F-215 PESC–02–40–02–01–L–VT TM STRIP 40 (6,35 mm) .250"(PWR) (2,54 mm) .100"(SIG) PETC–01–40–01–01–L–VT PETC, PESC SERIES 40 A SIGNAL/POWER COMBO SYSTEM SPECIFICATIONS For complete specifications see www.samtec.com?PETC or www.samtec.com?PESC Insulator Material: Black LCP Terminal Material: Copper Alloy Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating (Signal Pin): 5.7 A per pin (4 pins powered) Insertion Depth (Power Pin): (5,00 mm) .197" to (8,46 mm) .333" Wiping Distance (Power Pin): (0,38 mm) .015" Operating Temp Range: -55°C to +125°C for Au -55°C to +105°C for Sn Voltage Rating: Signal: 450 VAC/636 VDC Power: 650 VAC/919 VDC RoHS Compliant: Yes Lead–Free Solderable: Yes POWER PINS 1 2 3 4 PETC/PESC CURRENT RATING (PER CONTACT) 31.4 A 28.0 A 24.4 A 22.9 A PETC POWER PINS SIGNAL PINS POWER PINS –12 –40 –01, –02, –04 PLATING OPTION TAIL –L =Vertical = 10µ" (0,25 µm) Gold on contact area, Matte Tin on tail –RA 01 –01, –02, –04 A 04 –VT = Right Angle –T 01 (2,54) .100 (0,64) .025 SQ (6,35) .250 TYP –SD = Screw Down (Right Angle only) –LC = Matte Tin (14,50) .571 (11,43) .450 OTHER OPTION = Locking Clip (Manual placement required) (23,50) .925 (3,81) .150 DIA (14,50) .571 (2,54) .100 (5,77) .227 –RA–SD (14,62) .575 A POWER PINS/END 12 SIGNAL PINS 40 SIGNAL PINS –01 –02 –04 (2,35) .093 (2,54) .100 (0,50) .020 (39,37) 1.550 (57,15) 2.250 (52,07) 2.050 (69,85) 2.750 (77,47) 3.050 (95,25) 3.750 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality PESC POWER PINS SIGNAL PINS ALSO AVAILABLE (MOQ Required) • Other signal pins • Power pins • Asymmetric power pin placement • Other platings Contact Samtec. POWER PINS –12 –40 –01, –02, –04 PLATING OPTION TAIL –L =Vertical = 10µ" (0,25 µm) Gold on contact area, Matte Tin on tail –RA 01 –01, –02, –04 –T 04 –SD = Screw Down (Right Angle only) = Right Angle –LC = Matte Tin (12,00) .472 (2,54) .100 01 (6,35) .250 TYP = Locking Clip (Manual placement required) (25,20) .992 (3,81) .150 DIA MATED HEIGHT (12,00) .472 (4,40) .173 (19 mm) .748" –RA–SD (12,64) .497 (2,47) .097 Note: The number of power pins on each end must equal. Note: Some sizes, styles and options are non-standard, non-returnable. –VT A (11,43) .450 OTHER OPTION (2,54) .100 (0,79) .031 X (0,41) .016 (0,50) .020 (4,29) .169 (2,54) .100 A POWER PINS/END 12 SIGNAL PINS 40 SIGNAL PINS –01 –02 –04 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (39,37) 1.550 (57,15) 2.250 (52,07) 2.050 (69,85) 2.750 (77,47) 3.050 (95,25) 3.750