F-215 UPS–08–04.0–01–L–V TM 20 STRIP UPS–04–01–01–L–RA–LC UPS–04–07.0–03–L–PV (3,81 mm) .150" UPS SERIES DUAL LEAF 20 A POWER SOCKET SPECIFICATIONS Dual leaf blade contacts Mates with: UPT Up to 8 Power Pins For complete specifications see www.samtec.com?UPS Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold Voltage Rating: 375 VAC/530 VDC RoHS Compliant: Yes Lead–Free Solderable: Yes (-V, -RA options) UPT-V/UPS-V UPT-RA/UPS-RA CURRENT CURRENT PINS RATING RATING (PER CONTACT) (PER CONTACT) 1 23 A 23.5 A 2 18.6 A 20.1 A 3 17.5 A 16.9 A 4 16.7 A 15.5 A ALL 14 A 13.3 A -L PLATING Optional Locking Clip (3,81 mm) .150" pitch RECOGNITIONS Vertical, Right Angle or Press Fit For complete scope of recognitions see www.samtec.com/quality • Locking clip option POWER PINS UPS ALSO AVAILABLE LEAD STYLE –02, –04, –06, –08 (MOQ Required) • Solder leads for (2,36 mm) .093" thick board Contact Samtec. Press fit tooling available. Contact Samtec. A B –04.0 (3,75) .148 (6,75) .266 (6,75) .266 (9,75) .384 –07.0 –01 –L –V –LC = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail = Vertical (Not available with –T plating) = Locking Clip (Manual placement required) Not available with –PV option –04.0 = (07,0 mm) .276" (–V & –PV only) No. of power pins x (3,81) .150 + (6,76) .266 UPS LEAD STYLE UPT LEAD STYLE –04.0 (7,00) .276 –07.0 (10,00) .394 (5,00) .197 –03 = Use with (1,60 mm) .062" Thick PCB (–PV only) *Processing conditions will affect mated height. (2,00) .0787 (0,30) .012 (1,00) .039 DIA –PV No. of power pins x (3,81) .150 + (6,76) .266 (9,74) .384 –PV (3,81) .150 (3,00) .118 A = Right Angle = Matte Tin (–RA option only) (12,74) .502 (3,81) .150 (1,25) .049 –RA –T = Press Fit, Vertical (0,78) .031 (7,00) .276 –03.0 OTHER OPTION = Use with (1,60 mm) .062" Thick PCB (–V & –RA only) (2,20) .087 MATED HEIGHT* TAIL –01 = (04,0 mm) .157" (–V & –PV only) LEAD STYLE PLATING OPTION = RA only –07.0 TOOLING TAIL LENGTH B (2,00) .0787 (1,50) .059 –V (5,00) .197 (8,00) .315 (2,00) .0787 (1,54) .061 (0,30) .012 Note: Some sizes, styles and options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (2,82) .111 –RA (1,50) .059