6 5 4 3 MATERIAL AND FINISH: Insulator: Nylon, color black, UL 94V-0 rated Positive contact: See Table 1 Negative contact: Brass, Nickel plated D PDI-2032-0 PDI-2032-1 PDI-2032-2 ONLY FOR PDI-2032-1 AND PDI-2032-2 C NOTES: (1) 2032 size battery fits loosely into MPD socket P/N BH906 with 3mm (.118") diametrical clearance. 3.3±0.5 Ø22.8 TD PB RECOMMENDED PCB LAYOUT TOP VIEW B TABLE 2: CROSS REFERENCE CHART NOMINAL MEMORY SAFT KEYSTONE S.E.I. BATTERY PROTECTION SIZE DEVICES(MPD) (2032) N/A 106 2S2032-0 BH 906(1) 20.0 x 3.2 PDI PART NUMBER PB 10/26/09 B 2X 0.70 ONLY FOR PDI-2032-0 PDI-2032-0 ADD 7.4 DIM. CHNG CHCK APPR CHANGE ADD 27.3 DIM 7/10/03 2X 0.58 NEGATIVE CONTACT 6.5 A REVISIONS 3X Ø1.5 STAND OFFS 6.5 20.5 DATE DL 2016 16.5 2X Ø1.02±0.10 REV D 20.5 27.3 4 REMOVAL SLOTS TOLERANCE UNLESS OTHERWISE SPECIFIED X ± 1 X.X ± 0.4 X.XX ± 0.20 TABLE 1 PART NUMBER POSITIVE CONTACT MATERIAL PDI-2032-0 BERYLLIUM COPPER PDI-2032-1 PHOSPHOR BRONZE PDI-2032-2 BERYLLIUM COPPER 5 DL 2025 POSITIVE CONTACT 6.2 Ø20.4 6 DL 2032 C B A DURACELL 7.4 6.5 MECHANICAL SPECIFICATIONS Battery insertion force: 0.3kg-1.0kg for the initial battery insertion Spring pressure: 50g min. initial contact force at positive and negative terminals Terminal strength: Electrical and mechanical performance specifications should still be satisfied whithout terminal cracking or excessive play, with a static load of 1kg applied to the terminals in any direction; however, the terminals may bend. 1 TABLE 3: BATTERY HOLDER SELECTION GUIDE GE UNION PANASONIC SANYO CARBIDE SAFT VARTA (EVEREADY) RAYOVAC BR 2032 CR 2032 CR 2032 CR 2032 CR 2025 CR 2025 CR 2025 BR 2016 CR 2016 CR 2016 BR 2020 LM 2020 CR 2016 PART NUMBER ELECTRICAL SPECIFICATIONS Voltage & current rating: 3 VDC, 120 mA Inter contact resistance: 100 mohm max. at both the positive and negative terminals when measured between the terminals of the PDI-2032 at 1 KHz with low drainage (100mA max.) Insulation resistance: 100 Mohm min. with 500 VDC applied between the positive and negative terminals. Dielectric withstanding voltage: 500 VDC applied for one minute between the positive and negative terminals. 2 4 PLATING NICKEL NICKEL NICKEL DRAWN BY CHECK BY APPR BY GQ DATE: 03/20/02 TD DATE: 05/08/02 PB DATE: 05/08/02 3 Phone: 973 560-0019 Whippany, New Jersey Fax: 973 560-0076 A PART: COIN CELL BATTERY HOLDER PART #: SIZE: SCALE: SHEET 1 of 1 PDI-2032-X A NTS 2 ALL DIMENSIONS FOR REFERENCE ONLY DIMENSIONS ARE IN MILLIMETERS 1 REV: B