F-215 (Rev 07AUG15) FCF8–20–01–L–03.00–S FCF8–10–01–L–03.00–S FCS8–10–01–L–S–A–TR FCS8–20–01–L–S–A–TR (0.80 mm) .0315" FCF8, FCS8 SERIES HIGH SPEED COST EFFECTIVE COAX CABLE SPECIFICATIONS For complete specifications see www.samtec.com?FCF8 Cable: 38 AWG coax Overmold: Nylon Terminal Material: Phosphor Bronze Contact Plating: Au or Sn over 50µ" (1.27 µm) Ni Operating Temp Range: -25°C to +105°C Current Rating: 1.8 A per pin (1 pin powered per row) RoHS Compliant: Yes RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality NO. OF POSITIONS FCF8 Mates with: FCS8 CABLE LENGTH PLATING OPTION 01 –L –10, –20, –30 –“XX.XX” = 10µ" (0.25 µm) Gold on contact, Matte Tin on tail = Length in Inches 03.00" (76.2 mm) minimum CABLE LENGTH + (16.43) .647 NO. OF POSITIONS 01 N A GND (27.85) (35.00) 1.096 1.378 • Other sizes and lengths Contact Samtec. (2.42) .095 NO. OF POSITIONS FCS8 Mates with: FCF8 PLATING OPTION 01 –10, –20, –30 S A TR –L –TR = 10µ" (0.25 µm) Gold on contact, Matte Tin on tail = Tape & Reel A (0.30) .012 (0.80) .0315 NO. OF A B C D POSITIONS (16.59) .653 (15.56) .613 (10.70) .421 (13.06) .514 –10 (24.59) .968 (23.56) .928 (18.70) .736 (21.06) .829 –20 (32.59) 1.283 (31.56) 1.243 (26.70) 1.051 (29.06) 1.144 –30 (7.46) .294 (7.48) .294 B For complete scope of recognitions see www.samtec.com/quality Note: Some lengths, styles and options are non-standard, non-returnable. –30 (MOV Required) SPECIFICATIONS RECOGNITIONS (19.85) (27.00) .781 1.063 ALSO AVAILABLE (12.55) .494 Note: Some lengths, styles and options are non-standard, non-returnable. Lead–Free Solderable: Yes SMT Lead Coplanarity: (0.15 mm) .006" max –20 N Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. Processing: B –10 B Note: Design your High Speed Cable with Samtec’s High Speed Cable Solutionator® at www.samtec.com/hdr Insulator Material: Black LCP Contact Material: BeCu Contact Plating: Au or Sn over 50µ" (1.27 µm) Ni Shield: Nickel Plated Phosphor Bronze Operating Temp Range: -55°C to +125°C Current Rating: 1.8 A per pin (1 pin powered per row) RoHS Compliant: Yes A (11.85) (19.00) .467 .748 GND GND 01 GND For complete specifications and recommended PCB layouts see www.samtec.com?FCS8 S • Weld tabs • Positive latching C D (0.49) .019 (1.85) .073 (0.20) .008 (1.32) .052 DIA WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. • Shielded for EMI protection