MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Features Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation: 30 dB Typical Insertion Loss: 1.5 dB Low Cost 1 Watt Power Handling Lead-Free QSOP-20 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS58-0001 Rev. V2 Functional Block Diagram Description M/A-COM’s MAPDCC0021 is an IC-based monolithic power divider in a low cost QSOP-20 plastic package. This 8-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in tape and reel. The MAPDCC0021 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. Pins 1, 3, 5, 7, 9, 12, 14, 16, 18, and 20 should be RF and DC grounded. Pin Configuration Pin No. Function Pin No. Function 1 GND 11 NC 2 RF 4 (OUT) 12 GND 3 GND 13 RF 8 (OUT) 4 RF 3 (OUT) 14 GND 5 GND 15 RF 7 (OUT) Ordering Information Part Number Package 6 RF 2 (OUT) 16 GND MAPDCC0021 Bulk Packaging 7 GND 17 RF 6 (OUT) MAPDCC0021-TR 1000 piece reel 8 RF 1 (OUT) 18 GND MAPDCC0021-TB Sample Test Board 9 GND 19 RF 5 (OUT) 10 RF IN 20 GND Note: Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50 Parameter Units Min Typ Max Insertion Loss Above 9.0 dB dB — 1.5 2.0 Isolation dB 20 30 — VSWR — — 1.7:1 2.0:1 dB — 0.4 0.8 Deg. — 5 10 Amplitude Balance Phase Balance Absolute Maximum Ratings 2,3 2. 3. 4. Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 Typical Performance Curves @ 25ºC Isolation vs. Frequency Lead-Free, QSOP-20† † Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPDCC0021 Low Cost Eight-Way GMIC SMT Power Divider 824 – 960 MHz Rev. V2 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support