LED - Lamp ELD-470-324 16.11.2007 rev. 02 Radiation Type Technology Case Blue Standard InGaN/Al2O3 3 mm plastic lens Description High-power, high-speed blue LED with lens, standard 3 mm package allows compact design, housing without standoff leads 30,0 ±1,0 Ø3 4,3 Anode 0,7 1,5 0,5 0,65 Ø 2,9 2,5 Ø 2,8 Note: Special packages with standoff available on request Applications 1,0 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 30 mA IFM 300 mA PD 120 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -30 to +100 °C TSd 260 °C Typ Max Unit 3.5 4 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min VF Reverse voltage IR = 100 µA VR Luminous intensity IF = 20 mA Iv 300 mcd Peak wavelength IF = 20 mA λp 468 nm Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 35 nm Viewing angle IF = 20 mA ϕ 80 deg. Switching time IF = 20 mA tr, tf 40 ns 5 V *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-470-324 16.11.2007 40 150 30 IF (mA) e Φ (%) Radiant power Intensity (%) 200 100 50 0 Forward current vs. forward voltage (typical) 20 10 0 10 20 30 0 40 0 1 2 SPEKTRAL OUTPUT Ambient Temperature vs. maximal forward current 80 Max. forward current (mA) RELATIVE POWER OUTPUT(%) 4 40 100 60 40 20 0 300 350 400 450 500 550 30 20 10 0 -30 600 LIMINOUS INTENSITY vs TEMPERATUR at I = 10 mA F 30 60 90 4,0 FORWARD VOLTAGE vs TEMPERATURE IF=10mA 3,5 FORWARD VOLTAGE(V) 120 100 80 60 40 3,0 2,5 2,0 1,5 20 0 -30° 0 Ambient Temperature (°C) WAVELENGTH (nm) LIMINOUS INTENSYTY (%) 3 UF (V) IF (mA) 140 rev. 02 0° 30° 60° AMBIENT TEMPERATURE (°C) 90° 1,0 -30 0 30 60 90 AMBIENT TEMPERATUR(°C) We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545