CAX100 TECHNICAL DATA Laser Diode Collimator, Molded Plastic These data concern a full plastic aspherical plano-convex lens. It is specified for use as a collimator in combination with a diode laser. It can be mounted by use of glue or spring-loaded. Mechanical lock-mounting is not advisable because of possible distortions. Wavelength Parameters Unit 670 nm Design conditions N.A. Clear Aperture CA Designed with laser cover glass (BK7) on source side: Distance from source Glass thickness 0.20 4.1 -mm 0.55 0.25 mm mm 10.0 9.21 8.48 mm mm mm 35 80 mλ mλ 0.1 0.2 mm mm ∅ 6.28 mm -25 to 100 -10 to 75 °C °C Optical parameters Focal Length Back Focal Length BFL (incl BK7-glass) Free Working Distance FWD RMS mean RMS max. (±3σ) on axis on axis Optical Tolerance Field Radius Mechanical parameters Mounting hole diameter Dmh Other parameters: see drawing Environmental stability Storage Temperature Operating Temperature General Data: Transmission [%]: 90 Lens Material: Polycarbonate Specifications subject to change without notice. 11.03.2011 CAX100 1 of 2 Drawing Unit:mm 11.03.2011 CAX100 2 of 2