Surface Mount Frequency Mixer ADE-1MH+ ADE-1MH Level 13 (LO Power +13 dBm) 2 to 500 MHz Maximum Ratings Operating Temperature Features -40°C to 85°C Storage Temperature -55°C to 100°C RF Power 200mW IF Current 40mA Permanent damage may occur if any of these limits are exceeded. Pin Connections • good L-R isolation, 50 dB typ. L-I isolation, 45 dB typ. • low profile package • aqueous washable • protected by U.S. Patent 6,133,525 CASE STYLE: CD542 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications and Reel Available Tape cost at no extra Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 Applications LO6 • cellular • VHF/UHF receivers RF3 Reel Size 7” 13” IF2 GROUND1,4,5 Electrical Specifications FREQUENCY (MHz) Outline Drawing LO/RF CONVERSION LOSS (dB) Mid-Band m 2-500 DC-500 LO-IF ISOLATION (dB) IP3 at center band (dBm) M U L M U σ Max. Total Range Max. L — X Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. 5.2 0.10 6.5 8.0 60 45 50 35 48 25 55 40 45 30 40 22 17 IF fL-fU LO-RF ISOLATION (dB) 1 dB COMP.: +9 dBm typ. L = low range [fL to 10 fL] m= mid band [2fL to fU/2] M = mid range [10 fL to fU/2] U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) PCB Land Pattern RF Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) A .272 6.91 B .310 7.87 C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .112 2.84 F .055 1.40 G .100 2.54 wt grams 0.20 Demo Board MCL P/N: TB-03 Suggested PCB Layout (PL-052) LO Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO +13dBm 2.0032.00 6.40 61.5052.501.482.37 5.0035.00 5.96 60.8351.001.242.37 10.0040.00 5.71 60.0051.001.152.46 20.0050.00 5.63 58.0049.671.102.51 35.1065.10 5.49 55.5048.001.082.46 50.0080.00 5.62 53.8346.171.072.41 70.09 100.09 5.57 53.01 44.50 1.06 2.46 105.09 135.09 5.52 50.16 40.67 1.05 2.36 140.08 170.08 5.48 48.66 41.00 1.05 2.41 175.08 205.08 5.74 50.67 40.00 1.09 2.36 210.07 245.07 250.00 280.06 350.05 240.07 275.07 280.00 310.06 380.05 5.82 5.78 5.79 5.71 5.82 48.84 47.00 46.83 47.00 43.50 39.50 38.17 38.17 37.17 35.17 1.11 1.12 1.12 1.12 1.14 2.46 2.51 2.46 2.51 2.51 385.05 420.04 470.00 490.03 500.00 415.05 450.04 500.00 520.03 530.00 5.92 5.88 5.72 5.86 5.67 41.17 39.83 38.50 38.00 37.33 33.00 30.67 30.67 30.34 30.33 1.19 1.24 1.27 1.26 1.26 2.61 2.67 2.67 2.79 2.67 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. F M151107 ADE-1MH ED-7022/1 DJ/TD/CP/AM 150513 Page 1 of 2 ADE-1MH+ ADE-1MH Performance Charts CONVERSION LOSS (dB) 7.0 at IF Freq of 30 MHz ADE-1MH CONVERSION LOSS 70 ISOLATION (dB) 6.0 5.0 4.0 LO=+10 dBm LO=+13 dBm ADE-1MH L-R ISOLATION LO=+16 dBm 60 50 40 30 20 3.0 0 100 200 300 FREQUENCY (MHz) 400 0 500 ADE-1MH L-I ISOLATION 60 100 200 300 FREQUENCY (MHz) 1.8 LO=+16 dBm 400 500 LO=+10 dBm LO=+13 dBm LO=+16 dBm 1.6 40 VSWR ISOLATION (dB) LO=+13 dBm ADE-1MH RF VSWR 50 30 20 1.4 1.2 10 LO=+10 dBm 0 0 100 LO=+13 dBm 200 300 FREQUENCY (MHz) LO=+16 dBm 1.0 400 0 500 100 200 300 FREQUENCY (MHz) ADE-1MH LO VSWR 5.0 400 500 ADE-1MH IF VSWR 2.6 4.5 LO=+10 dBm LO=+13 dBm LO=+16 dBm 2.2 3.5 2.0 3.0 2.5 1.4 1.2 100 200 300 FREQUENCY (MHz) 400 500 LO=+16 dBm 1.6 1.5 0 LO=+13 dBm 1.8 2.0 1.0 LO=+10 dBm 2.4 4.0 VSWR VSWR LO=+10 dBm 1.0 0 100 200 300 FREQUENCY (MHz) 400 500 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2