ROITHNER 532

R OITHNER 532
•
•
•
•
v1 02/14
Green DPSS Laser Pointer
532 nm, <5 mW
IR Filter
Laser Class 3R
Description
ROITHNER 532 is a diode pumped solid state (DPSS) laser pointer emitting at 532 nm with rated output
power of <5 mW, utilizing a 808 nm pump laser diode with Nd:YVO4 crystal and IR filter. An integrated
Automatic Power Control (APC) unit with direct 532 nm feedback loop ensures excellent output power
stability. ROITHNER 532 features an indicator LED for safe operation, and is run by 2 x 1.5V AAA alkaline
batteries. It comes in a polished chrome metal housing.  Transport case and batteries included
Specifications
Parameter
Values
Typ.
Min.
Wavelength
Unit
Max.
532
Output Power
nm
3
Laser Class
5
mW
3R
Beam Mode
TEMoo
Operating Temperature
20
30
°C
Operating Humidity (rel.)
40
70
%
Storage Temperature
-20
60
°C
Body Material
brass, polished chrome finish
Lens Material
PMMA
Weight (incl. batteries)
75
Power Source
g
2 x 1.5 V AAA alkaline batteries
Outline and Components
145 mm
2
1
3
AAA
+
-
AAA
+
13 mm
-
No.
Function
1
laser beam outlet
2
laser push button (ON/OFF)
3
battery compartment
www.roithner-laser.com
1
Safety Instructions
•
•
•
•
•
•
•
This laser is intended for pointing out details on objects/blackboards during lecturing
Laser radiation, direct and indirect can be dangerous to the naked eye
o Before operating the laser pointer make sure nobody is in or near the projection area
o Do not look into the laser beam
o Do not point the laser into the sky
o Do not point the laser towards other humans or animals
o Do not point the laser towards vehicles
o Do not point the laser at mirrors or any reflective surfaces
Do not expose the laser pointer to high temperature, moisture, or vibration
Do not give the laser pointer to unauthorized persons
Do keep the laser pointer out of the reach of children
Do not open the device. Maintenance must only be carried out be qualified personal
This product is a class 3R laser device (EN 60825-1:2007)
Insertion/Replacement/Disposal of Batteries
•
•
•
•
•
Do only use brand new 1.5V AAA (micro) batteries of good quality
Make sure batteries are inserted with correct polarity
Batteries must not be short circuit or thrown into the fire
Do not attempt to recharge the batteries
Do not mix batteries of different charge state
As the end user, you are required by law, to return all flat batteries to your local waste
collection place. Disposal of batteries in the household waste is prohibited
 Protect your environment
Operation
Do never point the laser beam directly at persons/animals/vehicles
•
•
•
The laser pointer is switched ON and OFF by means of a push button (2)
If the push button (2) is pressed, the laser radiation emits through the laser outlet (1)
If the push button (2) is released, the laser radiation is stopped
•
This laser pointer has been designed for intermittent use. If operated over 3 minutes
continually, the temperature of the internal pump laser diode may exceed critical
threshold, thereby negatively affecting the laser pointers performance and life time
Disposal
Disposal of an unserviceable product has to be made in accordance with the relevant
statutory regulations effective in your country
© All Rights Reserved
The above specifications are for reference purpose only and subjected to change without prior notice
www.roithner-laser.com
2