Philips Competence Centre Plastics B.V. 5722 650 3418 page 1/1 1997-12-10 1999-07-13 author: G Verkade specification sheet 190 -1 All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Optical Components Datasheet Plastic Collimator Lens CAX100 These data concern a full plastic aspherical plano-convex lens. It is specified for use as a collimator in combination with a diode laser. It can be mounted by use of glue or spring-loaded. Mechanical lockmounting is not advisable because of possible distortions. Wavelength Parameters Unit 670 nm Design conditions N.A. Clear Aperture CA Designed with laser cover glass (BK7) on source side: Distance from source Glass thickness 0.20 4.1 -mm 0.55 0.25 mm mm 10.0 9.21 8.48 mm mm mm 35 80 mλ mλ 0.1 0.2 mm mm ∅ 6.28 mm -25 to 100 -10 to 75 °C °C 5722 600 20173 N.V. PHILIPS' ELECTRONICS Optical parameters Focal Length Back Focal Length BFL (incl BK7-glass) Free Working Distance FWD RMS mean RMS max. (±3σ) on axis on axis Optical Tolerance Field Radius Mechanical parameters Alle rechten voorbehouden. Verveelvoudiging, geheel of gedeeltelijk is niet toegestaan dan met schriftelijke toestemming van de auteursrechthebbende. Mounting hole diameter Dmh Other parameters: see drawing Environmental stability Storage Temperature Operating Temperature General Data: Transmission [%]: 90 Lens Material: Polycarbonate Specifications subject to change without notice. Zemax catalogue file available.