Surface Mount Transient Voltage Suppressors (TVS) 8.0SMDJ Series 22 To 36 V 8000W Uni-directional Description Bi-directional The 8.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 8000W Peak power capability at 10 × 1000µs waveform Functional Diagram Repetition rate (duty cycle):0.01% u Very fast response time u RoHS compliant Applications Bi-directional TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings Cathode Anode Uni-direction (TA=25℃ unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power Dissipation on Infinite Heat Sink at TL=75°C Unit PPPM 8000 Watts IPP See Next Table Amps PM(AV) 6.5 Watt IFSM 300 Amps VF 3.5/5.0 Voltage TJ , TSTG -55 to +150 °C Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) Operating junction and Storage Temperature Range. Value Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. Electrical Characteristics (TA=25℃ unless otherwise noted) Part Number Marking Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Maximum Peak Reverse Pulse Leakage IR Current @VRWM IPP (A) (μA) Uni Bi Uni Bi MIN MAX 8.0SMDJ22A 8.0SMDJ22CA 8PEX 8BEX 22 24.4 26.9 1 35.5 225 5 8.0SMDJ24A 8.0SMDJ24CA 8PEZ 8BEZ 24 26.7 29.5 1 38.9 206 5 8.0SMDJ26A 8.0SMDJ26CA 8PFE 8BFE 26 28.9 31.9 1 42.1 190 5 8.0SMDJ33A 8.0SMDJ33CA 8PFM 8BFM 33 36.7 40.6 1 53.3 150 5 8.0SMDJ36A 8.0SMDJ36CA 8PFP 8BFP 36 40.0 44.2 1 58.1 138 5 SOCAY Electronics Co., Ltd. Revision February 13, 2014 www.socay.com 1/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 8.0SMDJ Series 22 To 36 V 8000W I-V Curve Characteristics Uni-directional Bi-directional I I IPP IF VC VC V VBR VRW R IT IR VF IT VBR VRW R V IR IT IR VRW VBR VC R IPP IPP Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 gram Temperature Cycle JESD22-A104 JEDEC DO-214AB Molded Plastic over glass passivated junction Color band denotes cathode except Bipolar Matte Tin-plated leads, Solderable per JESD22-B102D Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Case Polarity Terminal Soldering Parameters Reflow Condition Lead–free assembly TP Ramp-up Critical Zone TL to TP TL Pre Heat -Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (Ts) 60 -180 Seconds Temperature TS(max) Ramp-down TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Average ramp up rate ( Liquidus Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (TL) 60 -150 Seconds Reflow Time Peak Temperature (TP) Time within 5°C Temperature (tp) SOCAY Electronics Co., Ltd. Revision February 13, 2014 260 +0/-5°C of actual peak 20 -40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 280°C www.socay.com 2/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 8.0SMDJ Series 22 To 36 V 8000W Dimensions Inches DO-214AB / SMC Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.86 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - Cathode Band Part Numbering Part Marking 8.0SMDJ×××CA Socay Logo 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE Cathode Band Marking Code SERIES SOCAY Electronics Co., Ltd. Revision February 13, 2014 www.socay.com 3/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 8.0SMDJ Series 22 To 36 V 8000W Packaging Part Number Component Package Quantity 8.0SMDJXXXXX DO-214AB 500 Packaging Option Tape & Reel -16mm/7″tape Packaging Specification EIA STD RS-481 Tape and Reel Specifications 7.0 (177.8) 0.157 (4.0) 0.059 Diameter (1.5) 0.63 (16.0) 0.524 (13.3) 0.512(13.0) Arbor Hole Diameter 0.315 (8.0) Cover tape 0.646 (16.4) Direction of Feed Dimensions are in inches (and millimeters) SOCAY Electronics Co., Ltd. Revision February 13, 2014 www.socay.com 4/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information.