F-215 MEC8–110–02–L–DV–A MEC8–140–02–L–DV–A MEC8–120–02–L–DV–A (0,80 mm) .0315" MEC8-DV SERIES VERTICAL MICRO EDGE CARD SOCKET SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MEC8-DV Insulator Material: Black LCP Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +125°C Insertion Depth: (4,22 mm) .166" to (5,66 mm) .223" Current Rating: 1.8 A per pin (6 adjacent pins powered) Voltage Rating: 185 VAC RoHS Compliant: Yes Processing: Lead–Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (10-50) (0,15 mm) .006" max (60-70) Mates with (1,60 mm) .062" thick card Mates with: (1,60 mm) .062" thick cards Variety of lead counts APPLICATIONS –EM to –DV –DV to –DV MEC8-DV Rated @ 3dB Insertion Loss* 8,65 mm Stack Height Single-Ended Signaling 8.5 GHz / 17 Gbps Differential Pair Signaling 8.0 GHz / 16 Gbps *Performance data includes effects of a non-optimized PCB. Complete test data available at www.samtec.com?MEC8-DV or contact [email protected] MEC8 1 POSITIONS PER ROW (0,80 mm) .0315" pitch PLATING OPTION 02 DV OTHER OPTION RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality –A 10, 20, 30, 40, 50, 60, 70 = Alignment Pin –L = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail –K No. of Positions x (0,80) .0315 + (7,80) .307 ALSO AVAILABLE A • 1 mm mating card thickness option • Locking clip (Manual placement required) (2,00) .0787 Contact Samtec. OTHER SOLUTIONS Note: Some sizes, styles and options are non-standard, non-returnable. (4,00) .157 40, 50, 60 & 70 Positions (1,80) .071 • Right Angle • Edge Mount See samtec.com?MEC8-RA or samtec.com?MEC8-EM Note: While optimized for 50Ω applications, this connector with alternative signal/ground patterns may also perform well in certain 75Ω applications. Contact Samtec for further information. POSITIONS PER ROW B (MOQ Required) A B 40 (18,90) (36,60) .744 1.441 50 (22,90) (44,60) .902 1.756 60 (26,90) (52,60) 1.059 2.071 70 (30,90) (60,60) 1.217 2.386 No. of Positions x (0,80) .0315 + (4,60) .181 02 (7,00) .276 01 No. of Positions x (0,80) .0315 + (1,40) .055 (8,65) .341 (8,50) .335 (1,35) .053 (0,90) .035 DIA (8,80) .346 (0,80) .0315 10, 20 & 30 Positions –A OPTION WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. = (5,50 mm) .217" DIA Polyimide Pick & Place Pad