F-215 ET60T–00–24–04–L–RT1–GP–HS (5,50 mm) .217"(PWR) (2,54 mm) .100"(SIG) ET60T SERIES ET60T–02–24–02–L–RT1–GP–HS ™ EXTreme Ten60Power TERMINAL SPECIFICATIONS Mate available for coplanar and perpendicular board mating Mates with: ET60S For complete specifications and recommended PCB layouts see www.samtec.com?ET60T Guide Post Insulator Material: Black LCP Terminal Material: Signal: Phosphor Bronze Power: Copper Alloy Plating: Au or Sn over 50µ" (1,27 µm) Ni Current Rating: Power: 60 A max per blade (2 pins powered @ 95°C; 30°C temperature rise) Signal: 2.8 A max (6 pins powered @ 95°C; 30°C temperature rise) Operating Temp Range: -40°C to +105°C Voltage Rating: 250 V max RoHS Compliant: Yes Low 10 mm profile Up to 60 A per power blade Power only or signal/power combinations Processing: Lead–Free Solderable: Yes RECOGNITIONS ET60T POWER POS. LEFT For complete scope of recognitions see www.samtec.com/quality –00, –02, –03, –04, –06 SIGNAL POSITIONS POWER POS. RIGHT –00, –24 –00, –02, –03, –04, –06 –L = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail A B (Left) (Right) (00,00) .000 (13,00) .512 (18,50) .728 (24,00) .945 (35,00) 1.378 (00,00) .000 (13,00) .512 (18,50) .728 (24,00) .945 (35,00) 1.378 POWER POSITIONS –00 (10,00) .394 –02 –03 –04 (0,64) .025 SQ –06 A + C + B + (13,50) .531 (5,50) .217 (10,00)(8,00) .394 .315 (29,25) 1.152 Note: *EXTreme Ten60Power™ is a trademark of Molex Incorporated and is dual sourced by Molex® Note: Some lengths, styles and options are non-standard, non-returnable. (3,00) .118 (3,10) .122 (3,33) .131 DIA (9,40) .370 (17,78) .700 ± (0,15) .006 ET60T–03–24–00–L–RT1–GP–HS WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. Leave blank for no Hot Swap –HS = Hot Swap (Long pins, outer position power 10 mm, top row signal) SIGNAL POSITIONS –00 –24 (2,84) .112 (2,54) .100 OPTION GP RT1 PLATING (4,46) .176 (1,83) .072 C (00,00) .000 (23,26) .916