PRODUCT BRIEF DEVICE OVERVIEW M08036 3G/HD/SD Serial Digital Video Cable Equalizer The M08036 is a high-speed, low-power, adaptive co-axial cable equalizer designed to increase the maximum low-jitter transmission distance of serial digital video signals across commonly used bandwidth-limiting 75Ω coaxial cable. The M08036 is designed for data rates at 2.97 Gb/s, 1.485 Gb/s, and 270 Mb/s to support serial digital video transmission for standard definition (525i and 625i) and high definition (720p, 1080i, and 1080p) component video. The device also supports 8bit or 10-bit component digital video (RGB or YCbCr 4:4:4 sampled and YCbCr 4:2:2 or 4:2:0 sampled). This device automatically optimizes the transfer function based on the bit rate and cable length to minimize the inter-symbol interference (ISI) jitter caused by the cable and to remove the DC offset components introduced with the pathological video pattern and AC coupling in systems. The low-noise, high-gain equalizer allows for low jitter 2.97 Gb/s transmissions up to 100m (Belden 1694A), 1.485 Gb/s transmissions up to a length of 200m (Belden 1694A) and 120m (Belden 8281). At 270 Mb/s, cable lengths up to 400m (Belden 1694A) and 300m (Belden 8281) are supported. M08036 Serial Digital Video Cable Equalizer for 2.97 Gb/s, 1.485 Gb/s, and 270 Mb/s data rates > Applications Digital Video Recorders (DVR) Video Mixers and Switchers Surveillance / CCTV Cameras Industrial and Professional Cameras Digital Image Capture Devices Digital Video Displays Distribution Amplifiers Repeaters Figure 1 – M08036 Pin-out diagram T E C H N I C A L D ET A I L S Features Benefits Adaptive cable equalization Design flexibility and control Optimized data rates at 270 Mb/s, 1.485 Gb/s, and 2.97 Gb/s Single Chip Solution for multiple data rates Allows typical equalized length of up to 100m ( Belden 1694A) for transmissions at 2.97 Gb/s Allows typical equalized length of up to 200m (Belden 1694A) and 120m (Belden 8281) for transmissions at 1.485 Gb/s Allows typical equalized length of up to 400m (Belden 1694A) and 300m (Belden 8281) for transmissions at 270 Mb/s Extend industry standard cable lengths Extend industry standard cable lengths Extend industry standard cable lengths Mute and manual bypass mode Supports non standard rates Differential CML outputs (50 Ω on-chip terminations) Low cost integration Single 3.3V power supply Standard voltage supply supported Small form factor and foot print (4x4 mm², 16-pin QFN package) Industry standard package Low power dissipation Low power and thermal management costs Extended operating temperature range: –10°C to +85 °C Provides additional margin for various applications SD/ MUTE M08036 - Cable Equalizer THRESH CONTROL LOGIC 1 SDI EQUALIZER INPUT BUFFER CORE SDI SDO DC RESTORE OUTPUT BUFFER 0 SDO EQ_ BYP Figure 2 – M08036 Functional Block Diagram Package (RoHS Compliant) • 4x4 mm², 16-pin QFN For more product information, please visit www.mindspeed.com www.mindspeed.com/salesoffices General Information: (949) 579-3000 Headquarters – Newport Beach 4000 MacArthur Blvd., East Tower Newport Beach, CA 92660-3007 © 2011 Mindspeed Technologies, Inc. All rights reserved. Mindspeed and the Mindspeed logo are trademarks of Mindspeed Technologies. All other trademarks are the property of their respective owners. Although Mindspeed Technologies strives for accuracy in all its publications, this material may contain errors or omissions and is subject to change without notice. This material is provided as is and without any express or implied warranties, including merchantability, fitness for a particular purpose and non-infringement. Mindspeed Technologies shall not be liable for any special, indirect, incidental or consequential damages as a result of its use.