cellular/ISM/GSM RF3 IF2 GROUND1,4,5 Electrical Specifications FREQUENCY (MHz) Outline Drawing LO/RF CONVERSION LOSS (dB) Mid-Band m IF fL-fU PCB Land Pattern 5-1200 DC-500 — X σ Max. 6.8 .10 8.0 LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) L M U L M U Total Range Max. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 9.0 1 dB COMP.: +1 dBm typ. Phase detection, positive polarity 60 40 60 30 37 L = low range [fL to 10 fL] m= mid band [2fL to fU/2] 20 60 40 48 20 M = mid range [10 fL to fU/2] 31 IP3 at center band (dBm) Typ. 15 17 U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .280 7.11 B .310 7.87 C --- D .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L .300 7.62 E .225 5.72 F .055 1.40 G .100 2.54 wt grams 0.45 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) RF LO 5.00 10.00 15.30 29.94 50.00 35.00 40.00 45.30 59.94 80.00 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +7dBm LO +7dBm LO +7dBm LO +7dBm LO +7dBm 6.50 6.43 6.43 6.49 6.45 62.55 62.08 62.44 62.14 62.11 59.95 59.28 58.34 56.11 53.65 1.46 1.44 1.43 1.40 1.39 1.69 1.67 1.69 1.68 1.67 81.92 102.45 160.26 200.43 350.63 111.92 132.45 130.26 170.43 320.63 6.52 6.47 6.44 6.34 6.30 62.44 62.71 65.46 65.54 53.86 50.79 49.36 46.82 45.89 42.07 1.44 1.45 1.44 1.46 1.46 1.64 1.63 1.64 1.69 1.79 438.53 548.47 600.00 613.38 685.97 408.53 518.47 570.00 583.38 655.97 6.29 6.28 6.34 6.32 6.45 49.13 44.85 43.57 43.25 41.28 40.13 37.77 36.59 36.40 34.97 1.45 1.42 1.40 1.38 1.33 1.90 2.05 2.15 2.16 2.29 767.15 959.47 1073.01 1120.00 1200.00 737.15 929.47 1043.01 1090.00 1170.00 6.66 7.03 7.10 7.17 7.25 40.04 37.35 36.16 36.10 35.69 33.20 31.24 30.62 30.60 30.56 1.24 1.04 1.32 1.47 1.62 2.44 2.85 3.17 3.18 3.41 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. C M151107 JMS-2W ED-2834/10 DJ/CP/AM 150814 Page 1 of 2 JMS-2W+ JMS-2W Performance Charts at IF Freq of 30 MHz LO=+4 dBm 9.0 LO=+7 dBm 80 LO=+10 dBm 8.0 7.0 70 60 50 40 6.0 30 5.0 20 0 200 JMS-2W L-R ISOLATION 90 ISOLATION (dB) CONVERSION LOSS (dB) 10.0 JMS-2W CONVERSION LOSS 400 600 800 FREQUENCY (MHz) 1000 LO=+4 dBm 0 1200 200 1000 1200 JMS-2W RF VSWR 70 2.0 LO=+4 dBm 60 LO=+7 dBm LO=+10 dBm 1.8 50 40 VSWR ISOLATION (dB) LO=+10 dBm 400 600 800 FREQUENCY (MHz) JMS-2W L-I ISOLATION 30 20 10 LO=+4 dBm LO=+7 dBm 1.6 1.4 1.2 LO=+10 dBm 1.0 0 0 200 400 600 800 FREQUENCY (MHz) 1000 0 1200 200 400 600 800 FREQUENCY (MHz) JMS-2W LO VSWR 4.5 LO=+4 dBm 4.0 LO=+7 dBm 2.2 2.0 3.0 1.8 2.5 1.6 2.0 1.4 1.5 1.2 1.0 1.0 200 400 600 800 FREQUENCY (MHz) 1200 2.4 LO=+10 dBm 3.5 0 1000 JMS-2W IF VSWR VSWR VSWR LO=+7 dBm 1000 1200 LO=+4 dBm 0 100 LO=+7 dBm 200 300 FREQUENCY (MHz) LO=+10 dBm 400 500 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2