ADNS-3150-001 al Small Form Factor Lens Description Co nfi de The ADNS-3150-001 small form factor (SFF) lens is designed for use with PixArt Imaging ADNS-3550 integrated COB sensor. Together with the LED, the ADNS3150-001 SFF lens provide the direct illumination and optical imaging necessary for proper operation of the sensor. ADNS-3150-001 SFF lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. n ti Data Sheet 12.90 (0.508) 1.70 (0.067) 1.66 (0.065) 9.00 (0.354) 55.60 .60 A ((0.220) 0.220 3.00 (0.118) CL 0.89 ± 0.15 (0.035 ± 0.006) 3.37 (0.133) 5.80 (0.228) 9.50 ((0.374) 0.3774) Pix Ar t 1.28 (0.050) 1.90 (0.075) .50 4X R 00.50 ((0.020) 0.020) A GATE (MAX. 0.2 mm PROTRUDE) EITHER SIDE 4.35 (0.171) 1.50 (0.059) 00.13 .13 ((0.005) 0.005) 0.62 (0.024) ILLUMINATION LENS SURFACE 3 0.62 (0.024) 4.46 (0.176) IMAGING LENS SURFACE 2 IMAGING LENS SURFACE 1 ILLUMINATION LENS SURFACE 1 1.96 (0.077) 0.599 ± 00.15 .15 (0.23 ± 00.006) .006) 0.88 ± 0.15 (0.35 ± 0.006) Figure 1. ADNS-315 ADNS-3150ADNS-3150-001 SFF lens outline drawings and details R 0.20 (0.008) ILLUMINATION LENS SURFACE 2 SECTION A–A 0.29 (0.011) NOTES: 1. DIMENSIONS IN MILLIMETERS (INCHES). 2. DIMENSIONAL TOLERANCE: ±0.1 mm UNLESS OTHERWISE SPECIFIED. 3. ANGULAR TOLERANCE: ±3 . 4. MAXIMUM FLASH: +0.2 mm. All specifications are based on the Mechanical Assembly Requirements. Numerical Aperture Min. NA Magnification 0.1642 -1 Design Wavelength λ 639 Depth of Field DOF ±0.1 Die Coverage Radius 0.85 Max. Units Conditions Image at nominal location nm mm mm Image circle radius Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation t C on fid e * Typical n ti Symbol al Lens Design Optical Performance Specifications Mounting Instructions for the ADNS-3150-001 Lens to the Base Plate An IGES format drawing file with design specifications for mouse base plate features is available. These features are useful in maintaining proper positioning Pix Ar and alignment of the ADNS-3150-001 when used with the PixArt Imaging Optical Sensor. This file can be obtained by contacting your local PixArt Imaging sales representative All rights reserved. No reproduce, copy or transform any portion is allowed. Data subject to change. PixArt Imaging Inc. E-mail: [email protected] AV02-1342EN - September 5, 2008