50Ω MICROWAVE CABLE ASSEMBLIES

RF-13 (Rev 28AUG15)
BE25S–01SP1–02.0–02–0305
BE25S SERIES
50Ω MICROWAVE CABLE ASSEMBLIES
SPECIFICATIONS
Mates with:
BAR, SMA, SMP, 292PS
High performance 25 AWG
rugged solid dielectric microwave cable
For complete specifications
see www.samtec.com?BE25S
RF Connector:
Outer Contact Material:
Brass (SMA), Gold (SMP)
Center Contact Material:
Brass (SMA Plug)
BeCu (SMA & SMP Jack)
Insulator Material:
PTFE
Operating Temperature:
-65°C to +165°C
Insulator Resistance:
5,000 MΩ
Impedance:
50Ω
Frequency Range:
0~20 GHz (SMA),
DC to 20 GHz (SMP)
V.S.W.R:
1.3 max
RoHS Compliant:
Yes
APPLICATION
rugged
solid FEP
dielectric
Bulls Eye®
termination with
SMA or SMP
end option
MWC-2550-01
Cable:
Cable Type:
Low Loss Microwave Coax
Gauge:
25 AWG Silver plated Copper
Dielectric:
Solid FEP
Jacket Material:
FEP
Impedance:
50Ω ±1Ω
Propagation Delay:
3.84 nsec/meter
Capacitance:
75.4 pF/meter
END 2
OPTION
CABLE
TYPE
Specify
END 2
OPTION
from chart
BE25S
= Rugged solid FEP
Dielectric 25 AWG,
MWC-2550-01
Microwave Cable
PHASE
MATCHING
NO. OF
CABLES
OVERALL
LENGTH
–02
–02
= 2.0 Pico-second
(–0305 maximum
overall length)
= 2 phase matched
cable assemblies
XXXX
–05
= 5.0 Pico-second
(–0457 maximum
overall length)
–10.0
–04
= 4 phase matched
cable assemblies
–06
= 6 phase matched
cable assemblies
= 10.0 Pico-second
–08
= 8 phase matched
cable assemblies
XXXX = OAL (millimeters)
EXTRACTION
TOOLS
• –SCC41: CAT-EX-SCC-01
• SMP: CAT-EX-SMP-01
PROBE END
END 2
END 2 OPTIONS
–01SP1 = SMA
Straight Plug
(30µ" (0.76 µm) Gold on Center
Contact, Gold Flash on Shell)
–SCC41 = Bulls Eye®
Test Point
(30µ" (0.76 µm) Gold on Center
Contact, Gold Flash on Shell)
–00SJ7 = SMP
Straight Jack
(10µ" (0.25 µm) Gold on Center
Contact, Gold Flash on Shell)
–01BJ1 = SMA
Bulkhead Jack
(30µ" (0.76 µm) Gold on Center
Contact, Gold Flash on Shell)
–00RJ7 = SMP
Right Angle Jack
(10µ" (0.25 µm) Gold on Center
Contact, Gold Flash on Shell)
END 2 OPTIONS
Notes:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
Some lengths, styles and
options are non-standard,
non-returnable.
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
= Overall
Length
in millimeters
–0100
(100 mm) 3.94"
to
–9999
(9999 mm)
393.7"