PTDCCL/10/ series

PTDCCL/10/ series
TECHNICAL DATA
LED Power Supply
PTDCCL/10/ series is a 10 W independent constant current power supply, which provides high
efficiency and reduced weight and size. Constant output currents of 350 mA and 700 mA are
available, with a wide range input voltage of 95-240 Volt. Equipped with push-in terminals suitable
for 0.5÷2.5 mm² section cables.
Specifications
Item
Nominal Input Voltage
Frequency
Nominal Output Power
Minimum Load
Nominal Output Current
Maximum Output Voltage
Power Factor according to EN 61000-3-2
Maximum Ambient Temperature Ta
Maximum Case Temperatur on Tc point
Thermal Protection
Overload Protection
Overvoltage Protection
Short Circuit Protection (self-restoring)
Maximum Input Cables Section
Maximum Output Cables Section
Dimensions
Weight
PTDCCL/10/350
PTDCCL/10/700
95 - 240
50 - 60
10
3
350
700
35.7
17.9
Yes
40
75
80
Yes
Yes
Yes
Yes
2.5
2.5
22x144.5x22
56
Unit
V AC
Hz
W
W
mA
V
°C
°C
mm²
mm²
mm
g
Package
Package Dimensions (Unit:mm)
Connection Diagram
Notes
Standards References
• LEDs have to be connected in series only.
• Never use switches on secondary side.
15.03.2011
PTDCCL/10/ series
Safety:
Radio Interferencies:
Harmonics:
Immunity
EN 61347
EN 55015
EN 61000-3-2
EN 61547
1 of 1