ADEX-10L+ ADEX-10L Surface Mount Frequency Mixer Level 4 (LO Power +4 dBm) 10 to 1000 MHz Maximum Ratings Operating Temperature Storage Temperature -40°C to 85°C -55°C to 100°C RF Power 50mW IF Current 40mA CASE STYLE: CD542 Features Permanent damage may occur if any of these limits are exceeded. Pin Connections • excellent L-R isolation, 60 dB typ. • low conversion loss, 7.2 dB typ. • flat conversion loss ±0.2 dB typ. over entire band • good VSWR, 1.5:1 typ. for LO & RF, 1.8:1 Typ. for IF • good performance to 1500 MHz • aqueous washable • protected by U.S. Patents 6,133,525 & 6,947,717 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500 500,1000 Reel Size 7” 13” LO6 Applications RF3 •cellular •PCN IF2 GROUND1,4,5 Electrical Specifications FREQUENCY (MHz) Outline Drawing LO/RF CONVERSION LOSS (dB) Mid-Band m IF fL-fU 10-1000 DC-800 — X σ Max. Total Range Max. 7.2 0.10 8.2† 8.8† 1 dB COMP.: +1 dBm typ. † Conversion loss increases 0.8 dB when IF is above 150 MHz LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) IP3 at center band (dBm) L M U L M U Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 75 60 47 40 33 24 55 40 L = low range [fL to 10 fL] m= mid band [2fL to fU/2] 37 26 20 M = mid range [10 fL to fU/2] Typ. 13 16 U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) PCB Land Pattern RF Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) A .272 6.91 B .310 7.87 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .112 2.84 F .055 1.40 G .100 2.54 wt grams 0.20 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) LO Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +4dBm LO +4dBm LO +4dBm LO +4dBm LO +4dBm 10.00 25.00 55.00 70.00 100.00 40.00 55.00 85.00 100.00 130.00 7.30 7.23 7.27 7.31 7.37 82.88 82.79 80.30 78.35 75.43 58.83 51.06 44.57 42.47 39.36 1.54 1.54 1.53 1.53 1.51 1.18 1.13 1.12 1.14 1.15 172.00 244.00 316.00 352.00 424.00 202.00 274.00 346.00 382.00 454.00 7.31 7.21 7.20 7.13 7.19 68.52 64.68 61.44 60.51 61.30 34.38 31.33 29.83 29.38 28.92 1.48 1.46 1.44 1.43 1.43 1.21 1.25 1.29 1.28 1.28 460.00 532.00 604.00 640.00 712.00 490.00 562.00 634.00 670.00 742.00 7.21 7.21 7.46 7.49 7.58 61.56 59.88 57.30 55.44 52.02 28.63 28.24 27.79 27.54 26.70 1.42 1.39 1.40 1.40 1.40 1.27 1.27 1.29 1.30 1.34 748.00 820.00 856.00 928.00 1000.00 778.00 850.00 886.00 958.00 1030.00 7.46 7.38 7.34 7.43 7.65 51.61 51.53 52.51 51.02 47.97 25.74 23.84 22.81 21.76 21.23 1.40 1.39 1.39 1.35 1.27 1.38 1.38 1.42 1.48 1.57 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 ADEX-10L DJ/TD/CP/AM 150518 Page 1 of 2 ADEX-10L+ ADEX-10L Performance Charts at IF Freq of 30 MHz 12.0 LO=+1 dBm 11.0 CONVERSION LOSS (dB) ADEX-10L CONVERSION LOSS LO=+4 dBm 120 LO=+7 dBm ISOLATION (dB) 9.0 8.0 7.0 6.0 LO=+4 dBm LO=+7 dBm 100 90 80 70 60 50 5.0 40 4.0 0 200 400 600 FREQUENCY (MHz) 800 0 1000 ADEX-10L L-I ISOLATION 90 80 LO=+1 dBm LO=+4 dBm 200 400 600 FREQUENCY (MHz) LO=+1 dBm 3.5 70 800 1000 ADEX-10L RF VSWR 4.0 LO=+7 dBm LO=+4 dBm LO=+7 dBm 3.0 60 VSWR ISOLATION (dB) LO=+1 dBm 110 10.0 50 40 2.5 2.0 30 1.5 20 1.0 10 0 200 400 600 FREQUENCY (MHz) 800 0 1000 200 ADEX-10L LO VSWR 4.0 400 600 FREQUENCY (MHz) 800 1000 ADEX-10L IF VSWR 4.0 LO=+1 dBm 3.5 LO=+4 dBm LO=+7 dBm LO=+1 dBm 3.5 3.0 LO=+4 dBm LO=+7 dBm 3.0 VSWR VSWR ADEX-10L L-R ISOLATION 2.5 2.0 2.5 2.0 1.5 1.5 1.0 0 200 400 600 FREQUENCY (MHz) 800 1000 1.0 0 116 232 348 FREQUENCY (MHz) 464 580 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2