Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W Uni-directional Description Bi-directional The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u u u u u u u u u u u u u u u u u u u For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical IR less than 5μA above 25V. High Temperature soldering: 260°C/40 seconds at terminals Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT Plastic package has Underwriters Laboratory Flammability 94V-0 Matte tin lead–free Plated Halogen free and RoHS compliant Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) Maximum Ratings Functional Diagram Bi-directional Cathode Anode Uni-direction Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) PPPM 5000 Watts IPP See Next Table Amps PM(AV) 6.5 Watt Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 Amps Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) VF 3.5/5.0 Voltage TJ , TSTG -55 to +150 °C Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power Dissipation on Infinite Heat Sink at TL=75°C Operating junction and Storage Temperature Range. Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 1/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W Electrical Characteristics (TA=25℃ unless otherwise noted) Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM (V) 5.0SMDJ11 5.0SMDJ11A 5.0SMDJ12 5.0SMDJ12A 5.0SMDJ13 5.0SMDJ13A 5.0SMDJ14 5.0SMDJ14A 5.0SMDJ15 5.0SMDJ15A 5.0SMDJ16 5.0SMDJ16A 5.0SMDJ17 5.0SMDJ17A 5.0SMDJ18 5.0SMDJ18A 5.0SMDJ19 5.0SMDJ19A 5.0SMDJ20 5.0SMDJ20A 5.0SMDJ22 5.0SMDJ22A 5.0SMDJ24 5.0SMDJ24A 5.0SMDJ26 5.0SMDJ26A 5.0SMDJ28 5.0SMDJ28A 5.0SMDJ30 5.0SMDJ30A 5.0SMDJ33 5.0SMDJ33A 5.0SMDJ36 5.0SMDJ36A 5.0SMDJ40 5.0SMDJ40A 5.0SMDJ43 5.0SMDJ43A 5.0SMDJ45 5.0SMDJ45A 5.0SMDJ48 5.0SMDJ48A 5.0SMDJ51 5.0SMDJ51A 5.0SMDJ54 5.0SMDJ54A 5.0SMDJ58 5.0SMDJ58A 5.0SMDJ11C 5.0SMDJ11CA 5.0SMDJ12C 5.0SMDJ12CA 5.0SMDJ13C 5.0SMDJ13CA 5.0SMDJ14C 5.0SMDJ14CA 5.0SMDJ15C 5.0SMDJ15CA 5.0SMDJ16C 5.0SMDJ16CA 5.0SMDJ17C 5.0SMDJ17CA 5.0SMDJ18C 5.0SMDJ18CA 5.0SMDJ19C 5.0SMDJ19CA 5.0SMDJ20C 5.0SMDJ20CA 5.0SMDJ22C 5.0SMDJ22CA 5.0SMDJ24C 5.0SMDJ24CA 5.0SMDJ26C 5.0SMDJ26CA 5.0SMDJ28C 5.0SMDJ28CA 5.0SMDJ30C 5.0SMDJ30CA 5.0SMDJ33C 5.0SMDJ33CA 5.0SMDJ36C 5.0SMDJ36CA 5.0SMDJ40C 5.0SMDJ40CA 5.0SMDJ43C 5.0SMDJ43CA 5.0SMDJ45C 5.0SMDJ45CA 5.0SMDJ48C 5.0SMDJ48CA 5.0SMDJ51C 5.0SMDJ51CA 5.0SMDJ54C 5.0SMDJ54CA 5.0SMDJ58C 5.0SMDJ58CA 5PDW 5PDX 5PDY 5PDZ 5PED 5PEE 5PEF 5PEG 5PEH 5PEK 5PEL 5PEM 5PEN 5PEP 5PEQ 5PER 5PES 5PET 5PEU 5PEV 5PEW 5PEX 5PEY 5PEZ 5PFD 5PFE 5PFF 5PFG 5PFH 5PFK 5PFL 5PFM 5PFN 5PFP 5PFQ 5PFR 5PFS 5PFT 5PFU 5PFV 5PFW 5PFX 5PFY 5PFZ 5PGD 5PGE 5PGF 5PGG 5BDW 5BDX 5BDY 5BDZ 5BED 5BEE 5BEF 5BEG 5BEH 5BEK 5BEL 5BEM 5BEN 5BEP 5BEQ 5BER 5BES 5BET 5BEU 5BEV 5BEW 5BEX 5BEY 5BEZ 5BFD 5BFE 5BFF 5BFG 5BFH 5BFK 5BFL 5BFM 5BFN 5BFP 5BFQ 5BFR 5BFS 5BFT 5BFU 5BFV 5BFW 5BFX 5BFY 5BFZ 5BGD 5BGE 5BGF 5BGG 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 19.0 19.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 Part Number Marking Breakdown Voltage VBR (V) @IT MIN MAX Test Current IT (mA) 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 21.13 21.10 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 33.30 36.70 36.70 40.00 40.00 44.40 44.40 47.80 47.80 50.00 50.00 53.30 53.30 56.70 56.70 60.00 60.00 64.40 64.40 14.90 13.50 16.30 14.70 17.60 15.90 19.10 17.20 20.40 18.50 21.80 19.70 23.10 20.90 24.40 22.10 25.76 23.30 27.10 24.50 29.80 26.90 32.60 29.50 35.30 31.90 38.00 34.40 40.70 36.80 44.90 40.60 48.90 44.20 54.30 49.10 58.40 52.80 61.10 55.30 65.10 58.90 69.30 62.70 73.30 66.30 78.70 71.20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SOCAY Electronics Co., Ltd. Revision September 25, 2013 Maximum Clamping Voltage VC @IPP (V) 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 34.0 30.8 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 Maximum Peak Pulse Current IPP (A) 251.24 277.47 229.55 253.77 212.18 234.88 195.74 217.67 187.73 206.97 175.35 194.23 165.57 182.97 156.83 172.95 148.49 164.07 141.06 155.86 128.17 142.25 117.44 129.82 108.37 119.95 101.00 111.23 94.39 104.34 85.59 94.75 78.54 86.92 70.73 78.29 65.84 72.77 62.89 69.46 59.06 65.25 55.43 61.29 52.44 57.98 49.03 53.95 Maximum Reverse Leakage IR @VRWM (μA) 800 800 800 800 500 500 200 200 100 100 50 50 20 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 www.socay.com 2/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V Electrical Characteristics (TA=25℃ unless otherwise noted) (Continue) Bi Uni Bi Reverse Stand-Off Voltage VRWM (V) 5.0SMDJ60C 5.0SMDJ60CA 5.0SMDJ64C 5.0SMDJ64CA 5.0SMDJ70C 5.0SMDJ70CA 5.0SMDJ75C 5.0SMDJ75CA 5.0SMDJ78C 5.0SMDJ78CA 5.0SMDJ80C 5.0SMDJ80CA 5.0SMDJ85C 5.0SMDJ85CA 5.0SMDJ90C 5.0SMDJ90CA 5.0SMDJ100C 5.0SMDJ100CA 5.0SMDJ110C 5.0SMDJ110CA 5.0SMDJ120C 5.0SMDJ120CA 5.0SMDJ130C 5.0SMDJ130CA 5.0SMDJ140C 5.0SMDJ140CA 5.0SMDJ150C 5.0SMDJ150CA 5.0SMDJ160C 5.0SMDJ160CA 5.0SMDJ170C 5.0SMDJ170CA 5.0SMDJ180C 5.0SMDJ180CA 5.0SMDJ190C 5.0SMDJ190CA 5.0SMDJ200CA 5.0SMDJ220CA 5.0SMDJ250CA 5.0SMDJ300CA 5.0SMDJ350CA 5.0SMDJ400CA 5.0SMDJ440CA 5PGH 5PGK 5PGL 5PGM 5PGN 5PGP 5PGQ 5PGR 5PGS 5PGT 5PGA 5PGB 5PGU 5PGV 5PGW 5PGX 5PGY 5PGZ 5PHD 5PHE 5PHF 5PHG 5PHH 5PHK 5PHA 5PHB 5PHL 5PHM 5PHN 5PHP 5PHQ 5PHR 5PHS 5PHT 5PHU 5PHV 5PHW 5PHX 5PHZ 5PJE 5PJG 5PJK 5PJM 5BGH 5BGK 5BGL 5BGM 5BGN 5BGP 5BGQ 5BGR 5BGS 5BGT 5BGA 5BGB 5BGU 5BGV 5BGW 5BGX 5BGY 5BGZ 5BHD 5BHE 5BHF 5BHG 5BHH 5BHK 5BHA 5BHB 5BHL 5BHM 5BHN 5BHP 5BHQ 5BHR 5BHS 5BHT 5BHU 5BHV 5BHW 5BHX 5BHZ 5BJE 5BJG 5BJK 5BJM 60.0 60.0 64.0 64.0 70.0 70.0 75.0 75.0 78.0 78.0 80.0 80.0 85.0 85.0 90.0 90.0 100.0 100.0 110.0 110.0 120.0 120.0 130.0 130.0 140.0 140.0 150.0 150.0 160.0 160.0 170.0 170.0 180.0 180.0 190.0 190.0 200.0 220.0 250.0 300.0 350.0 400.0 440.0 Part Number Uni 5.0SMDJ60 5.0SMDJ60A 5.0SMDJ64 5.0SMDJ64A 5.0SMDJ70 5.0SMDJ70A 5.0SMDJ75 5.0SMDJ75A 5.0SMDJ78 5.0SMDJ78A 5.0SMDJ80 5.0SMDJ80A 5.0SMDJ85 5.0SMDJ85A 5.0SMDJ90 5.0SMDJ90A 5.0SMDJ100 5.0SMDJ100A 5.0SMDJ110 5.0SMDJ110A 5.0SMDJ120 5.0SMDJ120A 5.0SMDJ130 5.0SMDJ130A 5.0SMDJ140 5.0SMDJ140A 5.0SMDJ150 5.0SMDJ150A 5.0SMDJ160 5.0SMDJ160A 5.0SMDJ170 5.0SMDJ170A 5.0SMDJ180 5.0SMDJ180A 5.0SMDJ190 5.0SMDJ190A 5.0SMDJ200A 5.0SMDJ220A 5.0SMDJ250A 5.0SMDJ300A 5.0SMDJ350A 5.0SMDJ400A 5.0SMDJ440A Note: 5000W Marking Breakdown Voltage VBR (V) @IT MIN MAX Test Current IT (mA) 66.70 66.70 71.10 71.10 77.80 77.80 83.30 83.30 86.70 86.70 88.96 88.80 94.40 94.40 100.00 100.00 111.00 111.00 122.00 122.00 133.00 133.00 144.00 144.00 155.68 155.00 167.00 167.00 178.00 178.00 189.00 189.00 201.00 201.00 211.21 211.00 224.00 246.00 279.00 335.00 391.00 447.00 492.00 81.50 73.70 86.90 78.60 95.10 86.00 102.00 92.10 106.00 95.80 108.80 97.60 115.00 104.00 122.00 111.00 136.00 123.00 149.00 135.00 163.00 147.00 176.00 159.00 190.40 171.00 204.00 185.00 218.00 197.00 231.00 209.00 244.80 220.00 258.40 232.00 247.00 272.00 309.00 371.00 432.00 494.00 543.00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @IPP (V) 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 139.0 126.0 143.2 129.6 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 250.6 226.8 268.0 243.0 287.0 259.0 304.0 275.0 322.2 291.6 340.1 307.8 324.0 356.0 405.0 486.0 567.0 648.0 713.0 Maximum Peak Pulse Current IPP (A) 47.20 52.17 44.30 49.03 40.40 44.69 37.69 41.74 36.33 40.08 35.27 38.97 33.44 36.86 31.56 34.59 28.21 31.17 25.77 28.53 23.60 26.17 21.86 24.16 20.15 22.27 18.84 20.78 17.60 19.50 16.61 18.36 15.67 17.32 14.85 16.41 9.26 8.43 7.41 6.17 5.29 4.63 4.21 Maximum Reverse Leakage IR @VRWM (μA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 3/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PPPM - Peak Pulse Power (kW) 100 10 1 0.1 0.1 1 10 100 td - Pulse Width (μs) 1000 60 40 20 0 0 25 50 75 100 125 TA-Ambient temperature(°C) 150 175 Figure 4 - Typical Junction Capacitance 100000 150 tr=10µsec Peak Value IPPM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM CJ – Junction Capacitance (pF) IPPM - Peak Pulse Current, % IRSM 80 10000 Figure 3 - Pulse Waveform 100 Half Value IPPM (IPPM/2) 50 10/1000µsec. Waveform as defined by R.E.A Bi-directional @zero bins 10000 Uni-directional @zero bins 1000 Uni-directional @VRWM 100 tc 0 0 10 Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @VRWM 1 1.0 2.0 t - Time (ms) 3.0 1.0 4.0 Figure 5 - Steady State Power Derating Curve 10.0 100.0 VBR-Reverse Breakdown Voltage (V) 1000.0 Figure 6 - Maximum Non-Repetitive Surge Current 300 8.0 IFSM-Peak Forward Surge Current (A) PM(AV), Steady State Power Dissipation (W) 100 7.0 6.0 5.0 4.0 3.0 2.0 1.0 TJ=TJ max. 8.3 ms Single Half Sine-Wave 250 200 150 100 0.0 0 25 50 75 100 125 150 TL - Lead Temperature(°C) 175 1 200 SOCAY Electronics Co., Ltd. Revision September 25, 2013 10 Number of Cycles at 60Hz 100 www.socay.com 4/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W I-V Curve Characteristics Uni-directional Bi-directional I I IPP IF VC VC V VBR VRW R VF IT IT VBR VRW R V IR IT IR VRW VBR VC R IPP IPP Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 gram Temperature Cycle JESD22-A104 JEDEC DO-214AB Molded Plastic over glass passivated junction Color band denotes cathode except Bipolar Matte Tin-plated leads, Solderable per JESD22-B102D Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Case Polarity Terminal Soldering Parameters Reflow Condition Lead–free assembly TP Ramp-up Critical Zone TL to TP TL Pre Heat -Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (Ts) 60 -180 Seconds Temperature TS(max) Ramp-down TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Average ramp up rate ( Liquidus Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (TL) 60 -150 Seconds Reflow Time Peak Temperature (TP) Time within 5°C Temperature (tp) SOCAY Electronics Co., Ltd. Revision September 25, 2013 260 +0/-5°C of actual peak 20 -40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 280°C www.socay.com 5/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W Dimensions Inches DO-214AB (SMC) Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.86 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - Cathode Band Part Numbering Part Marking 5.0SMDJ×××CA Socay Logo 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE Cathode Band Marking Code SERIES SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 6/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Surface Mount Transient Voltage Suppressors (TVS) 5.0SMDJ Series 11 To 440 V 5000W Packaging Part Number Component Package Quantity 5.0SMDJXXXXX DO-214AB 500 Packaging Option Tape & Reel -16mm/7″tape Packaging Specification EIA STD RS-481 Tape and Reel Specifications 7.0 (177.8) 0.157 (4.0) 0.059 Diameter (1.5) 0.63 (16.0) 0.524 (13.3) 0.512(13.0) Arbor Hole Diameter 0.315 (8.0) Cover tape 0.646 (16.4) Direction of Feed Dimensions are in inches (and millimeters) SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 7/7 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.