RIGHT ANGLE GROUND PLANE HEADER

F-215
QTS–025–01–F–D–RA
®
QTS–050–01–F–D–RA–WT
(0,635 mm) .025"
QTS-RA SERIES
RIGHT ANGLE GROUND PLANE HEADER
SPECIFICATIONS
Integral metal plane
for power or ground
Board Mates:
QSS
Right
Angle
For complete specifications and
recommended PCB layouts see
www.samtec.com?QTS-RA
Insulator Material:
Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Au or Sn over
50µ" (1,27 µm) Ni
Current Rating:
Contact:
2 A per pin
(1 pin powered per row)
Ground Plane:
15.7 A per ground plane
(1 ground plane powered)
Operating Temp Range:
-55°C to +125°C
Voltage Rating:
275 VAC mated with QSS-RA
RoHS Compliant:
Yes
Processing:
Lead–Free Solderable:
Yes
SMT Lead Coplanarity:
(0,10 mm) .004" max (025-075)
Selectively
plated
QTS-RA/QSS-RA Type
Single-Ended
Signaling
Differential Pair
Signaling
QTS-RA/QSS
Rated @ 3dB
Insertion Loss*
–D
4.50 GHz / 9 Gbps
–D
4.50 GHz / 9 Gbps
Type
Rated @ 3dB
Insertion Loss*
APPLICATIONS
HORIZONTAL
Single-Ended
–D 5.5 GHz / 11 Gbps
Signaling
Differential Pair
–D 6.0 GHz / 12 Gbps
Signaling
*Performance data includes effects of a
non-optimized PCB.
Complete test data available at
www.samtec.com?QTS-RA or contact
[email protected]
NO. OF POSITIONS
PER ROW
QTS
Guide
Post
PERPENDICULAR
01
PLATING
OPTION
RA
D
OTHER
OPTION
WT
RECOGNITIONS
For complete scope of
recognitions see
www.samtec.com/quality
–SP
–F
–025, –050, –075
–WT
= Gold Flash on Signal Pins
and Ground Plane,
Matte Tin on tails
(50 total positions per bank)
= Solder
Pin
= Weld Tab
(Not available on
25 positions)
–L
= 10µ" (0,25 µm) Gold on Signal
Pins and Ground Plane,
Matte Tin on tails
• Guide posts
• Weld tabs
ALSO AVAILABLE
(MOQ Required)
• 30µ" (0,76 µm) Gold
• Differential Pair
• “Partitionable” (combine
differential & single-ended
banks in same connector)
• Lead Style for (2,36 mm)
.093" thick board
• –LS1 Locking Screw
(Mates with QSS-RA-LS1)
• –LS2 Locking Screw
(Mates with QSS-LS2)
• 100 positions per row
Contact Samtec.
• Solder pin
option
(10,29) (3,05)
(7,11) .405 .120
.280
(3,18)
.125
DIA
01
(No. of Positions per Row/25)
x (20,00) .7875 + (5,72) .225
02
(2,03) .080
(0,635)
.025 SQ
(0,635)
.025
(1,40)
.055
(0,89)
.035 DIA
–SP OPTION
(5,08) .200
(5,97) (9,42)
.235 .371
(0,38) .015
Note: Some lengths,
styles and options are
non-standard, non-returnable.
• PCB mounting
holes
(No. of Positions per Row/25)
x (20,00) .7875 + (14,73) .580
(No. of Positions per Row/25)
x (20,00) .7875 + (8,38) .330
(3,18) .125 DIA
(6,35) .250 DIA
(1,50)
.059
(0,20) .008
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
(0,10)
.004
(0,30)
.012
(1,73)
.068