MAAV-007088

MAAV-007088
PIN Diode Based Variable
Attenuator, 50 - 1000 MHz
Rev. V2
Features










High Dynamic Range: 42dB Typical
Flat Attenuation vs. Frequency
High P1dB Compression
Operates on a Single +5V Supply:
50 Ohm Nominal Impedance
Lead-Free SOW-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT10-0019
Functional Schematic
Description
M/A-COM's MAAV-007088-000100 is a Voltage
Controlled PIN diode based  attenuator packaged
in a low cost, 16 lead wide body plastic SMT
package. The PIN diode design makes this part well
suited for applications where low distortion or high
linear operating power levels are required. These
attenuators are ideal for gain control in multi-channel
digital communications systems.
Pin Configuration
Ordering Information
Part Number
Package
MAAV-007088-000100
Bulk Packaging
MAAV-007088-0001TR
1000 piece reel
MAAV-007088-0001TB
Sample Test Board
Pin No.
Function
Pin No.
Function
1
GND
9
GND
2
RF IN
10
V CONTROL
3
GND
11
GND
4
GND
12
GND
5
GND
13
GND
6
GND
14
GND
7
V SUPPLY
15
RF OUT
8
GND
16
GND
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAV-007088
PIN Diode Based Variable
Attenuator, 50 - 1000 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 501
1.
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
Vcont.: +10 V
50 - 1000 MHz
dB
—
2.4
2.8
Dynamic Range
Vcont.: 0 V
50 - 1000 MHz
dB
33
42
—
Attenuation
Flatness
Attenuation: 0 to 20 dB
Attenuation: 20 to 30 dB
50 - 1000 MHz
50 - 1000 MHz
dB
dB
—
—
1.0
1.5
1.5
2.0
VSWR
Vcont.: 0 - 10V
50 - 1000 MHz
Ratio
—
1.7:1
2.1:1
Trise, Tfall
Ton, Toff
Transients
10%/90%, 90%/10%
50% Cntl to 90%/10% RF
In-band
—
µs
µs
mV
—
—
—
10
15
150
20
25
250
1 dB
Compression
Vcont.: 0 - 10V
100 MHz
500 MHz
1000 MHz
dBm
dBm
dBm
10
17
21
13
20
24
—
—
—
Input IP3
Vcont.: 0 - 10V
Two-tone inputs up to +10 dBm
100 MHz
1000 MHz
dBm
dBm
24
34
27
37
—
—
VCC
—
—
V
+4.75
+5.0
+5.25
I CC
VCC = 5.25 V
DC
mA
—
2
2.5
Control Current
—
DC
mA
—
2.7
3.5
Unit requires external .01 µF DC Blocks on RF lines.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Max. Input Power
50 - 500 MHz
500 - 1000 MHz
+24 dBm
+30 dBm
Voltages
VCC
Control Voltage
-1 V to +7.0 V
-1 V to +15 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +125°C
Pad Layout
MAAV-007088-000100
PAD LAYOUT
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Dimensions are in inches
All undefined pins are connected to ground
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAV-007088
PIN Diode Based Variable
Attenuator, 50 - 1000 MHz
Rev. V2
Typical Performance Curves
Attenuation vs. Frequency @ Control Voltage = 0V
Attenuation vs. Control Voltage @ 500 MHz
-30
-5
Attenuation (dB)
Attenuation (dB)
-35
-40
-45
-50
-15
-25
-35
-55
-45
-60
50
335
620
905
0
1
2
3
4
5
6
7
8
9
10
Control Voltage (V)
Fre que ncy (MHz )
Insertion Loss vs. Frequency @ Control Voltage = 10V
0.0
IL (dB)
-0.5
-1.0
-1.5
-2.0
-2.5
50
335
620
905
Frequency (MHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAV-007088
PIN Diode Based Variable
Attenuator, 50 - 1000 MHz
Rev. V2
Lead-Free, SOW-16†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAV-007088
PIN Diode Based Variable
Attenuator, 50 - 1000 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: