F-215 IMS5–02–02 TM STRIP 30 MPT–04–01–01–L–RA–SD MPT–04–6.30–01–L–V CC46L–1416–01–L (5,00 mm) .1969" IMS5, CC46, MPT SERIES DISCRETE WIRE COMPONENTS & TOOLING SPECIFICATIONS For complete specifications see www.samtec.com?IMS5 or www.samtec.com?CC46 TOOLING IMS5 PLATING OPTION NO. OF POSITIONS 02 –02, –03, –04, –06, –08 –02 –L = Plastic Latch = 10µ" (0,25 µm) Gold on contact TYPE = Body, Loose 1416 TYPE –1416 CC46L = 14 to 16 AWG = Contact, Loose • Hand tool: CAT-HT-246-1416-11 01 CC46R –T = Contact, Full Reel = Matte Tin (18,56) .730 (22,59) .890 (1,91) .075 • Mini Applicator: CAT-MA-246-1416-XX-02 (3,81) .150 (8,50) .335 Contact Material: Copper Alloy Insulator & Latch Material: Nylon 6/6 Mates with: MPS, MPSS MPT POWER PINS (1,59) .063 DIA LEAD STYLE TAIL LENGTH PLATING OPTION –01 –L –V –6.30 = Use with (1,60 mm) .062" Thick PCB = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail = Vertical –SD –RA –03 –T = Screw Down (–RA only) = Use with (2,36 mm) .093" Thick PCB = Matte Tin TAIL SD SPECIFICATIONS For complete specifications see www.samtec.com?MPT Insulator Material: Black LCP Terminal Material: Copper Alloy Plating: Sn or Au over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold Voltage Rating: 600 VAC/848 VDC RoHS Compliant: Yes Lead–Free Solderable: Yes –02, –03, –04, –06, –08 = (6,30 mm) 0.248" (–V only) –01 = Right Angle (–RA only) (3,56) .140 DIA (12,45) .490 (12,27) (14,81) .583 .483 (6,27) .247 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality (5,00) .1969 TYP No. of positions x (5,00) .1969 + (7,55) .297 (11,38) .448 Note: Some lengths, styles and options are non-standard, non-returnable. = Right angle (2,72) .107 (2,54) .100 (1,88) .074 (12,45) .490 (0,41) .016 (1,88) .074 –RA–SD SHOWN –V SHOWN (2,72) .107 (3,25) .128 (2,54) .100 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice.