APPLICATION NOTE REPLACEMENT PART REFERENCE GUIDE: ORIGINAL PART: REPLACEMENT PART: AN‐60‐059 MAV‐11SM+ (Mini‐Circuits) & MSA‐1105 (Avago Technologies) MAV‐11BSM+ The MAV‐11BSM+ has been designed by Mini‐Circuits Engineering as a replacement for both the MAV‐11SM+ (Mini‐Circuits) and MSA‐1105 (Avago Technologies)a,b,c,d APPLICATION CIRCUITS ORIGINAL PART: MAV‐11SM+ (Mini‐Circuits) & MSA‐1105 (Avago Technologies) REPLACEMENT PART: MAV‐11BSM+ CONCLUSION: 1) FORM‐FIT‐FUNCTIONAL COMPATIBLE: Same Circuit 2) Typical Performance Comparison a,b: Performance Gain (dB) Noise Figure (dB) Pout 1dB (dBm) Output IP3 (dBm Input Return Loss (db) Output Return Loss (dB) Operating Voltage (V) Operating Current (mA) Status Condition(GHz) 1.0 0.5 0.5 0.5 0.05‐1 0.05‐1 ‐‐‐ ‐‐‐ ‐‐‐ MAV‐11SM+/MSA‐1105 10.5 3.6 17.5 +30 14 11.5 See table above 60 Qualified, last time buy MAV‐11BSM+ 11.3 4.4 18.2 +36.5 14‐24 22 See table above 60 Qualified, in production Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The MSA‐1105 part number is used for identification and comparison purposes only. c. Avago Technologies is a trademark of Avago Technologies and is in no way affiliated with Mini‐Circuits d. Data for the MSA‐1105 was taken from Avago Technologies published data sheet. Rev: Draft 1 Page: 1 of 2 APPLICATION NOTE COMPARISON PERFORMANCE CURVES: Pout 1dB vs. FREQUENCY GAIN vs. FREQUENCY 20 14 18 10 Pout(dBm) GAIN (dB) 12 8 6 16 14 4 MAV-11BSM+ 2 12 MAV-11BSM+ MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 10 0 200 400 600 800 1000 MHz 0 600 35 35 RETURN LOSS (dB) 40 30 25 20 15 10 MAV-11BSM+ 1000 30 25 20 15 10 MAV-11BSM+ 5 MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 0 0 200 400 600 800 0 1000 MHz 200 400 800 1000 OIP3 vs. FREQUENCY 6 45 5 40 OIP3 (dBm) 4 3 2 35 30 25 MAV-11BSM+ 1 600 MHz NOISE FIGURE vs. FREQUENCY MAV-11BSM+ MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 20 0 200 400 600 MHz 800 OUTPUT RETURN LOSS vs. FREQUENCY 40 5 NOISE FIGURE(dB) 400 MHz INPUT RETURN LOSS vs. FREQUENCY RETURN LOSS (dB) 200 800 1000 0 200 400 600 800 1000 MHz Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The MSA‐1105 part number is used for identification and comparison purposes only. c. Avago Technologies is a trademark of Avago Technologies and is in no way affiliated with Mini‐Circuits d. Data for the MSA‐1105 was taken from Avago Technologies published data sheet. Rev: Draft 1 Page: 2 of 2