® top hat Surface Mount Power Splitter/Combiner 2 Way-0° 75Ω TCP-2-122-75X+ 5 to 1250 MHz Features • low insertion, 0.8 dB typ. • excellent amplitude unbalance, 0.3 dB typ. • very good phase unbalance, 1.0 deg. typ. • external resistor & capacitor required • aqueous washable • leads for excellent solderability • low cost CASE STYLE: DB1627 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • DOCSIS® 3.1 Systems • VHF/UHF • CATV • cellular Reel Size 7” 13” e and Reel Available Tapra cost at no ext Devices/Reel 20, 50, 100, 200, 500 1000, 2000 Electrical Specifications at 25°C Parameter Frequency (MHz) Frequency Range Min. Typ. 5 Insertion Loss Above 3.0 dB Isolation Phase Unbalance Amplitude Unbalance VSWR (Port S) VSWR (Port 1-2) Max. Unit 1250 MHz 5-50 — 0.5 0.7 50-1000 — 0.8 1.3 1000-1250 — 1.0 1.9 5-1000 19 25 — 1000-1250 17 23 — 5-1000 — 1.0 3 1000-1250 — 2.0 5 5-1000 — 0.3 0.6 1000-1250 — 0.5 0.8 5-1000 — 1.3 1.6 1000-1250 — 1.6 1.9 5-1000 — 1.3 1.8 1000-1250 — 1.6 1.9 dB dB Degree dB :1 :1 Pin Connections Maximum Ratings Parameter Function Ratings Pin Number Operating Temperature -40°C to 85°C SUM PORT 6 Storage Temperature -55°C to 100°C PORT 1 3 0.5W max. PORT 2 4 Power Input (as a splitter) Permanent damage may occur if any of these limits are exceeded. GROUND 1 CONNECT 2,5 EXT. RESISTOR 150Ω 3,4 EXT. CAPACITOR 1.5pF 2 OR 5 TO GND Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M151380 TCP-2-122-75X+ WP/CP/AM 150528 Page 1 of 2 TCP-2-122-75X+ Outline Drawing Demo Board MCL P/N: TB-124 Suggested PCB Layout (PL-002) Lead #1 identifier shall be located in the cross hatched area shown PCB Land Pattern Total thickness: .013 inches MAX. Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .160 4.06 B .150 3.81 C .160 4.06 D .050 1.27 G .028 0.71 H .065 1.65 J .190 4.83 K .030 0.76 E .040 1.02 F .025 0.64 wt grams 0.15 Typical Performance Data Frequency (MHz) Total Loss1 (dB) S-1 5 50 100 150 250 350 450 600 700 800 925 1025 1100 1150 1250 Amplitude Unbalance (dB) S-2 3.393.15 3.363.18 3.38 3.20 3.40 3.22 3.42 3.26 3.43 3.31 3.45 3.36 3.48 3.46 3.49 3.53 3.52 3.62 3.56 3.76 3.62 3.88 3.68 4.00 3.73 4.09 3.88 4.32 Isolation (dB) 0.24 0.19 0.18 0.17 0.16 0.12 0.09 0.02 0.04 0.10 0.19 0.27 0.32 0.36 0.44 Phase Unbalance (deg.) 25.09 29.10 28.95 28.84 28.59 28.33 27.89 26.81 26.06 25.45 25.07 25.11 25.39 25.61 25.80 1.29 0.06 0.10 0.21 0.39 0.53 0.64 0.72 0.67 0.51 0.09 0.42 0.90 1.30 1.99 VSWR S VSWR 1 VSWR 2 1.04 1.27 1.01 1.19 1.04 1.18 1.06 1.18 1.10 1.18 1.14 1.18 1.17 1.19 1.20 1.21 1.21 1.24 1.21 1.27 1.23 1.32 1.25 1.36 1.28 1.39 1.30 1.41 1.35 1.45 1.19 1.14 1.14 1.15 1.17 1.21 1.24 1.29 1.33 1.36 1.41 1.45 1.49 1.52 1.59 1. Total Loss = Insertion Loss + 3dB splitter loss. TCP-2-122-75X+ TOTAL LOSS TCP-2-122-75X+ ISOLATION 40 S-2 (dB) 4.2 3.8 3.4 3.0 30 25 20 0 250 500 750 FREQUENCY (MHz) 1000 1250 #S-VSWR #1-VSWR #2-VSWR 1.6 35 VSWR S-1 (dB) ISOLATION (dB) TOTAL LOSS (dB) 4.6 TCP-2-122-75X+ VSWR 1.8 1.4 1.2 0 250 500 750 1000 FREQUENCY (MHz) 1250 1.0 0 250 500 750 FREQUENCY (MHz) 1000 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are Notes entitled to the rights and benefits therein. For a full stated statement the Standard Termsare and the exclusive rights and remedies visit Mini-Circuits’ website at A. Performance and quality attributescontained and conditions not expressly in thisof specification document intended to be excluded and do not formthereunder, a part of thisplease specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2 1250