F-215 TMMH–116–04–L–6 TMMH–125–04–F–D–EP TM (2,00 mm) .0787" FLEXIBLE THROUGH-HOLE HEADER SPECIFICATIONS For complete specifications see www.samtec.com?TMMH Choice of 2, 3, 4, 5 and 6 rows on (2,00 mm) .0787" pitch Mates with: CLT, SQT, SQW, ESQT, TLE, SMM, MMS, TCSD Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating (TMMH/ESQT): 4.5 A per pin (1 pin powered per row) Current Rating (TMMH/SQT): 5.1 A per pin (1 pin powered per row) Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold Voltage Rating: 500 VAC mated with SQW RoHS Compliant: Yes Lead–Free Solderable: Yes (2,00 mm) .0787" APPLICATION Through-hole ALSO AVAILABLE (2,00 mm) .0787" (MOQ Required) • Other platings Contact Samtec. Retention Clip Option (–RC) RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality Note: Some lengths, styles and options are non-standard, non-returnable. 03 thru 50 06 300 See PTT Series. No. of rows x (2,00) .0787 Surface Mount 01 See previous page. See TMM Series. (2,00) .0787 No. of positions x (2,00) .0787 + Z 02 (2,92) .115 (4,70) –EC .185 –EP & –EPC (6,10) .240 –EL & –EBC (4,45) .175 – ES B C –01 –04 (6,45) (1,91) (2,57) .254 .075 .101 –05 (5,94) (1,65) (2,29) .234 .065 .090 –06 (8,74) (3,20) (3,53) .344 .126 .139 (2,00) .0787 (2,00) .0787 B 01 See TMM Series. A C (Shrouded option requires -D) 99 –T –D No. of positions x (2,00) .0787 (2,00) .0787 (2,00) .0787 –Q (2,00) .0787 B A See TMMS Series. Paste In Hole (PIH) processing. Contact Samtec ASP Group for part customization. A –F = Gold flash on post, Matte Tin on tail (7,67) (3,20) (2,46) .302 .126 .097 100 (6,35) .250 Right Angle Four Row Shrouded Four Row Vertical & Right Angle 295 LEAD STYLE Z OPTION Press Fit PLATING OPTION Specify LEAD STYLE from chart Other Solutions Low Profile LEAD STYLE NO. PINS PER ROW 1 TMMH C (0,50) .020 SQ (2,00) .0787 –5 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –6 –L = 10µ" (0,25 µm) Gold on post, Matte Tin on tail –T = Matte Tin TMMH–125–04–F–D–RA–ES TMMH–118–04–T–D–EL TMMH–110–04–L–D TMMH–109–01–L–D TMMH–120–01–L–D–RA Right angle option TMMH SERIES FLEX SHROUD OPTIONS –EL OPTION –EBC OPTION –ES OPTION APPLICATIONS SQT TMMH Optional end shrouds –EP OPTION –EPC OPTION HORIZONTAL ROW OPTION OTHER OPTIONS TAIL OPTION FLEX SHROUD OPTIONS –D –RA = Double Row (Required for Flex Shroud option) = Right Angle (Double & Triple Row only) (–ES, –EP, –EL Double Row only) (–EC, –EBC and –EPC not available) (–06 Lead style not available) Flex Shroud requires -D row & 9 pins/row minimum (For board-to-board interfaces. Will not mate with TCSD) –T = Triple Row B –ES = End Shroud –EP = End Shroud with Guide Post (2,62) .103 –5 = Five Row (2,00) .0787 –D– RA –6 LEAD STYLE D –01 E –01 –04 –05 (3,20) .126 –EL –T– RA (Lead style –01 only) = Six Row D = Retention Clip (Mates to TCSD) (Double row only, minimum position 4 and available only –06 lead style) = End Shroud with Locking Clip (Manual placement required) = Four Row LEAD STYLE –RC –EC (1,27) .050 –Q –“XXX” = Polarized Position (Specify position of omitted pin) E –D– RA –ES (–RA also available with other flex shroud options) (2,34) (6,60) .092 .260 (1,17) (2,62) (5,26) .046 .103 .207 (3,12) (5,26) .123 .207 –EBC X Y = End Shroud with Board Lock and Locking Clip (Boards are positively locked and cannot be unmated) (5,84) (4,45) .230 .175 –EPC –04 & (4,50) (3,02) –05 .177 .119 (3,20) .126 (2,44) .096 = End Shroud with Board Lock (Boards are positively locked and cannot be unmated) X (4,00) .157 (1,41) .056 –D– EBC (1,91) .075 DIA Y (2,03) .080 (1,83) .072 (2,29) .090 –D– EL –RC = End Shroud with Guide Post and Locking Clip (Manual placement required) –D– ES (1,83) .072 (1,41) .056 –D– EC (1,83) .072 (1,41) .056 –D– EPC WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –D– EP Y