PTDCC/3/ series TECHNICAL DATA LED Power Supply PTDCC/3/350 is a 3W direct constant current power supply for building in, which provides high efficiency and reduced weight and size. Steady output currents of 350 mA, 500 mA or 700 mA are available, with a wide range input voltage of 95-240 Volt. Equipped with screw terminals. Specifications Item Nominal Input Voltage Frequency Nominal Output Power Minimum Load Nominal Output Current Maximum Output Voltage Power Factor according to EN 61000-3-2 Maximum Ambient Temperature Ta Maximum Case Temperatur on Tc point Thermal Protection Overload Protection Overvoltage Protection Short Circuit Protection (self-restoring) Maximum Input Cables Section Maximum Output Cables Section Dimensions Weight PTDCC/3/350 95 - 240 PTDCC/3/700 220 - 240 700 5.0 Unit V AC Hz W W mA V 60 80 °C °C 50 - 60 3 1 350 12.5 Yes 60 80 Yes Yes Yes Yes 2.5 2.5 40x42x21 36 mm² mm² mm g Package Package Dimensions (Unit:mm) Connection Diagram Notes Standards References • LEDs have to be connected in series only. • Never use switches on secondary side. 11.01.2012 PTDCC/3/ series Safety: Radio Interferencies: Harmonics: Immunity EN 61347 EN 55015 EN 61000-3-2 EN 61547 1 of 1