MICRO TIGER EYE™ HEADER

TEMS–125–02–03.0–H–D
F-215
TEM–145–02–07.0–H–D–WT
™
SYSTEM
TEM–110–02–DH1–S–D–A
TEM–120–02–DH1–S–D–A
(0,80 mm) .0315"
TEM, TEMS, TEM-DH SERIES
™
MICRO TIGER EYE HEADER
TEM, TEM-DH Mates with:
SEM, SEML
TYPE
STRIP
NO. PINS
PER ROW
1
STACK
HEIGHT
02
PLATING
OPTION
D
OTHER
OPTION
OPTION
TEMS Mates with:
SEMS
SPECIFICATIONS
For complete specifications and
recommended PCB layouts
see www.samtec.com?TEM or
www.samtec.com?TEMS
Insulator Material:
Black Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Au or Sn over 50µ" (1,27 µm) Ni
Operating Temp Range:
-55°C to +125°C
Current Rating:
2.6 A per pin
(1 pin powered per row)
RoHS Compliant:
Yes
–FG
TEM
= Tiger Eye
Slim Strip
(TEM only)
(Standard sizes)
= 6 mm
Stack Height
= 7 mm
Stack Height
(No. of Positions
x (0,80) .0315)
02 + (3,35) .132
–07.0
TEMS
(0,80)
.0315
(No. of Positions x
(0,80) .0315) + (9,00) .354
(No. of Positions x
(0,80) .0315) + (7,00) .276
(5,00)
.197
STACK
HEIGHT
(3,70)
.146
1
TEM
• Latching option:
See TEM-L1 in Discrete
Wire Cable section.
• Board Stacking:
See SFM, TFM Series
• Cable Assemblies:
See SFSD, TFSD,
SESDT Series
Contact Samtec.
TEM
(0,25) .010
–A
–LC
= Locking Clip
(Not available with –A or –WT)
(Manual placement required)
–WT
= Weld Tab
(Not available with –A or –LC)
–TR
= Tape &
Reel
(Required
for TEMS)
MATED HEIGHT*
(WHEN MATED
WITH SEM/SEMS)
(5,610) .2209
(6,610) .2602
(9,610) .3783
*Processing conditions will
affect mated height.
NO. OF
POSITIONS
02
6 mm
7 mm
10 mm
DH1
PLATING
OPTION
D
OPTION
(Standard sizes)
= Gold Flash on contact, Matte Tin on tail
= Alignment
Pin
(No. of Positions x (0,80) .0315) + (9,00) .354
= 10µ" (0,25 µm) Gold on contact,
Matte Tin on tail
–A
–F
10, 15, 20, 25, 30, 35, 40, 45, 50
–L
–S
= 30µ" (0,76 µm) Gold on contact,
Matte Tin on tail
ALSO AVAILABLE
(MOQ Required)
02
(No. of Positions x (0,80) .0315) + (4,00) .1575
(3,70)
.146
(6,00)
.236
01
Note: Some sizes, styles and
options are non-standard,
non-returnable.
A
–03.0
–04.0
–07.0
(8,50)
.335
• Other sizes
• Other platings
Contact Samtec.
= (5,50 mm)
.217" DIA
Polyimide
film Pick &
= Alignment Pin
(Not available with –LC or –WT) Place Pad
(Required
for TEMS)
= 30µ"
(0,76 µm)
Gold on
contact,
Gold Flash
on tail
A
–K
Leave blank for TEMS
(5,50) .217
02
01
–H
= 10 mm
Stack Height
01
For complete scope of
recognitions see
www.samtec.com/quality
–G
= 10µ"
(0,25 µm)
Gold on
contact,
Gold Flash
on tail
–04.0
™
(0,24)
.009
Lead-Free Solderable:
Yes
SMT Lead Coplanarity:
(0,10 mm) .004" max
OTHER
SOLUTIONS
30, 35, 40, 45, 50
TEMS
Processing:
RECOGNITIONS
05, 10, 15, 20, 25
= Tiger Eye™
Strip
= Gold Flash
–03.0
(1,21)
.048
(0,80)
(0,25)
.0315
.010
(No. of Positions x (0,80) .0315) + (7,00) .276
(0,30)
.012
(0,87)
.034
(6,28)
.247
(7,99) .315
(1,40)
.055
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
(0,50)
.0197
(1,27)
.050
DIA
–A OPTION