Coaxial Frequency Mixer ZLW-186MH Level 13 (LO Power +13 dBm) 2 to 2500 MHz Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power 200mW IF Current 40mA HT-Series Tight Spot SMA Wrench From $24.95 Features • low conversion loss, 6.9 dB typ. • wideband, 2 to 2500 MHz • good L-R isolation, 35 dB typ., L-I, 49 dB typ. • rugged shielded case Permanent damage may occur if any of these limits are exceeded. Applications Coaxial Connections • VHF/UHF • cellular • GPS • PCS • ISM • instrumentation LO1 RF3 IF2 LO/RF CONVERSION LOSS (dB) LO-RF ISOLATION (dB) Mid-Band m IF fL-fU 2-2500 Price $69.95 ea. $5.00 $1.50 Qty. (1-9) (1+) (1+) Electrical Specifications FREQUENCY (MHz) Outline Drawing CASE STYLE: M21 ConnectorsModel SMA ZLW-186MH BRACKET (OPTION “B”) BRACKET (OPTION “BR”) 2-1000 — X σ 6.9 0.11 L Total Range Max. Max. 8.5 1 dB COMP.: +9 dBm typ. 9.5 LO-IF ISOLATION (dB) M U L M U Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 33 25 35 25 30 20 42 25 49 25 32 20 L = low range [fL to 10 fL] m= mid band [2fL to fU/2] M = mid range [10 fL to fU/2] U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) RF 2.00 5.00 10.00 50.00 100.00 Outline Dimensions ( inch mm ) A 1.50 38.10 B 1.13 28.70 C 1.00 25.40 D .50 12.70 E .155 3.94 F 2.345 59.56 G .138 3.51 H .987 25.07 J 2.50 63.50 K .10 2.54 L .31 7.87 M .75 19.05 N 1.19 30.23 P .66 16.76 S wt .150 grams 3.81 40.0 208.60 417.09 500.00 625.59 834.08 1000.00 1042.58 1251.07 1459.57 1500.00 1668.06 1876.56 2000.00 2085.05 2293.55 2470.00 2500.00 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO 32.00 35.00 40.00 80.00 130.00 5.33 5.25 5.14 5.26 5.33 42.0 41.9 41.9 42.2 42.4 49.4 49.5 49.6 50.2 50.9 1.34 1.35 1.35 1.34 1.37 1.46 1.46 1.45 1.48 1.50 238.60 447.09 530.00 655.59 864.08 5.65 5.88 6.03 6.28 6.33 43.2 46.8 48.9 50.9 48.9 54.4 65.7 61.2 54.1 48.5 1.54 2.01 2.25 2.55 2.76 1.49 1.46 1.48 1.51 1.73 1030.00 1072.58 1281.07 1489.57 1530.00 6.45 6.33 6.09 6.34 6.31 44.2 43.1 39.5 38.0 38.2 42.7 42.1 40.3 40.0 39.3 2.96 2.80 2.52 2.30 2.25 1.81 1.77 1.66 1.58 1.53 1698.06 1906.56 2030.00 2115.05 2323.55 2500.00 2530.00 6.86 6.95 6.79 6.83 7.04 7.06 7.09 36.5 35.2 34.2 33.3 32.5 31.8 31.2 37.4 38.0 38.1 38.2 37.4 34.5 33.5 2.04 1.91 1.89 1.70 1.47 1.26 1.23 1.56 1.59 1.61 1.61 1.65 1.68 1.70 Electrical Schematic LO RF IF Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M93710 ZLW-186MH DJ/TD/CP/AM 130913 ZLW-186MH Performance Charts ZLW-186MH CONVERSION LOSS 8.0 55 7.5 L-R ISOLATION (dB) CONVERSION LOSS (dB) ZLW-186MH L-R ISOLATION at IF Freq of 30 MHz 7.0 6.5 6.0 5.5 50 45 40 35 30 5.0 0 500 1000 1500 FREQUENCY (MHz) 2000 0 2500 500 ZLW-186MH L-I ISOLATION 2500 3.5 3.0 60 RF VSWR L-I ISOLATION (dB) 2000 ZLW-186MH RF VSWR 70 50 40 2.5 2.0 1.5 30 1.0 0 500 1000 1500 FREQUENCY (MHz) 2000 2500 0 500 1000 1500 FREQUENCY (MHz) 2000 2500 2000 2500 ZLW-186MH LO VSWR ZLW-186MH IF VSWR 2.0 2.0 1.8 1.8 LO VSWR IF VSWR 1000 1500 FREQUENCY (MHz) 1.6 1.4 1.2 1.6 1.4 1.2 1.0 1.0 0 200 400 600 FREQUENCY (MHz) 800 1000 0 500 1000 1500 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]