T1M–07–GF–S–V F-215 ISS1–10 T1M–10–GF–DV CC09R–01–GF T1M–15–GF–S–RA ISD1–07 (1,00 mm) .0394" ISS1, ISD1, CC09, T1M SERIES DISCRETE WIRE COMPONENTS & TOOLING SPECIFICATIONS TYPE Insulator Material: ISS1: Black LCP ISD1: Natural Nylon ISS1 –02, –03, –05, –07, –10, –15, –20 = Single Row Body (Single Row only) ISD1 –02, –03, –04, –05, –10 TOOLING • Hand tool: CAT-HT-309-2830-12 • Clamp for mounting hand tool to work table: CAT-HT-MNT-01 CC09R = Contact, Full Reel (30,000 Parts per Reel) –T = Tin = Contact, Mini Reel (5,000 Parts per Reel) (3,60) .141 • Mini Applicator: CAT-MA-309-2830-XX-01 (1,00) .03937 (1,00) (1,00 0) .03937 039 No. of positions x (1,00) .03937 + (1,20) .047 (9,01) .355 (2,76) .109 (2,10) .083 T1M Contact Material: Phosphor Bronze ISD1 ISS1 NO. OF POSITIONS (3,81) .150 (3,60) .141 No. of positions x (1,00) .03937 + (5,30) .209 Mates with: S1SS(T), S1SD(T) = 3µ" (0,07 µm) Gold contact and tail CC09M No. of positions x (1,00) .03937 + (7,30) .287 No. of positions x (1,00) .03937 + (3,00) .118 PLATING –GF (Double Row only) = Double Row Body 01 TYPE NO. OF POSITIONS For complete specifications see www.samtec.com?ISS1, www.samtec.com?ISD1 or www.samtec.com?CC09 PLATING OPTION ROW OPTION TAIL OPTION –GF Leave blank for double row –RA OPTION TR –K –TR SPECIFICATIONS For complete specifications see www.samtec.com?T1M Insulator Material: Black LCP (Single Row) Natural LCP (Double Row) Terminal Material: Phosphor Bronze Weld Tab: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +85°C Current Rating: 3.3 A per pin (1 pin powered) Voltage Rating: 250 VAC/353 VDC RoHS Compliant: Yes RECOGNITIONS –02, –03, –05, –07, –10, –15, –20 (Single Row only) –02, –03, –04,–05, –10 = Right Angle –S –V = Single Row –T = Vertical –DH = Tin = Double Row Horizontal (Double Row only) No. of positions x (1,00) .03937 + (2,00) .079 (1,00) .03937 No. of positions x (1,00) .03937 + (7,10) .280 (2,90) .114 For complete scope of recognitions see www.samtec.com/quality = (4,00 mm) .157" DIA Polyimide Film Pick & Place Pad (–V & –DV only) = Double Row Vertical (1,00) 0) 3 .03937 = Tape & Reel No. of positions x (1,00) .03937 + (9,00) .354 –DV (3,95) .156 (6,25) .246 (4,30) .169 (4,25) .167 (0,20) .008 (7,55) .297 (1,00)) .03937 03937 –V (6,80) ,80) .268 6 (4,50) .177 (4,95) .195 (1,00) .03937 Note: Some lengths, styles and options are non-standard, non-returnable. = 3µ" (0,07 µm) Gold contact and tail –RA (0,80) 0, ) .031 0 DIA (0,20) ,20) .008 .00 08 (0,60) (0,30) No. of positions .012 .024 x x (1,00) .03937 (0,80) + (1,50) .059 .031 (6,70) .264 (0,30) .012 –DV WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (0,20) .008 No. of positions x (1,00) .03937 + (7,85) .309 –DH